デザイン工学科

研究成果

2014

Development of electric rust preventive machining method system-safe water using for machining fluid: Complete removal of bacteria (Legionella pneumophila) and assay

Nishikawa, N., Omoe, K., Murakami, K., Sato'o, Y., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2014, : : International Journal of Nanomanufacturing. 10, 1-2, p. 185-200 16 p.

研究成果: Article

Development of wide angle fovea telescope

Shimizu, S., Hashizume, T. & Tanzawa, Y., 2014 1 1, 2014 IEEE 13th International Workshop on Advanced Motion Control, AMC 2014. Institute of Electrical and Electronics Engineers Inc., p. 552-556 5 p. 6823341. (International Workshop on Advanced Motion Control, AMC).

研究成果: Conference contribution

Disaster back-up support using GIS contents composed of images from satellite and UAV

Shimizu, S., Suzuki, T., Ogawa, M., Fukazawa, Y., Shibayama, Y. & Hashizume, T., 2014 3 11, Field and Service Robotics - Results of the 8th International Conference. p. 81-96 16 p. (Springer Tracts in Advanced Robotics; 巻数 92).

研究成果: Conference contribution

Effect of axial force on corrosion behavior of SUS304 stainless steel bolt

Nakamura, Y., Yoshihara, S., MacDonald, B. J. & Galvin, E., 2014 1 1, THERMEC 2013 Supplement. Trans Tech Publications, p. 519-524 6 p. (Advanced Materials Research; 巻数 922).

研究成果: Conference contribution

Effects of visual elements into the touch interaction during the drag operation

Yang, W. S., Yusuke, S. & Ahrary, A., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. 6913282. (Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014).

研究成果: Conference contribution

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014 1 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (版). Trans Tech Publications Ltd, p. 267-272 6 p. (Advanced Materials Research; 巻数 1017).

研究成果: Conference contribution

1 引用 (Scopus)

Eye gaze estimation based on ellipse fitting and three-dimensional model of eye for 'Intelligent Poster'

Urano, R., Suzuki, R. & Sasaki, T., 2014 1 1, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 1157-1162 6 p. 6878237. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

4 引用 (Scopus)

Frictional properties of diamond-like carbon coated tool in dry intermittent machining of aluminum alloy 5052

Yokota, T., Sawa, T., Yokouchi, M., Tozawa, K., Anzai, M. & Aizawa, T., 2014 4 1, : : Precision Engineering. 38, 2, p. 365-370 6 p.

研究成果: Article

13 引用 (Scopus)

IoT-security approach analysis for the novel nutrition-based vegetable production and distribution system

Dennis, A. L. R., Ahrary, A., Horibe, N. & Yang, W. S., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 185-189 5 p. 6913291. (Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014).

研究成果: Conference contribution

4 引用 (Scopus)

Large area micro-texture imprinting onto metallic sheet via CNC stamping

Aizawa, T., Tamaki, M. & Fukuda, T., 2014, 11th International Conference on Technology of Plasticity, ICTP 2014. Elsevier Ltd, 巻 81. p. 1427-1432 6 p.

研究成果: Conference contribution

5 引用 (Scopus)

Motion-controlled precise stamping for microtexturing onto aluminum sheet

Aizawa, T., Itoh, T., Tamaki, M. & Fukuda, T., 2014 1 1, Metal Forming 2014. Micari, F. & Fratini, L. (版). Trans Tech Publications Ltd, p. 64-71 8 p. (Key Engineering Materials; 巻数 622-623).

研究成果: Conference contribution

Multi-rate discrete control for omni-directional robot in intelligent space

Phaoharuhansa, D. & Shimada, A., 2014 10 23, Proceedings of the SICE Annual Conference. Society of Instrument and Control Engineers (SICE), p. 1867-1873 7 p. 6935307. (Proceedings of the SICE Annual Conference).

研究成果: Conference contribution

Quantitative analysis of tennis experts' eye movement skill

Shimizu, S., Kadogawa, T., Kikuchi, S. I. & Hashizume, T., 2014 1 1, 2014 IEEE 13th International Workshop on Advanced Motion Control, AMC 2014. Institute of Electrical and Electronics Engineers Inc., p. 203-207 5 p. 6823282. (International Workshop on Advanced Motion Control, AMC).

研究成果: Conference contribution

1 引用 (Scopus)
7 引用 (Scopus)

Variability modeling methods for software product line development

Noda, N. & Kishi, T., 2014 12 14, : : Computer Software. 31, 4, p. 66-76 11 p.

研究成果: Article

Wind-disturbance-based control approach for blimp robots

Furukawa, H. & Shimada, A., 2014 2, : : Electronics and Communications in Japan. 97, 2, p. 52-59 8 p.

研究成果: Article

4 引用 (Scopus)

An accurate and efficient pile driver positioning system using laser range finder

Huang, X., Sasaki, T., Hashimoto, H., Inoue, F., Zheng, B., Masuda, T. & Ikeuchi, K., 2013 9 5, Advances in Depth Image Analysis and Applications - International Workshop, WDIA 2012, Selected and Invited Papers. p. 158-167 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 巻数 7854 LNCS).

