研究成果

公開
1 引用 (Scopus)

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 1 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (版). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 1 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (版). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; 巻数 749 KEM).

研究成果: Conference contribution

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 1 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (版). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

Study on improvement of accuracy in end mill machining

Iso, S., Toida, N., Ikeda, N., Kobayashi, Y., Shirai, K. & Tozawa, K., 2007 12 1, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).

研究成果: Conference contribution

1 引用 (Scopus)
4 引用 (Scopus)

Study on the PWM methods of the unbalanced input voltage three level inverter with the energy storage device

Ide, Y., Shimada, A. & Kondo, K., 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications, EPE 2011. 6020414. (Proceedings of the 2011 14th European Conference on Power Electronics and Applications, EPE 2011).

研究成果: Conference contribution

3 引用 (Scopus)

Study on UI of charger in EV charging station

Yang, W., Hirohashi, T. & Choi, Y., 2018, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 410-417 8 p. (Communications in Computer and Information Science; 巻数 852).

研究成果: Conference contribution

Synthesis and characterization of doped and undoped nano-columnar DLC coating

Hoe, F. J., Aizawa, T. & Yukawa, S., 2013 5 1, : : Jurnal Teknologi (Sciences and Engineering). 62, 1, p. 17-24 8 p.

研究成果: Article

System product line engineering for small appliances with driver derivation

Hosoai, S., Noda, N. & Kishi, T., 2016 7 2, Proceedings - 23rd Asia-Pacific Software Engineering Conference, APSEC 2016. Potanin, A., Murphy, G. C., Reeves, S. & Dietrich, J. (版). IEEE Computer Society, p. 389-392 4 p. 7890619. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; 巻数 0).

研究成果: Conference contribution

1 引用 (Scopus)

Tailor-made tricalcium phosphate bone implant directly fabricated by a three-dimensional ink-jet printer

Igawa, K., Mochizuki, M., Sugimori, O., Shimizu, K., Yamazawa, K., Kawaguchi, H., Nakamura, K., Takato, T., Nishimura, R., Suzuki, S., Anzai, M., Chung, U. I. & Sasaki, N., 2006 12, : : Journal of Artificial Organs. 9, 4, p. 234-240 7 p.

研究成果: Article

50 引用 (Scopus)
7 引用 (Scopus)

TCSC control for longitudinal network

Fujita, G., Yoshihara, S., Shirai, G. & Yokoyama, R., 2002, p. 2023-2027. 5 p.

研究成果: Paper

3 引用 (Scopus)

Tessellation for wide angle foveated image with 4 regions based on overlapping circular receptive field mapping

Shimizu, S. & Hasebe, N., 2016 12 21, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE Computer Society, p. 6187-6192 6 p. 7793888. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

The credibility of the posted information in a recommendation system based on a map

Yamamoto, K., Katagami, D., Nitta, K., Aiba, A. & Kuwata, H., 2006 12 1, Proceedings of the 15th International Conference on World Wide Web. p. 985-986 2 p. (Proceedings of the 15th International Conference on World Wide Web).

研究成果: Conference contribution

The influence of the mechanism of the acoustic sound amplifier on sound transmission

Sato, K. & Yang, W., 2019 1 1, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2018 International Conference on Affective and Pleasurable Design, 2018. Fukuda, S. (版). Springer Verlag, p. 259-268 10 p. (Advances in Intelligent Systems and Computing; 巻数 774).

研究成果: Conference contribution

The relationship between output power and accumulated energy of the unbalanced input voltage three level inverter with the EDLC

Shimada, A., Ide, Y. & Kondo, K., 2012, SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion. p. 649-653 5 p. 6264490. (SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion).

研究成果: Conference contribution

2 引用 (Scopus)

Towards non-mechanical wide angle fovea sensor - Fundamental design by liquid crystal lens cell

Shimizu, S. & Sato, S., 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 3632-3637 6 p. 7392665. (IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society).

