Relationship between the grinding conditions in constant cutting grinding of fine-ceramics and AE Wave (1st report) - Formulation of the amplitude of AE wave

Takekazu Sawa, Yasushi Kuse, Kuniaki Unno, Toshimi Odaki, Susumu Tomita, Noboru Morita, Shinichi Toe

Research output: Contribution to journalArticle

Abstract

The relationship between the grinding conditions and AE wave in constant-cut surface grinding was considered for the purpose of examining the cognitive technology of a situation of grinding. Grinding of fine-ceramics generally advances by a brittle fracture. This report was considered the processing model of constant-cut surface grinding based on the Vickers hardness test. And, the amplitude of AE was formulated based on two kinds of cracks generated from this processing model. It was predicted that the amplitude of AE wave and the chip coefficient are a correlation. Some grinding experiments were conducted in order to examine the validity of the calculation formula. As a result, although some problems remained, relationship between the grinding conditions and the amplitude of AE wave was clarified. From this result, the guideline which predicts the situation of grinding using the amplitude of AE wave was acquired.

Original languageEnglish
Pages (from-to)878-882
Number of pages5
JournalSeimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
Volume77
Issue number9
Publication statusPublished - 2011 Sep
Externally publishedYes

Fingerprint

Vickers hardness
Brittle fracture
Processing
Cracks
Experiments

Keywords

  • AE
  • Amplitude
  • Constant-cut surface grinding
  • Fine-ceramics
  • Formulation
  • Grinding conditions

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Relationship between the grinding conditions in constant cutting grinding of fine-ceramics and AE Wave (1st report) - Formulation of the amplitude of AE wave. / Sawa, Takekazu; Kuse, Yasushi; Unno, Kuniaki; Odaki, Toshimi; Tomita, Susumu; Morita, Noboru; Toe, Shinichi.

In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, Vol. 77, No. 9, 09.2011, p. 878-882.

Research output: Contribution to journalArticle

@article{f219d4f2e60945a49b82c4298d117013,
title = "Relationship between the grinding conditions in constant cutting grinding of fine-ceramics and AE Wave (1st report) - Formulation of the amplitude of AE wave",
abstract = "The relationship between the grinding conditions and AE wave in constant-cut surface grinding was considered for the purpose of examining the cognitive technology of a situation of grinding. Grinding of fine-ceramics generally advances by a brittle fracture. This report was considered the processing model of constant-cut surface grinding based on the Vickers hardness test. And, the amplitude of AE was formulated based on two kinds of cracks generated from this processing model. It was predicted that the amplitude of AE wave and the chip coefficient are a correlation. Some grinding experiments were conducted in order to examine the validity of the calculation formula. As a result, although some problems remained, relationship between the grinding conditions and the amplitude of AE wave was clarified. From this result, the guideline which predicts the situation of grinding using the amplitude of AE wave was acquired.",
keywords = "AE, Amplitude, Constant-cut surface grinding, Fine-ceramics, Formulation, Grinding conditions",
author = "Takekazu Sawa and Yasushi Kuse and Kuniaki Unno and Toshimi Odaki and Susumu Tomita and Noboru Morita and Shinichi Toe",
year = "2011",
month = "9",
language = "English",
volume = "77",
pages = "878--882",
journal = "Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering",
issn = "0912-0289",
publisher = "Japan Society for Precision Engineering",
number = "9",

}

TY - JOUR

T1 - Relationship between the grinding conditions in constant cutting grinding of fine-ceramics and AE Wave (1st report) - Formulation of the amplitude of AE wave

AU - Sawa, Takekazu

AU - Kuse, Yasushi

AU - Unno, Kuniaki

AU - Odaki, Toshimi

AU - Tomita, Susumu

AU - Morita, Noboru

AU - Toe, Shinichi

PY - 2011/9

Y1 - 2011/9

N2 - The relationship between the grinding conditions and AE wave in constant-cut surface grinding was considered for the purpose of examining the cognitive technology of a situation of grinding. Grinding of fine-ceramics generally advances by a brittle fracture. This report was considered the processing model of constant-cut surface grinding based on the Vickers hardness test. And, the amplitude of AE was formulated based on two kinds of cracks generated from this processing model. It was predicted that the amplitude of AE wave and the chip coefficient are a correlation. Some grinding experiments were conducted in order to examine the validity of the calculation formula. As a result, although some problems remained, relationship between the grinding conditions and the amplitude of AE wave was clarified. From this result, the guideline which predicts the situation of grinding using the amplitude of AE wave was acquired.

AB - The relationship between the grinding conditions and AE wave in constant-cut surface grinding was considered for the purpose of examining the cognitive technology of a situation of grinding. Grinding of fine-ceramics generally advances by a brittle fracture. This report was considered the processing model of constant-cut surface grinding based on the Vickers hardness test. And, the amplitude of AE was formulated based on two kinds of cracks generated from this processing model. It was predicted that the amplitude of AE wave and the chip coefficient are a correlation. Some grinding experiments were conducted in order to examine the validity of the calculation formula. As a result, although some problems remained, relationship between the grinding conditions and the amplitude of AE wave was clarified. From this result, the guideline which predicts the situation of grinding using the amplitude of AE wave was acquired.

KW - AE

KW - Amplitude

KW - Constant-cut surface grinding

KW - Fine-ceramics

KW - Formulation

KW - Grinding conditions

UR - http://www.scopus.com/inward/record.url?scp=80053525655&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80053525655&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:80053525655

VL - 77

SP - 878

EP - 882

JO - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

JF - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

SN - 0912-0289

IS - 9

ER -