Solid state recycling of recyclable aluminum wastes with in-process microstructure control

Tatsuhiko Aizawa, Tachai Luangvaranunt, Katsuyoshi Kondoh

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

Aiming for actual dematerialization, mass flow must be optimized to make full use of the recyclable materials as input and to reduce total amount of wastes. Since the material efficiency is strongly dependent on their adaptivity to the design demand for recycled products, an effective recycling process must accompany the advanced materials processing and manufacturing to improve their original properties to the level above the demand. In the present paper, the light-mass non-ferrous metallic alloys such as aluminum alloys are targeted, to utilize their bulk wastes, which are often ejected from the electric parts or members, as an input material, and to aim for their reuse as an automotive part. Dense, high-strengthened aluminum alloy compact, or, green materials are handled in the present forming and manufacturing up to the final net-shape formation of products by sinter-forging. Selection of reused materials and in-process improvement of their properties are essential keys in this barrier-free processing. Possibility to replace the conventional processing with this barrier-free process lies in: (1) Reduction of in-process energy and mass consumption, (2) Flexibility to yield various kinds of products without any realignment of processes, and (3) Adaptive in-process material modification to design for products in practical use.

Original languageEnglish
Pages (from-to)315-321
Number of pages7
JournalMaterials Transactions
Volume43
Issue number3
Publication statusPublished - 2002 Mar
Externally publishedYes

Fingerprint

recycling
Aluminum
Recycling
solid state
aluminum
microstructure
Microstructure
products
aluminum alloys
manufacturing
forging
reuse
mass flow
energy consumption
Aluminum alloys
Processing
flexibility
Forging

Keywords

  • Aluminum silicon alloy
  • Bulk mechanical alloying
  • Green state forming
  • In-process microstructure control
  • Iron contaminants
  • Low energy consumption
  • Solid state recycling

ASJC Scopus subject areas

  • Materials Science(all)
  • Metals and Alloys

Cite this

Solid state recycling of recyclable aluminum wastes with in-process microstructure control. / Aizawa, Tatsuhiko; Luangvaranunt, Tachai; Kondoh, Katsuyoshi.

In: Materials Transactions, Vol. 43, No. 3, 03.2002, p. 315-321.

Research output: Contribution to journalArticle

Aizawa, T, Luangvaranunt, T & Kondoh, K 2002, 'Solid state recycling of recyclable aluminum wastes with in-process microstructure control', Materials Transactions, vol. 43, no. 3, pp. 315-321.
Aizawa, Tatsuhiko ; Luangvaranunt, Tachai ; Kondoh, Katsuyoshi. / Solid state recycling of recyclable aluminum wastes with in-process microstructure control. In: Materials Transactions. 2002 ; Vol. 43, No. 3. pp. 315-321.
@article{8abe132c642c4964bb37526c410f7a70,
title = "Solid state recycling of recyclable aluminum wastes with in-process microstructure control",
abstract = "Aiming for actual dematerialization, mass flow must be optimized to make full use of the recyclable materials as input and to reduce total amount of wastes. Since the material efficiency is strongly dependent on their adaptivity to the design demand for recycled products, an effective recycling process must accompany the advanced materials processing and manufacturing to improve their original properties to the level above the demand. In the present paper, the light-mass non-ferrous metallic alloys such as aluminum alloys are targeted, to utilize their bulk wastes, which are often ejected from the electric parts or members, as an input material, and to aim for their reuse as an automotive part. Dense, high-strengthened aluminum alloy compact, or, green materials are handled in the present forming and manufacturing up to the final net-shape formation of products by sinter-forging. Selection of reused materials and in-process improvement of their properties are essential keys in this barrier-free processing. Possibility to replace the conventional processing with this barrier-free process lies in: (1) Reduction of in-process energy and mass consumption, (2) Flexibility to yield various kinds of products without any realignment of processes, and (3) Adaptive in-process material modification to design for products in practical use.",
keywords = "Aluminum silicon alloy, Bulk mechanical alloying, Green state forming, In-process microstructure control, Iron contaminants, Low energy consumption, Solid state recycling",
author = "Tatsuhiko Aizawa and Tachai Luangvaranunt and Katsuyoshi Kondoh",
year = "2002",
month = "3",
language = "English",
volume = "43",
pages = "315--321",
journal = "Materials Transactions",
issn = "1345-9678",
publisher = "Japan Institute of Metals (JIM)",
number = "3",

}

TY - JOUR

T1 - Solid state recycling of recyclable aluminum wastes with in-process microstructure control

AU - Aizawa, Tatsuhiko

AU - Luangvaranunt, Tachai

AU - Kondoh, Katsuyoshi

PY - 2002/3

Y1 - 2002/3

N2 - Aiming for actual dematerialization, mass flow must be optimized to make full use of the recyclable materials as input and to reduce total amount of wastes. Since the material efficiency is strongly dependent on their adaptivity to the design demand for recycled products, an effective recycling process must accompany the advanced materials processing and manufacturing to improve their original properties to the level above the demand. In the present paper, the light-mass non-ferrous metallic alloys such as aluminum alloys are targeted, to utilize their bulk wastes, which are often ejected from the electric parts or members, as an input material, and to aim for their reuse as an automotive part. Dense, high-strengthened aluminum alloy compact, or, green materials are handled in the present forming and manufacturing up to the final net-shape formation of products by sinter-forging. Selection of reused materials and in-process improvement of their properties are essential keys in this barrier-free processing. Possibility to replace the conventional processing with this barrier-free process lies in: (1) Reduction of in-process energy and mass consumption, (2) Flexibility to yield various kinds of products without any realignment of processes, and (3) Adaptive in-process material modification to design for products in practical use.

AB - Aiming for actual dematerialization, mass flow must be optimized to make full use of the recyclable materials as input and to reduce total amount of wastes. Since the material efficiency is strongly dependent on their adaptivity to the design demand for recycled products, an effective recycling process must accompany the advanced materials processing and manufacturing to improve their original properties to the level above the demand. In the present paper, the light-mass non-ferrous metallic alloys such as aluminum alloys are targeted, to utilize their bulk wastes, which are often ejected from the electric parts or members, as an input material, and to aim for their reuse as an automotive part. Dense, high-strengthened aluminum alloy compact, or, green materials are handled in the present forming and manufacturing up to the final net-shape formation of products by sinter-forging. Selection of reused materials and in-process improvement of their properties are essential keys in this barrier-free processing. Possibility to replace the conventional processing with this barrier-free process lies in: (1) Reduction of in-process energy and mass consumption, (2) Flexibility to yield various kinds of products without any realignment of processes, and (3) Adaptive in-process material modification to design for products in practical use.

KW - Aluminum silicon alloy

KW - Bulk mechanical alloying

KW - Green state forming

KW - In-process microstructure control

KW - Iron contaminants

KW - Low energy consumption

KW - Solid state recycling

UR - http://www.scopus.com/inward/record.url?scp=0036505979&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036505979&partnerID=8YFLogxK

M3 - Article

VL - 43

SP - 315

EP - 321

JO - Materials Transactions

JF - Materials Transactions

SN - 1345-9678

IS - 3

ER -