研究成果

2018

Vision System with High Performance Wide Angle Fovea Lens

Murakami, R., Shimizu, S. & Hasebe, N., 2018 10 22, Proceedings - 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation, ETFA 2018. Institute of Electrical and Electronics Engineers Inc., 巻 2018-September. p. 1229-1232 4 p. 8502661

研究成果: Conference contribution

Welcome message

Berger, T., Borba, P., Calikli, G., Botterweck, G., Männistö, T., Nadi, S., Kehrer, T., Benavides, D., Martinez, J., Seidl, C., Guo, J., Collet, P., Rubin, J., Diaz, O., Rabiser, R., Elsner, C., Capilla, R., Noda, N., Andersson, J., Mousavi, M. R. および10人, Wortmann, A., Schulze, S., Xiong, Y., Bonifacio, R., Ho-Quang, T., Wohlrab, R., Mukelabai, M., Andric, T., Bosch, J. & Hao, D., 2018 8 20, : : ACM International Conference Proceeding Series. 1, p. x

研究成果: Editorial

2017
2 引用 (Scopus)

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 12 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 巻 2017-January. p. 8273-8278 6 p.

研究成果: Conference contribution

3 引用 (Scopus)

Fine piercing of electromagnetic steel sheets by the plasma-nitrided tools

Aizawa, T., Ktasuta, E., Shiratori, T. & Dohda, K., 2017 1 1, : : Procedia Engineering. 207, p. 1027-1032 6 p.

研究成果: Article

2 引用 (Scopus)
3 引用 (Scopus)

Mechanical and Corrosion Properties of AZ31 Mg Alloy Processed by Equal-Channel Angular Pressing and Aging

Shahar, I. A., Hosaka, T., Yoshihara, S. & Macdonald, B. J., 2017, : : Procedia Engineering. 184, p. 423-431 9 p.

研究成果: Conference article

7 引用 (Scopus)
4 引用 (Scopus)
12 引用 (Scopus)

Plasma Polishing and Finishing of CVD-Diamond Coated WC (Co) Dies for Dry Stamping

Yunata, E. E., Aizawa, T., Tamaoki, K. & Kasugi, M., 2017 1 1, : : Procedia Engineering. 207, p. 2197-2202 6 p.

研究成果: Article

3 引用 (Scopus)

Reimagining braga

Agirachman, F. A., Ozawa, Y., Indraprastha, A., Shinozaki, M., Sitompul, I. D. M., Nuraeni, R., Chirstanti, A. N., Putra, A. C. & Zefanya, T., 2017 1 1, CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches. Schnabel, M. A., Raonic, A., Janssen, P. & Loh, P. (版). The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), p. 23-32 10 p. (CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches).

研究成果: Conference contribution

Research on lift assistance seat for elderly people—focusing on analysis of motion capture and EMG

Matsuo, T., Yamada, K., Yang, W. & Ahrary, A., 2017, Advances in Affective and Pleasurable Design - Proceedings of the AHFE International Conference on Affective and Pleasurable Design, 2016. Springer Verlag, 巻 483. p. 329-337 9 p. (Advances in Intelligent Systems and Computing; 巻数 483).

研究成果: Conference contribution

2 引用 (Scopus)

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 1 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (版). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; 巻数 749 KEM).

研究成果: Conference contribution

1 引用 (Scopus)

松下幸之助のデザイン観と真野善一の苦悩

Masunari, K., 2017 3 15, : : INDUSTRIAL ART NEWS. No.49, p. 9-16 8 p.

研究成果: Article

2016

A collaborative task experiment by multiple robots in a human environment using the Kukanchi system

Fujimoto, K., Sasaki, T., Sugaya, M., Yoshimi, T., Mizukawa, M. & Matsuhira, N., 2016, Intelligent Robotics and Applications - 9th International Conference, ICIRA 2016, Proceedings. Springer Verlag, 巻 9835. p. 276-282 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 巻数 9835).

研究成果: Conference contribution

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 6 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

研究成果: Conference contribution

3 引用 (Scopus)
5 引用 (Scopus)

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

Aizawa, T., Fukuda, T. & Morita, H., 2016, : : Manufacturing Review. 3, 2016004.

