デザイン工学部

研究成果

フィルター
Conference contribution

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 1 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (版). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; 巻数 656-657).

研究成果: Conference contribution

1 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014 1 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (版). Trans Tech Publications Ltd, p. 267-272 6 p. (Advanced Materials Research; 巻数 1017).

研究成果: Conference contribution

1 引用 (Scopus)

Evaluation of machining accuracy by measurement of surface texture pattern

Tozawa, K., Toida, N., Kobayashi, Y. & Shirai, K., 2005 12 1, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

研究成果: Conference contribution

2 引用 (Scopus)

Eye gaze estimation based on ellipse fitting and three-dimensional model of eye for 'Intelligent Poster'

Urano, R., Suzuki, R. & Sasaki, T., 2014 1 1, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 1157-1162 6 p. 6878237. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

4 引用 (Scopus)

Failure-atomic synchronization of memory mapped data in non-volatile memory based system

Haga, K. & Yamazaki, K., 2018 3 1, Proceedings - 12th SEATUC Symposium, SEATUC 2018. Institute of Electrical and Electronics Engineers Inc., 8788878. (Proceedings - 12th SEATUC Symposium, SEATUC 2018).

研究成果: Conference contribution

Generation of multi-level disparity map from stereo wide angle fovea vision system

Kameyama, N., Tominaga, M., Kawasaki, N., Shimizu, S., Shimomura, O., Ishimaru, K., Murakami, R., Akamine, Y. & Mita, S., 2018 12 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5451-5456 6 p. 8591128. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

研究成果: Conference contribution

1 引用 (Scopus)

Handwritten Cube Recognition and Evaluation Based on Perspectives for Sketch Training System

Kuribayashi, Y., Yamaga, E. & Sasaki, T., 2019 4 25, Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019. Institute of Electrical and Electronics Engineers Inc., p. 34-39 6 p. 8700369. (Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019).

研究成果: Conference contribution

1 引用 (Scopus)

Hierarchical framework for implementation of intelligent space

Sasaki, T. & Hashimoto, H., 2007, Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society, IECON. p. 28-33 6 p. 4460179. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

5 引用 (Scopus)

High speed machining: A review from a viewpoint of chip formation

Obikawa, T., Anzai, M., Egawa, T., Narutaki, N., Shintani, K. & Takeoka, E., 2011, High Speed Machining. p. 578-583 6 p. (Advanced Materials Research; 巻数 188).

研究成果: Conference contribution

9 引用 (Scopus)

Human observation based mobile robot navigation in intelligent space

Sasaki, T. & Hashimoto, H., 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2006. p. 1044-1049 6 p. 4058502. (IEEE International Conference on Intelligent Robots and Systems).

研究成果: Conference contribution

19 引用 (Scopus)

Humanoid climbing robot modeling in matlab-simechanics

Dung, N. A. & Shimada, A., 2013 12 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4162-4167 6 p. 6699803. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

4 引用 (Scopus)

Implementation of distributed sensor network for intelligent space

Sasaki, T., Brscic, D. & Hashimoto, H., 2007, Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007. 4280003. (Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007).

研究成果: Conference contribution

4 引用 (Scopus)

Implementation of mobile robot control in intelligent space

Brscic, D., Sasaki, T. & Hashimoto, H., 2006, 2006 SICE-ICASE International Joint Conference. p. 1228-1233 6 p. 4109151. (2006 SICE-ICASE International Joint Conference).

研究成果: Conference contribution

15 引用 (Scopus)

IoT-security approach analysis for the novel nutrition-based vegetable production and distribution system

Dennis, A. L. R., Ahrary, A., Horibe, N. & Yang, W. S., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 185-189 5 p. 6913291. (Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014).

研究成果: Conference contribution

4 引用 (Scopus)

Joint workshop of the 5th International Workshop on Model-Driven Approaches in Software Product Line Engineering and the 4th Workshop on Scalable Modeling Techniques for Software Product Lines (MAPLE/SCALE 2013)

Botterweck, G., Dhungana, D., Noda, N., Rabiser, R. & Washizaki, H., 2013 9 18, Proceedings of the 17th International Software Product Line Conference, SPLC 2013. 1 p. (ACM International Conference Proceeding Series).

研究成果: Conference contribution

Large area micro-texture imprinting onto metallic sheet via CNC stamping

Aizawa, T., Tamaki, M. & Fukuda, T., 2014, 11th International Conference on Technology of Plasticity, ICTP 2014. Elsevier Ltd, 巻 81. p. 1427-1432 6 p.

研究成果: Conference contribution

5 引用 (Scopus)

Machine vision system to induct binocular wide-angle foveated information into both the human and computers - Feature generation algorithm based on DFT for binocular fixation

Shimizu, S., Shimojo, S., Hao, J. & Burdick, J. W., 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation. p. 793-799 7 p. 1570214. (Proceedings - IEEE International Conference on Robotics and Automation; 巻数 2005).

