研究成果

Component based integration of intelligent space and its application to mobile robot navigation

Sasaki, T. & Hashimoto, H., 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2009. p. 1486-1491 6 p. 5229866. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

Computational method for mapping quality of architectural space

Indraprastha, A. & Shinozaki, M., 2011 12 1, Circuit Bending, Breaking and Mending - Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA 2011. p. 473-482 10 p. (Circuit Bending, Breaking and Mending - Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA 2011).

研究成果: Conference contribution

Computing level of privacy in a virtual environment

Indraprastha, A. & Shinozaki, M., 2013 3 1, : : International Journal of Architectural Computing. 11, 1, p. 65-86 22 p.

研究成果: Article

Consistency of visual information in web design - Focusing on responsiveness of a university website

Matsuo, T., Yang, W. & Shibata, N., 2018, Advances in Communication of Design - Proceedings of the AHFE 2017 International Conference on Human Factors in Communication of Design. Springer Verlag, 巻 609. p. 132-140 9 p. (Advances in Intelligent Systems and Computing; 巻数 609).

研究成果: Conference contribution

6 引用 (Scopus)

Daylight simulation in urban open space using radiance

Shinozaki, M., Kuwata, H. & Saito, K., 2000 12 1, Proceedings of the 8th International Conference on Computing in Civil and Building Engineering. p. 1542-1549 8 p. (Proceedings of the 8th International Conference on Computing in Civil and Building Engineering; 巻数 279).

研究成果: Conference contribution

2 引用 (Scopus)

Design and implementation of distributed sensor network for intelligent space based on robot technology components

Sasaki, T. & Hashimoto, H., 2009, Proceedings - 2009 2nd Conference on Human System Interactions, HSI '09. p. 400-405 6 p. 5091013. (Proceedings - 2009 2nd Conference on Human System Interactions, HSI '09).

研究成果: Conference contribution

9 引用 (Scopus)

Design Development of the Support Tool to Prevent Secondary Accidents on Highway

Sato, K. & Yang, W., 2019 1 1, HCI International 2019 - Posters - 21st International Conference, HCII 2019, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 381-388 8 p. (Communications in Computer and Information Science; 巻数 1034).

研究成果: Conference contribution

Development of Air Hockey Robot improving with the human players - Arm control for effective quick draw taking an opponent-s eye movement into account-

Ogawa, M., Shimizu, S., Kadogawa, T., Hashizume, T., Kudoh, S., Suehiro, T., Sato, Y. & Ikeuchi, K., 2011, Proceedings: IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society. p. 3364-3369 6 p. 6119852. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

5 引用 (Scopus)

Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

Nishikawa, N., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 10 25, Advances in Abrasive Technology XVI. p. 293-298 6 p. (Advanced Materials Research; 巻数 797).

研究成果: Conference contribution

Development of electric rust preventive machining method system-safe water using for machining fluid: Complete removal of bacteria (Legionella pneumophila) and assay

Nishikawa, N., Omoe, K., Murakami, K., Sato'o, Y., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2014, : : International Journal of Nanomanufacturing. 10, 1-2, p. 185-200 16 p.

研究成果: Article

公開
公開

Development of Nonmechanical Zoom Lens System using Liquid Crystal

Hirai, H., Shimizu, S., Saito, T., Kurihara, H., Kawamura, M. & Sato, S., 2019 10, Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE Computer Society, p. 5370-5375 6 p. 8927481. (IECON Proceedings (Industrial Electronics Conference); 巻数 2019-October).

研究成果: Conference contribution

Development of position measurement system for construction pile using laser range finder

Inoue, F., Sasaki, T., Huang, X. & Hashimoto, H., 2011, p. 574-580. 7 p.

研究成果: Paper

公開
7 引用 (Scopus)

Development of the lift assist chair for the elderly people “Rakutateru”

Ahrary, A., Yang, W., Inada, M. & Nakamatsu, K., 2018 1 1, : : Procedia Computer Science. 131, p. 31-37 7 p.

研究成果: Conference article

公開
1 引用 (Scopus)

Development of Visual Remote Operation System for Low-Gravity Planet Rover

Shimizu, S., Takewaki, R., Murakami, R., Kameyama, N., Motoi, N., Yamazaki, T. & Hasebe, N., 2019 5 24, Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019. Institute of Electrical and Electronics Engineers Inc., p. 461-466 6 p. 8722907. (Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019).

研究成果: Conference contribution

Development of Wide Angle Fovea Lens for High-Definition Imager over 3 Mega Pixels

Shimizu, S., Murakami, R., Tominaga, M., Akamine, Y., Kawasaki, N., Shimomura, O., Ishimaru, K. & Mita, S., 2018 12 27, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 4232-4237 6 p. 8594194. (IEEE International Conference on Intelligent Robots and Systems).

研究成果: Conference contribution

1 引用 (Scopus)

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 12 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 巻 2017-January. p. 8273-8278 6 p.

研究成果: Conference contribution

1 引用 (Scopus)

Difference of sensitiveness toward information based on user-role

Choi, Y. & Yang, W., 2019 1 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (版). Springer Verlag, p. 318-325 8 p. (Advances in Intelligent Systems and Computing; 巻数 794).