研究成果: Article

4 引用 (Scopus)

Micro-grooving into thick CVD diamond films via hollow-cathode oxygen plasma etching

Yunata, E. E. & Aizawa, T., 2016 4 1, : : Manufacturing Letters. 8, p. 16-20 5 p.

研究成果: Article

6 引用 (Scopus)

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y., 2016 8 30, : : Biofabrication. 8, 3, 035016.

研究成果: Article

7 引用 (Scopus)

Parallelization of recursive preorder traversal based on building and winding call stacks

Nakayama, M., Yamazaki, K. & Tanaka, S., 2016 8 2, Proceedings - 2016 IEEE 30th International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2016. IEEE Computer Society, 巻 2016-August. p. 570-579 10 p. 7529916

研究成果: Conference contribution

2 引用 (Scopus)

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 1 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (版). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 1 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (版). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

System product line engineering for small appliances with driver derivation

Hosoai, S., Noda, N. & Kishi, T., 2016 7 2, Proceedings - 23rd Asia-Pacific Software Engineering Conference, APSEC 2016. Potanin, A., Murphy, G. C., Reeves, S. & Dietrich, J. (版). IEEE Computer Society, p. 389-392 4 p. 7890619. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; 巻数 0).

研究成果: Conference contribution

1 引用 (Scopus)

Visualization of Activities-Related Information for Supporting Active Aged Persons

Yang, W., Kato, Y. & Wangmi, S., 2016 1 6, Proceedings - 2015 IIAI 4th International Congress on Advanced Applied Informatics, IIAI-AAI 2015. Institute of Electrical and Electronics Engineers Inc., p. 635-638 4 p. 7373983

研究成果: Conference contribution

2015

A path motion planning for humanoid climbing robot

Nguyen, D. & Shimada, A., 2015 1 8, Proceedings - 8th EUROSIM Congress on Modelling and Simulation, EUROSIM 2013. Al-Begain, K., Al-Begain, K., Al-Dabass, D., Al-Dabass, D., Orsoni, A., Orsoni, A., Cant, R., Cant, R. & Zobel, R. (版). Institute of Electrical and Electronics Engineers Inc., p. 179-184 6 p. 7004939. (Proceedings - 8th EUROSIM Congress on Modelling and Simulation, EUROSIM 2013).

研究成果: Conference contribution

1 引用 (Scopus)
1 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 1 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (版). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; 巻数 656-657).

研究成果: Conference contribution

1 引用 (Scopus)

Experimental validation of blimp movement control against wind

Morikawa, K. & Shimada, A., 2015 5 1, : : IEEJ Transactions on Industry Applications. 135, 5, p. 488-493 6 p.

研究成果: Article

3 引用 (Scopus)

Operation sound influence on tablet device character input operation

Yang, W., Kondo, H. & Seok, W. M., 2015, Communications in Computer and Information Science. Springer Verlag, 巻 529. p. 51-56 6 p. (Communications in Computer and Information Science; 巻数 529).

研究成果: Conference contribution

1 引用 (Scopus)

Parallelization of tree-to-TLV serialization

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2015 1 20, 2014 IEEE 33rd International Performance Computing and Communications Conference, IPCCC 2014. Institute of Electrical and Electronics Engineers Inc., 巻 2014-January. 7017059

研究成果: Conference contribution

1 引用 (Scopus)
8 引用 (Scopus)

Plasma assisted nitriding for micro-texturing onto martensitic stainless steels ∗

Katoh, T., Aizawa, T. & Yamaguchi, T., 2015, : : Manufacturing Review. 2, 2015004.

研究成果: Article

5 引用 (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 8 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (版). EDP Sciences, 09002. (MATEC Web of Conferences; 巻数 21).

研究成果: Conference contribution

9 引用 (Scopus)

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 8 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (版). EDP Sciences, 08002. (MATEC Web of Conferences; 巻数 21).

研究成果: Conference contribution

2014

Altitude control using limited pole placement on coaxial-helicopter

Sugawara, Y. & Shimada, A., 2014 1 1, 2014 IEEE 13th International Workshop on Advanced Motion Control, AMC 2014. Institute of Electrical and Electronics Engineers Inc., p. 506-511 6 p. 6823333. (International Workshop on Advanced Motion Control, AMC).

研究成果: Conference contribution

1 引用 (Scopus)