Resonance frequency of carriages for linear roller guides

Yasunori Sakai, Masaomi Tsutsumi

Research output: Contribution to conferencePaper

Abstract

This paper describes the vibration responses of a single carriage from a linear roller guide. These responses were detected by an accelerometer and were analyzed by an FFT analyzer. From the experimental results, it was found that the number of rollers contacting the carriage raceway governs the resonance frequency. In addition, the surface profile of each carriage raceway was measured using a surface profile measuring instrument. It was determined that the raceway surface profile may also influence the resonance frequency of the carriage.

Original languageEnglish
Publication statusPublished - 2011 Dec 1
Event6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011 - Omiya Sonic City, Saitama, Japan
Duration: 2011 Nov 82011 Nov 10

Conference

Conference6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011
CountryJapan
CityOmiya Sonic City, Saitama
Period11/11/811/11/10

    Fingerprint

Keywords

  • Carriage
  • Frequency response
  • Impulse excitation
  • Linear roller guide
  • Raceway profile
  • Resonance frequency

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

Sakai, Y., & Tsutsumi, M. (2011). Resonance frequency of carriages for linear roller guides. Paper presented at 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011, Omiya Sonic City, Saitama, Japan.