研究成果: Conference contribution

3 引用 (Scopus)

Trajectory tracking for wheeled inverted pendulum robot using tilt angle control

Phaoharuhansa, D. & Shimada, A., 2013 12 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4288-4293 6 p. 6699824. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

4 引用 (Scopus)

Trends in usability research and activities in Japan

Kurosu, M., Kobayashi, T., Yoshitake, R., Takahashi, H., Urokohara, H. & Sato, D., 2004, : : International Journal of Human-Computer Interaction. 17, 1, p. 103-124 22 p.

研究成果: Article

5 引用 (Scopus)
8 引用 (Scopus)

Usability and design guideline for designing single handle faucet’s and handle shape

Takagi, R., Hashida, N. & Takeuchi, H., 2019 1 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (版). Springer Verlag, p. 89-98 10 p. (Advances in Intelligent Systems and Computing; 巻数 794).

研究成果: Conference contribution

Variability modeling methods for software product line development

Noda, N. & Kishi, T., 2014 12 14, : : Computer Software. 31, 4, p. 66-76 11 p.

研究成果: Article

Verification in Software Product Line Development.

Noda, N. & Kishi, T., 2013, : : Computer Software. 30, 3, p. 3-17 15 p.

研究成果: Article

1 引用 (Scopus)

Vision System with High Performance Wide Angle Fovea Lens

Murakami, R., Shimizu, S. & Hasebe, N., 2018 10 22, Proceedings - 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation, ETFA 2018. Institute of Electrical and Electronics Engineers Inc., 巻 2018-September. p. 1229-1232 4 p. 8502661

研究成果: Conference contribution

Visualization of Activities-Related Information for Supporting Active Aged Persons

Yang, W., Kato, Y. & Wangmi, S., 2016 1 6, Proceedings - 2015 IIAI 4th International Congress on Advanced Applied Informatics, IIAI-AAI 2015. Institute of Electrical and Electronics Engineers Inc., p. 635-638 4 p. 7373983

研究成果: Conference contribution

Welcome message

Berger, T., Borba, P., Calikli, G., Botterweck, G., Männistö, T., Nadi, S., Kehrer, T., Benavides, D., Martinez, J., Seidl, C., Guo, J., Collet, P., Rubin, J., Diaz, O., Rabiser, R., Elsner, C., Capilla, R., Noda, N., Andersson, J., Mousavi, M. R. および10人, Wortmann, A., Schulze, S., Xiong, Y., Bonifacio, R., Ho-Quang, T., Wohlrab, R., Mukelabai, M., Andric, T., Bosch, J. & Hao, D., 2018 8 20, : : ACM International Conference Proceeding Series. 1, p. x

研究成果: Editorial

Welcome message

Jarzabek, S., Gnesi, S., Noda, N. & Kishi, T., 2013 9 18, : : ACM International Conference Proceeding Series. p. vii

研究成果: Editorial

Welcome message

Duchien, L., Thüm, T., Salinesi, C., Ziadi, T., Heymans, P., Fogdal, T., Martinez, J., Kehrer, T., Teixeira, L., Rabiser, R., Cetina, C., Seidl, C., Mazo, R., Collet, P., Montalvillo, L., Díaz, O., Huchard, M., Berger, T., Noda, N., Botterweck, G. および8人, Hillah, L. M., Robin, J., Quinton, C., Assunção, W. K. G., Shatnawi, A., Tërnava, X., Pereira, J. A. & Dodo, T., 2019 9 9, : : ACM International Conference Proceeding Series. A, p. xi

研究成果: Editorial

22 引用 (Scopus)

Wind-disturbance-based control approach for blimp robots

Furukawa, H. & Shimada, A., 2014 2, : : Electronics and Communications in Japan. 97, 2, p. 52-59 8 p.

研究成果: Article

4 引用 (Scopus)

Wind-disturbance-based control approach for blimp robots

Furukawa, H. & Shimada, A., 2012 10 9, : : IEEJ Transactions on Industry Applications. 132, 5, p. 549-555+4

研究成果: Article

2 引用 (Scopus)

松下幸之助のデザイン観と真野善一の苦悩

Masunari, K., 2017 3 15, : : INDUSTRIAL ART NEWS. No.49, p. 9-16 8 p.

研究成果: Article

日本ソフトウェア科学会第 36 回大会報告

Ito, K. & Noda, N., 2020, : : Computer Software. 37, 2, p. 2-13 12 p.

研究成果: Article