研究成果: Conference contribution

4 引用 (Scopus)

Micro-texturing onto amorphous carbon materials as a mold-die for micro-forming

Aizawa, T., 2013 3 11, Micro Manufacturing Techniques and Applications. p. 23-37 15 p. (Applied Mechanics and Materials; 巻数 289).

研究成果: Conference contribution

9 引用 (Scopus)

Modeling and position control of mobile robot

Padhy, P. K., Sasaki, T., Nakamura, S. & Hashimoto, H., 2010, AMC2010 - The 11th IEEE International Workshop on Advanced Motion Control, Proceedings. p. 100-105 6 p. 5464018. (International Workshop on Advanced Motion Control, AMC).

研究成果: Conference contribution

22 引用 (Scopus)

Motion-controlled precise stamping for microtexturing onto aluminum sheet

Aizawa, T., Itoh, T., Tamaki, M. & Fukuda, T., 2014 1 1, Metal Forming 2014. Micari, F. & Fratini, L. (版). Trans Tech Publications Ltd, p. 64-71 8 p. (Key Engineering Materials; 巻数 622-623).

研究成果: Conference contribution

Multi-rate discrete control for omni-directional robot in intelligent space

Phaoharuhansa, D. & Shimada, A., 2014 10 23, Proceedings of the SICE Annual Conference. Society of Instrument and Control Engineers (SICE), p. 1867-1873 7 p. 6935307. (Proceedings of the SICE Annual Conference).

研究成果: Conference contribution

Non-verbal communication-based emotion incitation robot

Shimizu, S., Shimada, K. & Murakami, R., 2018 6 1, Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 338-341 4 p. (Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018).

研究成果: Conference contribution

Operation sound influence on tablet device character input operation

Yang, W., Kondo, H. & Seok, W. M., 2015, Communications in Computer and Information Science. Springer Verlag, 巻 529. p. 51-56 6 p. (Communications in Computer and Information Science; 巻数 529).

研究成果: Conference contribution

1 引用 (Scopus)

Parallelization of recursive preorder traversal based on building and winding call stacks

Nakayama, M., Yamazaki, K. & Tanaka, S., 2016 8 2, Proceedings - 2016 IEEE 30th International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2016. IEEE Computer Society, 巻 2016-August. p. 570-579 10 p. 7529916

研究成果: Conference contribution

Parallelization of tree-to-TLV serialization

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2015 1 20, 2014 IEEE 33rd International Performance Computing and Communications Conference, IPCCC 2014. Institute of Electrical and Electronics Engineers Inc., 巻 2014-January. 7017059

研究成果: Conference contribution

1 引用 (Scopus)

Phase shift pulse Brillouin optical time domain analysis (PSP-BOTDA) employing Dual Golay Codes

Bin Zan, M. S. D., Sasaki, T., Horiguchi, T. & Uchiyama, D., 2010 10 15, International Conference on Computer and Communication Engineering, ICCCE'10. 5556827. (International Conference on Computer and Communication Engineering, ICCCE'10).

研究成果: Conference contribution

2 引用 (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 8 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (版). EDP Sciences, 09002. (MATEC Web of Conferences; 巻数 21).

研究成果: Conference contribution

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 1 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (版). Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

Position estimation based on the target shape information using laser range finders for Intelligent Space

Sasaki, T., Tamura, H., Hashimoto, H. & Inoue, F., 2010, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2010. p. 605-610 6 p. 5695943. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

1 引用 (Scopus)

Position measurement of piles using a laser range finder for accurate and efficient pile driving

Sasaki, T., Huang, X., Hashimoto, H. & Inoue, F., 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2011. p. 241-246 6 p. 6027128. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

3 引用 (Scopus)

Position measurement system for cylindrical objects using laser range finder

Tamura, H., Sasaki, T., Hashimoto, H. & Inoue, F., 2010, Proceedings of SICE Annual Conference 2010, SICE 2010 - Final Program and Papers. Society of Instrument and Control Engineers (SICE), p. 291-296 6 p. 5602017. (Proceedings of the SICE Annual Conference).

研究成果: Conference contribution

5 引用 (Scopus)

Potentials of Galilean and Keplerian Liquid Crystal Zoom Lens System

Shimizu, S., Hirai, H., Kawamura, M. & Sato, S., 2018 10 17, Proceedings - 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, Mecatronics 2018. Institute of Electrical and Electronics Engineers Inc., p. 308-311 4 p. 8495813

研究成果: Conference contribution

1 引用 (Scopus)

Power saving mechanism based on simple moving average for 802.3ad link aggregation

Imaizumi, H., Nagata, T., Kunito, G., Yamazaki, K. & Morikawa, H., 2009, 2009 IEEE Globecom Workshops, Gc Workshops 2009. 5360735. (2009 IEEE Globecom Workshops, Gc Workshops 2009).

