Three-dimensional triangulation for forging and solidification designs

Tatsuhiko Aizawa, Junji Kihara

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Three-dimensional modeling for plastic forming and solidification analyses is indispensable not only for forging and casting design/redesign but also for coupled problem with flow and deformation analyses. The direct tessellation method has been proposed and developed to provide tetrahedral element modeling automatically for the prescribed geometric model. Our developing algorithm is described with comments on its essential features. Through some numerical examples in generating three-dimensional modelings, several issues of automatic model generation and control are discussed on the basis of quantitative evaluation of these above features.

Original languageEnglish
Title of host publicationConcurrent Engineering - 1992
PublisherPubl by ASME
Pages1-16
Number of pages16
ISBN (Print)0791810909
Publication statusPublished - 1992 Dec 1
EventWinter Annual Meeting of the American Society of Mechanical Engineers - Anaheim, CA, USA
Duration: 1992 Nov 81992 Nov 13

Publication series

NameAmerican Society of Mechanical Engineers, Production Engineering Division (Publication) PED
Volume59

Other

OtherWinter Annual Meeting of the American Society of Mechanical Engineers
CityAnaheim, CA, USA
Period92/11/892/11/13

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Three-dimensional triangulation for forging and solidification designs'. Together they form a unique fingerprint.

  • Cite this

    Aizawa, T., & Kihara, J. (1992). Three-dimensional triangulation for forging and solidification designs. In Concurrent Engineering - 1992 (pp. 1-16). (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; Vol. 59). Publ by ASME.