Thin-film glucose biosensor based on plasma-polymerized film: Simple design for mass production

Hitoshi Muguruma, Atsunori Hiratsuka, Isao Karube

Research output: Contribution to journalArticle

96 Citations (Scopus)

Abstract

We propose a simple thin-film glucose biosensor based on a plasma- polymerized film. The film is deposited directly onto the substrate under dry conditions. The resulting films are extreme thin, adhere well onto the substrate (electrode), and have a highly cross-linked network structure and functional groups, such as amino groups, which enable a large amount of enzyme to be immobilized. Since this design allows fabrication through a dry process, with the exception of the enzyme immobilization, which is the last stage of the process, the chip fabrication can be designed as a full-wafer process to achieve mass production compatibility. The resulting sensors produced using this film are more reproducible, exhibit lower noise, and reduce the effect of interference to a greater degree than sensors made using conventional immobilization methods, e.g., via 3- (aminopropyl)triethoxysilane. The obtained film is a good interfacial design between enzyme and electrode; enzyme two-dimensionally locates very close to the electrode in a manner that is quite reproducible. Therefore, a wide dynamic range (up to 60 mM) and rapid response time (11.5 ± 0.8 s) were obtained. Because of its highly cross-linking network structure, the amperometric response due to interferences such as ascorbic acid and acetaminophen was reduced by size discrimination of plasma-polymerized films.

Original languageEnglish
Pages (from-to)2671-2675
Number of pages5
JournalAnalytical Chemistry
Volume72
Issue number11
DOIs
Publication statusPublished - 2000 Jun 1
Externally publishedYes

Fingerprint

Biosensors
Plasmas
Glucose
Thin films
Electrodes
Enzymes
Enzyme immobilization
Fabrication
Sensors
Substrates
Acetaminophen
Functional groups
Ascorbic Acid

ASJC Scopus subject areas

  • Analytical Chemistry

Cite this

Thin-film glucose biosensor based on plasma-polymerized film : Simple design for mass production. / Muguruma, Hitoshi; Hiratsuka, Atsunori; Karube, Isao.

In: Analytical Chemistry, Vol. 72, No. 11, 01.06.2000, p. 2671-2675.

Research output: Contribution to journalArticle

@article{8e6b226af97e4a0c8dc9df84d57cdc8d,
title = "Thin-film glucose biosensor based on plasma-polymerized film: Simple design for mass production",
abstract = "We propose a simple thin-film glucose biosensor based on a plasma- polymerized film. The film is deposited directly onto the substrate under dry conditions. The resulting films are extreme thin, adhere well onto the substrate (electrode), and have a highly cross-linked network structure and functional groups, such as amino groups, which enable a large amount of enzyme to be immobilized. Since this design allows fabrication through a dry process, with the exception of the enzyme immobilization, which is the last stage of the process, the chip fabrication can be designed as a full-wafer process to achieve mass production compatibility. The resulting sensors produced using this film are more reproducible, exhibit lower noise, and reduce the effect of interference to a greater degree than sensors made using conventional immobilization methods, e.g., via 3- (aminopropyl)triethoxysilane. The obtained film is a good interfacial design between enzyme and electrode; enzyme two-dimensionally locates very close to the electrode in a manner that is quite reproducible. Therefore, a wide dynamic range (up to 60 mM) and rapid response time (11.5 ± 0.8 s) were obtained. Because of its highly cross-linking network structure, the amperometric response due to interferences such as ascorbic acid and acetaminophen was reduced by size discrimination of plasma-polymerized films.",
author = "Hitoshi Muguruma and Atsunori Hiratsuka and Isao Karube",
year = "2000",
month = "6",
day = "1",
doi = "10.1021/ac000014n",
language = "English",
volume = "72",
pages = "2671--2675",
journal = "Analytical Chemistry",
issn = "0003-2700",
publisher = "American Chemical Society",
number = "11",

}

TY - JOUR

T1 - Thin-film glucose biosensor based on plasma-polymerized film

T2 - Simple design for mass production

AU - Muguruma, Hitoshi

AU - Hiratsuka, Atsunori

AU - Karube, Isao

PY - 2000/6/1

Y1 - 2000/6/1

N2 - We propose a simple thin-film glucose biosensor based on a plasma- polymerized film. The film is deposited directly onto the substrate under dry conditions. The resulting films are extreme thin, adhere well onto the substrate (electrode), and have a highly cross-linked network structure and functional groups, such as amino groups, which enable a large amount of enzyme to be immobilized. Since this design allows fabrication through a dry process, with the exception of the enzyme immobilization, which is the last stage of the process, the chip fabrication can be designed as a full-wafer process to achieve mass production compatibility. The resulting sensors produced using this film are more reproducible, exhibit lower noise, and reduce the effect of interference to a greater degree than sensors made using conventional immobilization methods, e.g., via 3- (aminopropyl)triethoxysilane. The obtained film is a good interfacial design between enzyme and electrode; enzyme two-dimensionally locates very close to the electrode in a manner that is quite reproducible. Therefore, a wide dynamic range (up to 60 mM) and rapid response time (11.5 ± 0.8 s) were obtained. Because of its highly cross-linking network structure, the amperometric response due to interferences such as ascorbic acid and acetaminophen was reduced by size discrimination of plasma-polymerized films.

AB - We propose a simple thin-film glucose biosensor based on a plasma- polymerized film. The film is deposited directly onto the substrate under dry conditions. The resulting films are extreme thin, adhere well onto the substrate (electrode), and have a highly cross-linked network structure and functional groups, such as amino groups, which enable a large amount of enzyme to be immobilized. Since this design allows fabrication through a dry process, with the exception of the enzyme immobilization, which is the last stage of the process, the chip fabrication can be designed as a full-wafer process to achieve mass production compatibility. The resulting sensors produced using this film are more reproducible, exhibit lower noise, and reduce the effect of interference to a greater degree than sensors made using conventional immobilization methods, e.g., via 3- (aminopropyl)triethoxysilane. The obtained film is a good interfacial design between enzyme and electrode; enzyme two-dimensionally locates very close to the electrode in a manner that is quite reproducible. Therefore, a wide dynamic range (up to 60 mM) and rapid response time (11.5 ± 0.8 s) were obtained. Because of its highly cross-linking network structure, the amperometric response due to interferences such as ascorbic acid and acetaminophen was reduced by size discrimination of plasma-polymerized films.

UR - http://www.scopus.com/inward/record.url?scp=0034213401&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034213401&partnerID=8YFLogxK

U2 - 10.1021/ac000014n

DO - 10.1021/ac000014n

M3 - Article

C2 - 10857654

AN - SCOPUS:0034213401

VL - 72

SP - 2671

EP - 2675

JO - Analytical Chemistry

JF - Analytical Chemistry

SN - 0003-2700

IS - 11

ER -