Repeated bulk mechanical alloying of functional metallic alloys

Junji Kihara, Tatsuhiko Aizawa, Osamu Kobayashi

Research output: Contribution to journalArticle

17 Citations (Scopus)

Abstract

Repeated bulk mechanical alloying is proposed to yield a billet of functional metallic alloys with nano-structured system. Owing to plastic deformation and flow with fractures in the cyclic loading for bulk mechanical alloying, refining and alloying processes take place with increase of cyclic loading. Both Pb-Al and Cu-Co systems are employed not only to make experimental demonstration of validity and effectiveness of our developed mechanical alloying but also to investigate features of refining and alloying processes in this bulk mechanical alloying.

Original languageEnglish
Pages (from-to)41-46
Number of pages6
JournalMaterials Science Forum
Volume235-238
Issue numberPART 1
Publication statusPublished - 1997
Externally publishedYes

Fingerprint

Mechanical alloying
alloying
Alloying
Refining
refining
Plastic flow
Plastic deformation
billets
Demonstrations
plastic flow
plastic deformation

Keywords

  • Alloying
  • Atomic size factor
  • Bulk mechanical alloying
  • Cu-Co
  • Cyclic loading
  • Flow stress
  • Pb-Al
  • Plastic deformation
  • Plastic flow
  • Refining

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Kihara, J., Aizawa, T., & Kobayashi, O. (1997). Repeated bulk mechanical alloying of functional metallic alloys. Materials Science Forum, 235-238(PART 1), 41-46.

Repeated bulk mechanical alloying of functional metallic alloys. / Kihara, Junji; Aizawa, Tatsuhiko; Kobayashi, Osamu.

In: Materials Science Forum, Vol. 235-238, No. PART 1, 1997, p. 41-46.

Research output: Contribution to journalArticle

Kihara, J, Aizawa, T & Kobayashi, O 1997, 'Repeated bulk mechanical alloying of functional metallic alloys', Materials Science Forum, vol. 235-238, no. PART 1, pp. 41-46.
Kihara J, Aizawa T, Kobayashi O. Repeated bulk mechanical alloying of functional metallic alloys. Materials Science Forum. 1997;235-238(PART 1):41-46.
Kihara, Junji ; Aizawa, Tatsuhiko ; Kobayashi, Osamu. / Repeated bulk mechanical alloying of functional metallic alloys. In: Materials Science Forum. 1997 ; Vol. 235-238, No. PART 1. pp. 41-46.
@article{548d3273e06940ca970bb9b653097d43,
title = "Repeated bulk mechanical alloying of functional metallic alloys",
abstract = "Repeated bulk mechanical alloying is proposed to yield a billet of functional metallic alloys with nano-structured system. Owing to plastic deformation and flow with fractures in the cyclic loading for bulk mechanical alloying, refining and alloying processes take place with increase of cyclic loading. Both Pb-Al and Cu-Co systems are employed not only to make experimental demonstration of validity and effectiveness of our developed mechanical alloying but also to investigate features of refining and alloying processes in this bulk mechanical alloying.",
keywords = "Alloying, Atomic size factor, Bulk mechanical alloying, Cu-Co, Cyclic loading, Flow stress, Pb-Al, Plastic deformation, Plastic flow, Refining",
author = "Junji Kihara and Tatsuhiko Aizawa and Osamu Kobayashi",
year = "1997",
language = "English",
volume = "235-238",
pages = "41--46",
journal = "Materials Science Forum",
issn = "0255-5476",
publisher = "Trans Tech Publications",
number = "PART 1",

}

TY - JOUR

T1 - Repeated bulk mechanical alloying of functional metallic alloys

AU - Kihara, Junji

AU - Aizawa, Tatsuhiko

AU - Kobayashi, Osamu

PY - 1997

Y1 - 1997

N2 - Repeated bulk mechanical alloying is proposed to yield a billet of functional metallic alloys with nano-structured system. Owing to plastic deformation and flow with fractures in the cyclic loading for bulk mechanical alloying, refining and alloying processes take place with increase of cyclic loading. Both Pb-Al and Cu-Co systems are employed not only to make experimental demonstration of validity and effectiveness of our developed mechanical alloying but also to investigate features of refining and alloying processes in this bulk mechanical alloying.

AB - Repeated bulk mechanical alloying is proposed to yield a billet of functional metallic alloys with nano-structured system. Owing to plastic deformation and flow with fractures in the cyclic loading for bulk mechanical alloying, refining and alloying processes take place with increase of cyclic loading. Both Pb-Al and Cu-Co systems are employed not only to make experimental demonstration of validity and effectiveness of our developed mechanical alloying but also to investigate features of refining and alloying processes in this bulk mechanical alloying.

KW - Alloying

KW - Atomic size factor

KW - Bulk mechanical alloying

KW - Cu-Co

KW - Cyclic loading

KW - Flow stress

KW - Pb-Al

KW - Plastic deformation

KW - Plastic flow

KW - Refining

UR - http://www.scopus.com/inward/record.url?scp=0030784757&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030784757&partnerID=8YFLogxK

M3 - Article

VL - 235-238

SP - 41

EP - 46

JO - Materials Science Forum

JF - Materials Science Forum

SN - 0255-5476

IS - PART 1

ER -