Abstract
Sintering of mixtures of high speed steel powder and boron containing ferrous alloy powders were studied to obtain carbide and boride precipitated wear resisting P/M alloys. The properties after heat treatment were examined. AISI M7 and carbon reduced M7 (0. 5 percent C) powders were selected and Fe-B and Fe-Cr-B powders were used as additive powders. Fe-B powder was better than Fe-Cr-B powder as the boron-containing additive powder. In order to get good mechanical properties, boron content of the mixture was determined as (Mo at percent plus W at percent)/B at percent equals 1. 0.
| Original language | English |
|---|---|
| Pages (from-to) | 118-124 |
| Number of pages | 7 |
| Journal | Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy |
| Volume | 35 |
| Issue number | 3 |
| Publication status | Published - 1988 Apr |
| Externally published | Yes |
Fingerprint
ASJC Scopus subject areas
- Mechanical Engineering
- Metals and Alloys
Cite this
SINTERING PHENOMENA AND HEAT-TREATED PROPERTIES OF CARBIDES AND BORIDES PRECIPITATED P/M ALLOYS MADE OF H. S. S. POWDER. / Fujiki, Akira; Maki, Yoshihiro; Kanou, Makoto; Tanimoto, Ichiro.
In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 35, No. 3, 04.1988, p. 118-124.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - SINTERING PHENOMENA AND HEAT-TREATED PROPERTIES OF CARBIDES AND BORIDES PRECIPITATED P/M ALLOYS MADE OF H. S. S. POWDER.
AU - Fujiki, Akira
AU - Maki, Yoshihiro
AU - Kanou, Makoto
AU - Tanimoto, Ichiro
PY - 1988/4
Y1 - 1988/4
N2 - Sintering of mixtures of high speed steel powder and boron containing ferrous alloy powders were studied to obtain carbide and boride precipitated wear resisting P/M alloys. The properties after heat treatment were examined. AISI M7 and carbon reduced M7 (0. 5 percent C) powders were selected and Fe-B and Fe-Cr-B powders were used as additive powders. Fe-B powder was better than Fe-Cr-B powder as the boron-containing additive powder. In order to get good mechanical properties, boron content of the mixture was determined as (Mo at percent plus W at percent)/B at percent equals 1. 0.
AB - Sintering of mixtures of high speed steel powder and boron containing ferrous alloy powders were studied to obtain carbide and boride precipitated wear resisting P/M alloys. The properties after heat treatment were examined. AISI M7 and carbon reduced M7 (0. 5 percent C) powders were selected and Fe-B and Fe-Cr-B powders were used as additive powders. Fe-B powder was better than Fe-Cr-B powder as the boron-containing additive powder. In order to get good mechanical properties, boron content of the mixture was determined as (Mo at percent plus W at percent)/B at percent equals 1. 0.
UR - http://www.scopus.com/inward/record.url?scp=0023995576&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0023995576&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:0023995576
VL - 35
SP - 118
EP - 124
JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
SN - 0532-8799
IS - 3
ER -