研究成果: Conference contribution

19 引用 (Scopus)

Power saving technique based on simple moving average for multi-channel Ethernet

Imaizumi, H., Nagata, T., Kunito, G., Yamazaki, K. & Morikawa, H., 2009, 2009 14th OptoElectronics and Communications Conference, OECC 2009. 5213197. (2009 14th OptoElectronics and Communications Conference, OECC 2009).

研究成果: Conference contribution

3 引用 (Scopus)

Reimagining braga

Agirachman, F. A., Ozawa, Y., Indraprastha, A., Shinozaki, M., Sitompul, I. D. M., Nuraeni, R., Chirstanti, A. N., Putra, A. C. & Zefanya, T., 2017 1 1, CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches. Schnabel, M. A., Raonic, A., Janssen, P. & Loh, P. (版). The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), p. 23-32 10 p. (CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches).

研究成果: Conference contribution

Research for relief of discomfort of sound user interface (sui)

Yang, W., 2018 1 1, 15th International Design Conference, DESIGN 2018. Storga, M., Pavkovic, N., Bojcetic, N., Skec, S. & Marjanovic, D. (版). Faculty of Mechanical Engineering and Naval Architecture, 巻 3. p. 1489-1498 10 p.

研究成果: Conference contribution

Research on lift assistance seat for elderly people—focusing on analysis of motion capture and EMG

Matsuo, T., Yamada, K., Yang, W. & Ahrary, A., 2017, Advances in Affective and Pleasurable Design - Proceedings of the AHFE International Conference on Affective and Pleasurable Design, 2016. Springer Verlag, 巻 483. p. 329-337 9 p. (Advances in Intelligent Systems and Computing; 巻数 483).

研究成果: Conference contribution

2 引用 (Scopus)

Research on user-centered information design in SVOD service

Yang, W., Yahiro, S. & Sato, K., 2018 1 1, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 129-135 7 p. (Communications in Computer and Information Science; 巻数 850).

研究成果: Conference contribution

Robust Localization and Position Control for Mobile Robot Using EKF with Disturbance Estimation

Shimada, A., 2018 10 17, Proceedings - 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, Mecatronics 2018. Institute of Electrical and Electronics Engineers Inc., p. 312-315 4 p. 8495723

研究成果: Conference contribution

1 引用 (Scopus)

Saliency map for wide angle fovea vision sensor

Murakami, R., Shimizu, S., Hasebe, N. & Yamazaki, T., 2018 12 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5481-5486 6 p. 8591050. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

研究成果: Conference contribution

1 引用 (Scopus)

Sensor-less grasping control on two-fingered robot hands

Shimada, A., Sonoda, K. & Satoh, Y., 2009 12 1, ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings. p. 40-45 6 p. 5335115. (ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings).

研究成果: Conference contribution

3 引用 (Scopus)

Simultaneous localization assistance for multiple mobile robots using particle filter based target tracking

Jayasekara, P. G., Palafox, L., Sasaki, T., Hashimoto, H. & Lee, B. H., 2010, Proceedings of the 2010 5th International Conference on Information and Automation for Sustainability, ICIAfS 2010. p. 469-474 6 p. 5715707. (Proceedings of the 2010 5th International Conference on Information and Automation for Sustainability, ICIAfS 2010).

研究成果: Conference contribution

1 引用 (Scopus)

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 8 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (版). EDP Sciences, 08002. (MATEC Web of Conferences; 巻数 21).

研究成果: Conference contribution

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 1 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (版). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 1 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (版). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; 巻数 749 KEM).

研究成果: Conference contribution

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 1 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (版). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

Study on improvement of accuracy in end mill machining

Iso, S., Toida, N., Ikeda, N., Kobayashi, Y., Shirai, K. & Tozawa, K., 2007 12 1, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).

研究成果: Conference contribution

Study on the PWM methods of the unbalanced input voltage three level inverter with the energy storage device

Ide, Y., Shimada, A. & Kondo, K., 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications, EPE 2011. 6020414. (Proceedings of the 2011 14th European Conference on Power Electronics and Applications, EPE 2011).

研究成果: Conference contribution

3 引用 (Scopus)

Study on UI of charger in EV charging station

Yang, W., Hirohashi, T. & Choi, Y., 2018, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 410-417 8 p. (Communications in Computer and Information Science; 巻数 852).

研究成果: Conference contribution

System product line engineering for small appliances with driver derivation

Hosoai, S., Noda, N. & Kishi, T., 2016 7 2, Proceedings - 23rd Asia-Pacific Software Engineering Conference, APSEC 2016. Potanin, A., Murphy, G. C., Reeves, S. & Dietrich, J. (版). IEEE Computer Society, p. 389-392 4 p. 7890619. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; 巻数 0).

研究成果: Conference contribution

1 引用 (Scopus)