電気工学科

研究成果

フィルター
Article
2016
1 引用 (Scopus)
2 引用 (Scopus)
2 引用 (Scopus)

MATRIX motor with individual control capability for iron loss suppression under flux weakening control

Hijikata, H., Akatsu, K., Miyama, Y., Arita, H. & Daikoku, A., 2016, : : IEEJ Journal of Industry Applications. 5, 2, p. 176-183 8 p.

研究成果: Article

5 引用 (Scopus)
1 引用 (Scopus)
2 引用 (Scopus)

Notch adaptive filter solution under unbalanced and/or distorted PCC voltage for 3-phase 3-wire shunt active power filter

Tuyen, N. D., Fujita, G. & Muhtazaruddin, M. N. B., 2016 5 6, (Accepted/In press) : : Electrical Engineering. p. 1-12 12 p.

研究成果: Article

4 引用 (Scopus)
2 引用 (Scopus)
2015
20 引用 (Scopus)
23 引用 (Scopus)
2 引用 (Scopus)
2 引用 (Scopus)

Design Methodology for Variable Leakage Flux IPM for Automobile Traction Drives

Kato, T., Minowa, M., Hijikata, H., Akatsu, K. & Lorenz, R. D., 2015 9 1, : : IEEE Transactions on Industry Applications. 51, 5, p. 3811-3821 11 p., 7115116.

研究成果: Article

18 引用 (Scopus)

Development of embedded Mach-Zehnder optical waveguide structures in polydimethylsiloxane thin films by proton beam writing

Kada, W., Miura, K., Kato, H., Saruya, R., Kubota, A., Satoh, T., Koka, M., Ishii, Y., Kamiya, T., Nishikawa, H. & Hanaizumi, O., 2015, : : Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. 348, p. 218-222 5 p.

研究成果: Article

6 引用 (Scopus)

Efficiency Contours and Loss Minimization Over a Driving Cycle of a Variable Flux-Intensifying Machine

Fukushige, T., Limsuwan, N., Kato, T., Akatsu, K. & Lorenz, R. D., 2015 7 1, : : IEEE Transactions on Industry Applications. 51, 4, p. 2984-2989 6 p., 07046393.

研究成果: Article

46 引用 (Scopus)

Electric drive technologies contributing to low-fuel-comsumption vehicles

Mizutani, R., Tachibana, T., Morimoto, M., Akatsu, K. & Hoshi, N., 2015 9 1, : : IEEJ Transactions on Industry Applications. 135, 9, p. 884-891 8 p.

研究成果: Article

10 引用 (Scopus)

Frequency dependence and assembly characteristics of silver nanomaterials trapped by dielectrophoresis

Kataoka, R., Tokita, H., Uchida, S., Sano, R. & Nishikawa, H., 2015 10 26, : : Journal of Physics: Conference Series. 646, 1, 012005.

研究成果: Article

4 引用 (Scopus)
6 引用 (Scopus)
43 引用 (Scopus)

Robotized recognition of a wire harness utilizing tracing operation

Jiang, X., Nagaoka, Y., Ishii, K., Abiko, S., Tsujita, T. & Uchiyama, M., 2015 8, : : Robotics and Computer-Integrated Manufacturing. 34, p. 52-61 10 p.

研究成果: Article

4 引用 (Scopus)

Variable magnetization machine in electrified vehicle application

Fukushige, T., Kato, T., Akatsu, K. & Lorenz, R. D., 2015 9 1, : : IEEJ Transactions on Industry Applications. 135, 9, p. 922-928 7 p.

研究成果: Article

3 引用 (Scopus)
2014

Building of commonsense knowledge for home robotic services: 'Bring something' and 'tidy things up'

Skulkittiyut, W., Lee, H., Trung, N. L. & Mizukawa, M., 2014, : : International Journal of Mechatronics and Automation. 4, 1, p. 1-16 16 p.

研究成果: Article

1 引用 (Scopus)

Delay time compensation based on coefficient of restitution for collision hybrid motion simulator

Abiko, S., Satake, Y., Jiang, X., Tsujita, T. & Uchiyama, M., 2014 9 2, : : Advanced Robotics. 28, 17, p. 1177-1188 12 p.