研究成果: Conference contribution

Direct tilt angle control on inverted pendulum mobile robots

Shimizu, Y. & Shimada, A., 2010 6 25, AMC2010 - The 11th IEEE International Workshop on Advanced Motion Control, Proceedings. p. 234-239 6 p. 5463993. (International Workshop on Advanced Motion Control, AMC).

研究成果: Conference contribution

4 引用 (Scopus)

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 1 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (版). Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

1 引用 (Scopus)

Dynamic profiling and feedback framework for reduce-side join

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2013 12 1, p. 1255-1262. 8 p.

研究成果: Paper

Eccentricity compensator for log-polar sensor

Shimizu, S. & Burdick, J. W., 2007, 2007 IEEE International Conference on Robotics and Automation, ICRA'07. p. 4214-4219 6 p. 4209745. (Proceedings - IEEE International Conference on Robotics and Automation).

研究成果: Conference contribution

3 引用 (Scopus)

Eccentricity estimator for wide-angle fovea sensor by FMI descriptor approach

Shimizu, S. & Burdick, J. W., 2009, 2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008. IEEE Computer Society, p. 1377-1382 6 p. 4913201. (2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008).

研究成果: Conference contribution

公開
公開

Effect of optical waveguide on photoluminescence polarization in layered material GaSe with millimeter scale

Suzuki, M., Kohda, M., Takasuna, S., Matsuzaka, S., Sato, Y., Tanabe, T., Oyama, Y. & Nitta, J., 2018 2, : : Japanese Journal of Applied Physics. 57, 2, 020308.

研究成果: Article

2 引用 (Scopus)

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 1 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (版). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; 巻数 825 KEM).

研究成果: Conference contribution

公開
1 引用 (Scopus)

Effects of visual elements into the touch interaction during the drag operation

Yang, W. S., Yusuke, S. & Ahrary, A., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. 6913282. (Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014).

研究成果: Conference contribution

Elaboration model for mapping architectural space

Indraprastha, A. & Shinozaki, M., 2011 11, : : Journal of Asian Architecture and Building Engineering. 10, 2, p. 351-358 8 p.

研究成果: Article

1 引用 (Scopus)

Enhancement of spatial memory using human-object relations

Niitsuma, M., Sasaki, T. & Hashimoto, H., 2008, Proceedings of SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology. p. 3509-3513 5 p. 4655271. (Proceedings of the SICE Annual Conference).

研究成果: Conference contribution

Enhancement of spin-charge current interconversion by oxidation of rhenium

Karube, S., Sugawara, D., Tang, C., Tanabe, T., Oyama, Y. & Nitta, J., 2020 12 15, : : Journal of Magnetism and Magnetic Materials. 516, 167298.

研究成果: Article

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 6 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

研究成果: Conference contribution

4 引用 (Scopus)

Ergonomic guidelines for using notebook personal computers

Saito, S., Piccoli, B., Smith, M. J., Sotoyama, M., Sweitzer, G., Villanueva, M. B. G. & Yoshitake, R., 2000, : : Industrial Health. 38, 4, p. 421-434 14 p.

研究成果: Review article

公開
14 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 1 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (版). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; 巻数 656-657).

研究成果: Conference contribution

1 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014 1 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (版). Trans Tech Publications Ltd, p. 267-272 6 p. (Advanced Materials Research; 巻数 1017).

研究成果: Conference contribution

1 引用 (Scopus)

Evaluation of machining accuracy by measurement of surface texture pattern

Tozawa, K., Toida, N., Kobayashi, Y. & Shirai, K., 2005 12 1, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

研究成果: Conference contribution

2 引用 (Scopus)
4 引用 (Scopus)

Experimental validation of blimp movement control against wind

Morikawa, K. & Shimada, A., 2015 5 1, : : IEEJ Transactions on Industry Applications. 135, 5, p. 488-493 6 p.

研究成果: Article

Eye gaze estimation based on ellipse fitting and three-dimensional model of eye for 'Intelligent Poster'

Urano, R., Suzuki, R. & Sasaki, T., 2014 1 1, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 1157-1162 6 p. 6878237. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

4 引用 (Scopus)

Fabrication of micro diamond- like Carbon-Nozzles by plasma oxidation printing

Aizawa, T., Tamagaki, H. & Wasa, K., 2018 6 1, : : Journal of Micro and Nano-Manufacturing. 6, 2, 021007.

研究成果: Article

1 引用 (Scopus)

Failure-atomic synchronization of memory mapped data in non-volatile memory based system

Haga, K. & Yamazaki, K., 2018 3 1, Proceedings - 12th SEATUC Symposium, SEATUC 2018. Institute of Electrical and Electronics Engineers Inc., 8788878. (Proceedings - 12th SEATUC Symposium, SEATUC 2018).

研究成果: Conference contribution

Fine piercing of electromagnetic steel sheets by micro-punches under nearly zero clearance

Katsuta, E., Aizawa, T., Morita, H., Dohda, K. & Anzai, M., 2018 1 1, : : Procedia Manufacturing. 15, p. 1459-1466 8 p.

研究成果: Conference article

公開
1 引用 (Scopus)

Fine piercing of electromagnetic steel sheets by the plasma-nitrided tools

Aizawa, T., Ktasuta, E., Shiratori, T. & Dohda, K., 2017 1 1, : : Procedia Engineering. 207, p. 1027-1032 6 p.

研究成果: Article

2 引用 (Scopus)