Solid state recycling from green wastes to aluminum alloys with high material efficiency

T. Aizawa, T. Luangvaranunt, K. Kondoh

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

All recyclable materials such as the used mechanical parts or home-housing members are melt, solidified and wrought to down-graded materials in the conventional recycling. Solid-state recycling is a promising approach to accept the mechanical chips and wastes generated in production as input and to yield the upgraded alloys and compounds as output. This new approach requires innovative processing to fabricate the targeting products via in-process refinement and control of microstructure as needed from the product design. In the present paper, the bulk mechanical alloying process is used for solid state recycling to make microstructure refinement from the mechanical chips to a dense powder compact. In experiment, Al-Si system is employed as a typical material for automotive parts, which must satisfy the requirement of fine Si-particulate size in the final product. Together with refinement experiment, the plastic power history imposed to a sample is continuously monitored during bulk mechanical alloying to be compared with the total energy consumption in the commercial production line from atomizing process to preliminary sintering. The number of cycles required to attain the largest Si-size demand of 7 μm was only 100, so that the energy consumption could be reduced from that needed by the conventional powder metallurgy process working in industry. The present method is robust in processing even when varying the morphology and Si concentration in the input materials.

Original languageEnglish
Pages (from-to)581-588
Number of pages8
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume65
Issue number7
Publication statusPublished - 2001
Externally publishedYes

Fingerprint

recycling
aluminum alloys
Recycling
Aluminum alloys
energy consumption
solid state
alloying
Mechanical alloying
products
chips
microstructure
Energy utilization
powder metallurgy
atomizing
particulates
Microstructure
sintering
Powder metallurgy
plastics
Processing

Keywords

  • Aluminum-silicon alloy
  • Bulk mechanical alloying
  • Energy consumption
  • In-process refinement
  • Silicon particle size
  • Solid-state recycling

ASJC Scopus subject areas

  • Metals and Alloys

Cite this

Solid state recycling from green wastes to aluminum alloys with high material efficiency. / Aizawa, T.; Luangvaranunt, T.; Kondoh, K.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 65, No. 7, 2001, p. 581-588.

Research output: Contribution to journalArticle

@article{fd297b5cf0664139b7e39e461d68a689,
title = "Solid state recycling from green wastes to aluminum alloys with high material efficiency",
abstract = "All recyclable materials such as the used mechanical parts or home-housing members are melt, solidified and wrought to down-graded materials in the conventional recycling. Solid-state recycling is a promising approach to accept the mechanical chips and wastes generated in production as input and to yield the upgraded alloys and compounds as output. This new approach requires innovative processing to fabricate the targeting products via in-process refinement and control of microstructure as needed from the product design. In the present paper, the bulk mechanical alloying process is used for solid state recycling to make microstructure refinement from the mechanical chips to a dense powder compact. In experiment, Al-Si system is employed as a typical material for automotive parts, which must satisfy the requirement of fine Si-particulate size in the final product. Together with refinement experiment, the plastic power history imposed to a sample is continuously monitored during bulk mechanical alloying to be compared with the total energy consumption in the commercial production line from atomizing process to preliminary sintering. The number of cycles required to attain the largest Si-size demand of 7 μm was only 100, so that the energy consumption could be reduced from that needed by the conventional powder metallurgy process working in industry. The present method is robust in processing even when varying the morphology and Si concentration in the input materials.",
keywords = "Aluminum-silicon alloy, Bulk mechanical alloying, Energy consumption, In-process refinement, Silicon particle size, Solid-state recycling",
author = "T. Aizawa and T. Luangvaranunt and K. Kondoh",
year = "2001",
language = "English",
volume = "65",
pages = "581--588",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "Japan Institute of Metals (JIM)",
number = "7",

}

TY - JOUR

T1 - Solid state recycling from green wastes to aluminum alloys with high material efficiency

AU - Aizawa, T.

AU - Luangvaranunt, T.

AU - Kondoh, K.

PY - 2001

Y1 - 2001

N2 - All recyclable materials such as the used mechanical parts or home-housing members are melt, solidified and wrought to down-graded materials in the conventional recycling. Solid-state recycling is a promising approach to accept the mechanical chips and wastes generated in production as input and to yield the upgraded alloys and compounds as output. This new approach requires innovative processing to fabricate the targeting products via in-process refinement and control of microstructure as needed from the product design. In the present paper, the bulk mechanical alloying process is used for solid state recycling to make microstructure refinement from the mechanical chips to a dense powder compact. In experiment, Al-Si system is employed as a typical material for automotive parts, which must satisfy the requirement of fine Si-particulate size in the final product. Together with refinement experiment, the plastic power history imposed to a sample is continuously monitored during bulk mechanical alloying to be compared with the total energy consumption in the commercial production line from atomizing process to preliminary sintering. The number of cycles required to attain the largest Si-size demand of 7 μm was only 100, so that the energy consumption could be reduced from that needed by the conventional powder metallurgy process working in industry. The present method is robust in processing even when varying the morphology and Si concentration in the input materials.

AB - All recyclable materials such as the used mechanical parts or home-housing members are melt, solidified and wrought to down-graded materials in the conventional recycling. Solid-state recycling is a promising approach to accept the mechanical chips and wastes generated in production as input and to yield the upgraded alloys and compounds as output. This new approach requires innovative processing to fabricate the targeting products via in-process refinement and control of microstructure as needed from the product design. In the present paper, the bulk mechanical alloying process is used for solid state recycling to make microstructure refinement from the mechanical chips to a dense powder compact. In experiment, Al-Si system is employed as a typical material for automotive parts, which must satisfy the requirement of fine Si-particulate size in the final product. Together with refinement experiment, the plastic power history imposed to a sample is continuously monitored during bulk mechanical alloying to be compared with the total energy consumption in the commercial production line from atomizing process to preliminary sintering. The number of cycles required to attain the largest Si-size demand of 7 μm was only 100, so that the energy consumption could be reduced from that needed by the conventional powder metallurgy process working in industry. The present method is robust in processing even when varying the morphology and Si concentration in the input materials.

KW - Aluminum-silicon alloy

KW - Bulk mechanical alloying

KW - Energy consumption

KW - In-process refinement

KW - Silicon particle size

KW - Solid-state recycling

UR - http://www.scopus.com/inward/record.url?scp=0034836534&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034836534&partnerID=8YFLogxK

M3 - Article

VL - 65

SP - 581

EP - 588

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 7

ER -