Abstract
In the same sintering and heat-treated conditions, the effects of partially alloyed and prealloyed powders with the different contents of alloying elements and compacting pressure on the Young's modulus (E) and Poisson's ratio (v) of sintered low alloy steels were investigated. The values of E and v depended mainly on the porosity (P) controlled by compacting pressure, and those values were affected slightly by the alloy powder types. The relations of P to E and v were described as the following equations: E = E0 (1-kE · P) 2 and v = 0.034 (1-kv · P)2 + 0.267, where E0 was the value of E at P = 0, and kE and kv were experimental constants that depends on the alloy powder types and sintering temperature.
Original language | English |
---|---|
Pages (from-to) | 228-132 |
Number of pages | 97 |
Journal | Fenmo Yejin Jishu/Powder Metallurgy Technology |
Volume | 25 |
Issue number | 3 |
Publication status | Published - 2007 Jun |
Externally published | Yes |
Fingerprint
Keywords
- Compacting pressure
- Partially and prealloyed powders
- Poisson's ratio
- Porosity
- Young's modulus
ASJC Scopus subject areas
- Mechanical Engineering
- Metals and Alloys
Cite this
The effects of powder type and compacting pressure on the Young's modulus and Poisson's ratio of sintered low alloy steels. / Hirose, Norimitus; Asami, Junichi; Fujiki, Akira; Oouchi, Kazuya.
In: Fenmo Yejin Jishu/Powder Metallurgy Technology, Vol. 25, No. 3, 06.2007, p. 228-132.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - The effects of powder type and compacting pressure on the Young's modulus and Poisson's ratio of sintered low alloy steels
AU - Hirose, Norimitus
AU - Asami, Junichi
AU - Fujiki, Akira
AU - Oouchi, Kazuya
PY - 2007/6
Y1 - 2007/6
N2 - In the same sintering and heat-treated conditions, the effects of partially alloyed and prealloyed powders with the different contents of alloying elements and compacting pressure on the Young's modulus (E) and Poisson's ratio (v) of sintered low alloy steels were investigated. The values of E and v depended mainly on the porosity (P) controlled by compacting pressure, and those values were affected slightly by the alloy powder types. The relations of P to E and v were described as the following equations: E = E0 (1-kE · P) 2 and v = 0.034 (1-kv · P)2 + 0.267, where E0 was the value of E at P = 0, and kE and kv were experimental constants that depends on the alloy powder types and sintering temperature.
AB - In the same sintering and heat-treated conditions, the effects of partially alloyed and prealloyed powders with the different contents of alloying elements and compacting pressure on the Young's modulus (E) and Poisson's ratio (v) of sintered low alloy steels were investigated. The values of E and v depended mainly on the porosity (P) controlled by compacting pressure, and those values were affected slightly by the alloy powder types. The relations of P to E and v were described as the following equations: E = E0 (1-kE · P) 2 and v = 0.034 (1-kv · P)2 + 0.267, where E0 was the value of E at P = 0, and kE and kv were experimental constants that depends on the alloy powder types and sintering temperature.
KW - Compacting pressure
KW - Partially and prealloyed powders
KW - Poisson's ratio
KW - Porosity
KW - Young's modulus
UR - http://www.scopus.com/inward/record.url?scp=34547361290&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=34547361290&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:34547361290
VL - 25
SP - 228
EP - 132
JO - Fenmo Yejin Jishu/Powder Metallurgy Technology
JF - Fenmo Yejin Jishu/Powder Metallurgy Technology
SN - 1001-3784
IS - 3
ER -