Single pulsed-field magnetization on Gd-Ba-Cu-O Bulk HTS assembled for axial-gap type rotating machines

E. Morita; H. Matsuzaki; Y. Kimura; I. Ohtani; M. Izumi; Y. Nonaka; M. Murakami; T. Ida; H. Sugimoto; M. Miki; M. Kitano

doi:10.1088/1742-6596/43/1/194

Single pulsed-field magnetization on Gd-Ba-Cu-O Bulk HTS assembled for axial-gap type rotating machines

E. Morita, H. Matsuzaki, Y. Kimura, I. Ohtani, M. Izumi, Y. Nonaka, M. Murakami, T. Ida, H. Sugimoto, M. Miki, M. Kitano

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

We employed Gd-bulk HTS magnets as rotating poles for a smaller and lighter axial-gap type rotating machine. The bulk was placed between two vortex-type armature coils and cooled down to 77 K under zero-field. Pulsed current was applied to the vortex-type magnetizing coils. The trapped field distribution and transient flux behaviour strongly depend on the radial dimension of the armature vortex-type coil. In the present study, we show that there is an optimal radial dimension of magnetizing coils to the given bulk disk size to give a homogeneously conical distribution of the trapped flux.

Original language	English
Article number	194
Pages (from-to)	796-799
Number of pages	4
Journal	Journal of Physics: Conference Series
Volume	43
Issue number	1
DOIs	https://doi.org/10.1088/1742-6596/43/1/194
Publication status	Published - 2006 Jun 1

ASJC Scopus subject areas

Physics and Astronomy(all)

Access to Document

10.1088/1742-6596/43/1/194

Cite this

Single pulsed-field magnetization on Gd-Ba-Cu-O Bulk HTS assembled for axial-gap type rotating machines. / Morita, E.; Matsuzaki, H.; Kimura, Y.; Ohtani, I.; Izumi, M.; Nonaka, Y.; Murakami, M.; Ida, T.; Sugimoto, H.; Miki, M.; Kitano, M.

In: Journal of Physics: Conference Series, Vol. 43, No. 1, 194, 01.06.2006, p. 796-799.

Research output: Contribution to journal › Article › peer-review

@article{463791f0bc1345c796c8ac1347aa576e,

title = "Single pulsed-field magnetization on Gd-Ba-Cu-O Bulk HTS assembled for axial-gap type rotating machines",

abstract = "We employed Gd-bulk HTS magnets as rotating poles for a smaller and lighter axial-gap type rotating machine. The bulk was placed between two vortex-type armature coils and cooled down to 77 K under zero-field. Pulsed current was applied to the vortex-type magnetizing coils. The trapped field distribution and transient flux behaviour strongly depend on the radial dimension of the armature vortex-type coil. In the present study, we show that there is an optimal radial dimension of magnetizing coils to the given bulk disk size to give a homogeneously conical distribution of the trapped flux.",

author = "E. Morita and H. Matsuzaki and Y. Kimura and I. Ohtani and M. Izumi and Y. Nonaka and M. Murakami and T. Ida and H. Sugimoto and M. Miki and M. Kitano",

year = "2006",

month = jun,

day = "1",

doi = "10.1088/1742-6596/43/1/194",

language = "English",

volume = "43",

pages = "796--799",

journal = "Journal of Physics: Conference Series",

issn = "1742-6588",

publisher = "IOP Publishing Ltd.",

number = "1",

}

TY - JOUR

T1 - Single pulsed-field magnetization on Gd-Ba-Cu-O Bulk HTS assembled for axial-gap type rotating machines

AU - Morita, E.

AU - Matsuzaki, H.

AU - Kimura, Y.

AU - Ohtani, I.

AU - Izumi, M.

AU - Nonaka, Y.

AU - Murakami, M.

AU - Ida, T.

AU - Sugimoto, H.

AU - Miki, M.

AU - Kitano, M.

PY - 2006/6/1

Y1 - 2006/6/1

N2 - We employed Gd-bulk HTS magnets as rotating poles for a smaller and lighter axial-gap type rotating machine. The bulk was placed between two vortex-type armature coils and cooled down to 77 K under zero-field. Pulsed current was applied to the vortex-type magnetizing coils. The trapped field distribution and transient flux behaviour strongly depend on the radial dimension of the armature vortex-type coil. In the present study, we show that there is an optimal radial dimension of magnetizing coils to the given bulk disk size to give a homogeneously conical distribution of the trapped flux.

AB - We employed Gd-bulk HTS magnets as rotating poles for a smaller and lighter axial-gap type rotating machine. The bulk was placed between two vortex-type armature coils and cooled down to 77 K under zero-field. Pulsed current was applied to the vortex-type magnetizing coils. The trapped field distribution and transient flux behaviour strongly depend on the radial dimension of the armature vortex-type coil. In the present study, we show that there is an optimal radial dimension of magnetizing coils to the given bulk disk size to give a homogeneously conical distribution of the trapped flux.

UR - http://www.scopus.com/inward/record.url?scp=33746279615&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33746279615&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/43/1/194

DO - 10.1088/1742-6596/43/1/194

M3 - Article

AN - SCOPUS:33746279615

VL - 43

SP - 796

EP - 799

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - 1

M1 - 194

ER -

Single pulsed-field magnetization on Gd-Ba-Cu-O Bulk HTS assembled for axial-gap type rotating machines

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this