研究成果: Article

22 引用 (Scopus)

Design and evaluation of a variable-flux flux-intensifying interior permanent-magnet machine

Limsuwan, N., Kato, T., Akatsu, K. & Lorenz, R. D., 2014 1 1, : : IEEE Transactions on Industry Applications. 50, 2, p. 1015-1024 10 p., 6560407.

研究成果: Article

120 引用 (Scopus)
9 引用 (Scopus)

Development of a laser-range-finder-based human tracking and control algorithm for a marathoner service robot

Jung, E. J., Lee, J. H., Yi, B. J., Park, J., Yuta, S. & Noh, S. T., 2014 12, : : IEEE/ASME Transactions on Mechatronics. 19, 6, p. 1963-1975 13 p., 6690173.

研究成果: Article

53 引用 (Scopus)

Distribution Network Loss Minimization via Simultaneous Distributed Generation Coordination with Network Reconfiguration

Muhtazaruddin, M. N., Jamian, J. J., Fujita, G., Baharudin, M. A., Wazir, M. W. & Mokhlis, H., 2014 6, : : Arabian Journal for Science and Engineering. 39, 6, p. 4923-4933 11 p.

研究成果: Article

10 引用 (Scopus)
3 引用 (Scopus)
9 引用 (Scopus)

Proposal of framework based on 4W1H and properties of robots and objects for development of physical service system

Nakamura, Y., Muto, S. Y., Maeda, Y., Mizukawa, M., Motegi, M. & Takashima, Y., 2014 12 1, : : Journal of Robotics and Mechatronics. 26, 6, p. 758-770 13 p.

研究成果: Article

2 引用 (Scopus)

Rare earth reduction using a novel variable magnetomotive force flux-intensified IPM machine

Kato, T., Limsuwan, N., Yu, C. Y., Akatsu, K. & Lorenz, R. D., 2014 1 1, : : IEEE Transactions on Industry Applications. 50, 3, p. 1748-1756 9 p., 6607140.

研究成果: Article

74 引用 (Scopus)
5 引用 (Scopus)

Scan matching method using projection in dominant direction of indoor environment

Bando, S., Tsubouchi, T. & Yuta, SI., 2014 9 17, : : Advanced Robotics. 28, 18, p. 1243-1251 9 p.

研究成果: Article

2 引用 (Scopus)
1 引用 (Scopus)

Suppressing pulsating torques: Torque ripple control for synchronous motors

Nakao, N. & Akatsu, K., 2014 11 1, : : IEEE Industry Applications Magazine. 20, 6, p. 33-44 12 p., 6891141.

研究成果: Article

58 引用 (Scopus)

Vector control specialized for switched reluctance motor drives

Nakao, N. & Akatsu, K., 2014 1 1, : : IEEJ Transactions on Industry Applications. 134, 12, p. 1006-1015 10 p.

研究成果: Article

4 引用 (Scopus)
1 引用 (Scopus)
2013
2 引用 (Scopus)

A study of dual winding method for compound magnetomotive force motor

Hijikata, H., Shigeta, T., Kariya, N., Akatsu, K. & Kato, T., 2013 11 11, : : IEEJ Transactions on Industry Applications. 133, 10, p. 986-994 9 p.

研究成果: Article

3 引用 (Scopus)

A study on improvement in permanent magnet synchronous motor with high permeability magnet

Miyamasu, M., Nakamura, Y., Akatsu, K. & Masuzawa, M., 2013 10 7, : : IEEJ Transactions on Industry Applications. 133, 9, p. 943-951 9 p.

研究成果: Article

3 引用 (Scopus)

Basic properties of an axial-type switched reluctance motor

Arihara, H. & Akatsu, K., 2013 1 28, : : IEEE Transactions on Industry Applications. 49, 1, p. 59-65 7 p., 6361291.

研究成果: Article

27 引用 (Scopus)

Compensation for dead band of force measurement based on the coefficient of restitution in a hybrid simulator

Sugai, F., Abiko, S., Jiang, X., Konno, A. & Uchiyama, M., 2013 8 1, : : Advanced Robotics. 27, 12, p. 907-917 11 p.

研究成果: Article