Signal transmission loss on printed circuit board in GHz frequency region

Takaaki Okubo, Toshio Sudo, Toshihiro Hosoi, Hiroaki Tsuyoshi, Fujio Kuwako

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Abstract

Higher-speed signal transmission is strongly required on a printed circuit board to handle massive data in electronic systems. So, signal transmission loss of copper wiring on a printed circuit board has been studied First, total signal loss was divided into dielectric loss and conductor loss quantitatively based on electromagnetic theory. In particular, the scattering loss due to surface roughness of copper foil has been examined in detail And the usefulness of the copper foil with low surface roughness has been demonstrated

Original languageEnglish
Title of host publicationEDAPS 2013 - 2013 IEEE Electrical Design of Advanced Packaging Systems Symposium
Pages112-115
Number of pages4
DOIs
Publication statusPublished - 2013
Event2013 6th IEEE Electrical Design of Advanced Packaging Systems Symposium, EDAPS 2013 - Nara
Duration: 2013 Dec 122013 Dec 15

Other

Other2013 6th IEEE Electrical Design of Advanced Packaging Systems Symposium, EDAPS 2013
CityNara
Period13/12/1213/12/15

    Fingerprint

Keywords

  • copper foil
  • high-speed signal transmission
  • signal loss
  • surface roughness

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Okubo, T., Sudo, T., Hosoi, T., Tsuyoshi, H., & Kuwako, F. (2013). Signal transmission loss on printed circuit board in GHz frequency region. In EDAPS 2013 - 2013 IEEE Electrical Design of Advanced Packaging Systems Symposium (pp. 112-115). [6724402] https://doi.org/10.1109/EDAPS.2013.6724402