Spatial filter design for observation spillover suppression (fundamental investigation in vibration testing)

Naoki Hosoya, Yuichi Matsumura

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Spatial filter whose importance has been recognized is useful for suppressing modal observation spillover and making reduced-order model of the structures. The authors have proposed a design method of spatial filter of structures. The method is able to get rid of the selected modal amplitudes from measured responses in vibration testing. A small number of sensors are used to design spatial filter that are below number of the modes in target frequency range. In this paper FE-model based filtering methodology is presented. The following is the filter design procedure : a fundamental spatial filter is designed from FE-model of the structure, its experimental model is identified by using experimental modal analysis, and finally, spatial filter corrected by the experimental model is obtained. This paper installs the evaluation of optimal sensor position for establishing spatial filter. The workability of the method is investigated by experimental application to a cantilever beam.

Original languageEnglish
Pages (from-to)2478-2484
Number of pages7
JournalNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume72
Issue number8
Publication statusPublished - 2006 Aug
Externally publishedYes

Fingerprint

Testing
Sensors
Cantilever beams
Modal analysis

Keywords

  • Experimental modal analysis
  • Filter
  • Frequency response function
  • Impact testing
  • Observability

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

@article{b6218babedbd4d78956cf6554f78d115,
title = "Spatial filter design for observation spillover suppression (fundamental investigation in vibration testing)",
abstract = "Spatial filter whose importance has been recognized is useful for suppressing modal observation spillover and making reduced-order model of the structures. The authors have proposed a design method of spatial filter of structures. The method is able to get rid of the selected modal amplitudes from measured responses in vibration testing. A small number of sensors are used to design spatial filter that are below number of the modes in target frequency range. In this paper FE-model based filtering methodology is presented. The following is the filter design procedure : a fundamental spatial filter is designed from FE-model of the structure, its experimental model is identified by using experimental modal analysis, and finally, spatial filter corrected by the experimental model is obtained. This paper installs the evaluation of optimal sensor position for establishing spatial filter. The workability of the method is investigated by experimental application to a cantilever beam.",
keywords = "Experimental modal analysis, Filter, Frequency response function, Impact testing, Observability",
author = "Naoki Hosoya and Yuichi Matsumura",
year = "2006",
month = "8",
language = "English",
volume = "72",
pages = "2478--2484",
journal = "Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",
issn = "0387-5024",
publisher = "Japan Society of Mechanical Engineers",
number = "8",

}

TY - JOUR

T1 - Spatial filter design for observation spillover suppression (fundamental investigation in vibration testing)

AU - Hosoya, Naoki

AU - Matsumura, Yuichi

PY - 2006/8

Y1 - 2006/8

N2 - Spatial filter whose importance has been recognized is useful for suppressing modal observation spillover and making reduced-order model of the structures. The authors have proposed a design method of spatial filter of structures. The method is able to get rid of the selected modal amplitudes from measured responses in vibration testing. A small number of sensors are used to design spatial filter that are below number of the modes in target frequency range. In this paper FE-model based filtering methodology is presented. The following is the filter design procedure : a fundamental spatial filter is designed from FE-model of the structure, its experimental model is identified by using experimental modal analysis, and finally, spatial filter corrected by the experimental model is obtained. This paper installs the evaluation of optimal sensor position for establishing spatial filter. The workability of the method is investigated by experimental application to a cantilever beam.

AB - Spatial filter whose importance has been recognized is useful for suppressing modal observation spillover and making reduced-order model of the structures. The authors have proposed a design method of spatial filter of structures. The method is able to get rid of the selected modal amplitudes from measured responses in vibration testing. A small number of sensors are used to design spatial filter that are below number of the modes in target frequency range. In this paper FE-model based filtering methodology is presented. The following is the filter design procedure : a fundamental spatial filter is designed from FE-model of the structure, its experimental model is identified by using experimental modal analysis, and finally, spatial filter corrected by the experimental model is obtained. This paper installs the evaluation of optimal sensor position for establishing spatial filter. The workability of the method is investigated by experimental application to a cantilever beam.

KW - Experimental modal analysis

KW - Filter

KW - Frequency response function

KW - Impact testing

KW - Observability

UR - http://www.scopus.com/inward/record.url?scp=33750688532&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33750688532&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:33750688532

VL - 72

SP - 2478

EP - 2484

JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

SN - 0387-5024

IS - 8

ER -