研究成果: Conference contribution

Computing level of privacy in a virtual environment

Indraprastha, A. & Shinozaki, M., 2013 3 1, : : International Journal of Architectural Computing. 11, 1, p. 65-86 22 p.

研究成果: Article

6 引用 (Scopus)

Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

Nishikawa, N., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 10 25, Advances in Abrasive Technology XVI. p. 293-298 6 p. (Advanced Materials Research; 巻数 797).

研究成果: Conference contribution

Development of electric rust preventive machining method system - safe water using for machining fluid: Complete removal of bacteria (Enterobacter aerogenes)-

Nishikawa, N., Omoe, K., Murakami, K., Sato, Y., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 12 1, : : International Journal of Precision Engineering and Manufacturing. 14, 6, p. 897-902 6 p.

研究成果: Article

13 引用 (Scopus)

Dynamic profiling and feedback framework for reduce-side join

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2013 12 1, p. 1255-1262. 8 p.

研究成果: Paper

公開

Humanoid climbing robot modeling in matlab-simechanics

Dung, N. A. & Shimada, A., 2013 12 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4162-4167 6 p. 6699803. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

4 引用 (Scopus)

Joint workshop of the 5th International Workshop on Model-Driven Approaches in Software Product Line Engineering and the 4th Workshop on Scalable Modeling Techniques for Software Product Lines (MAPLE/SCALE 2013)

Botterweck, G., Dhungana, D., Noda, N., Rabiser, R. & Washizaki, H., 2013 9 18, Proceedings of the 17th International Software Product Line Conference, SPLC 2013. 1 p. (ACM International Conference Proceeding Series).

研究成果: Conference contribution

Micro-texturing onto amorphous carbon materials as a mold-die for micro-forming

Aizawa, T., 2013 3 11, Micro Manufacturing Techniques and Applications. p. 23-37 15 p. (Applied Mechanics and Materials; 巻数 289).

研究成果: Conference contribution

9 引用 (Scopus)

Modelling and simulation of robotic systems using sysml

Rahman, M. A. A., Mizukawa, M., Phaoharuhansa, D. & Shimada, A., 2013, : : International Journal of Modelling and Simulation. 33, 3, p. 152-161 10 p.

研究成果: Article

6 引用 (Scopus)
30 引用 (Scopus)

Oxygen plasma etching of diamond-like carbon coated mold-die for micro-texturing

Aizawa, T. & Fukuda, T., 2013 1 25, : : Surface and Coatings Technology. 215, p. 364-368 5 p.

研究成果: Article

13 引用 (Scopus)

Refining outdoor photometric stereo based on sky model

Inose, K., Shimizu, S., Kawakami, R., Mukaigawa, Y. & Ikeuchi, K., 2013 7 1, : : IPSJ Transactions on Computer Vision and Applications. 5, p. 104-108 5 p.

研究成果: Article

3 引用 (Scopus)

Synthesis and characterization of doped and undoped nano-columnar DLC coating

Hoe, F. J., Aizawa, T. & Yukawa, S., 2013 5 1, : : Jurnal Teknologi (Sciences and Engineering). 62, 1, p. 17-24 8 p.

研究成果: Article

Trajectory tracking for wheeled inverted pendulum robot using tilt angle control

Phaoharuhansa, D. & Shimada, A., 2013 12 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4288-4293 6 p. 6699824. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

3 引用 (Scopus)

Verification in Software Product Line Development.

Noda, N. & Kishi, T., 2013, : : Computer Software. 30, 3, p. 3-17 15 p.

研究成果: Article

1 引用 (Scopus)

Welcome message

Jarzabek, S., Gnesi, S., Noda, N. & Kishi, T., 2013 9 18, : : ACM International Conference Proceeding Series. p. vii

研究成果: Editorial

2012

Advanced fracture mechanics design of diamond-like carbon coating against delamination behavior

Aizawa, T., 2012 9 1, Recent Trends in Fracture Mechanics. Nova Science Publishers, Inc., p. 323-344 22 p.

研究成果: Chapter

An adaptive disturbance observer design on motion control systems

Shimada, A. & Phaoharuhansa, D., 2012 11 27, 2012 International Conference onAdvanced Mechatronic Systems, ICAMechS 2012. p. 320-322 3 p. 6329731. (2012 International Conference onAdvanced Mechatronic Systems, ICAMechS 2012).

研究成果: Conference contribution

2 引用 (Scopus)
5 引用 (Scopus)

Circle fitting based pile positioning and machine pose estimation from range data for pile driver navigation

Sasaki, T., Kawahara, H., Inoue, F. & Hashimoto, H., 2012 1 1, SYROCO 2012 Preprints - 10th IFAC Symposium on Robot Control. 22 版 IFAC Secretariat, p. 848-853 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); 巻数 45, 番号 22).

研究成果: Conference contribution

1 引用 (Scopus)
13 引用 (Scopus)

Cutting performance of different types of diamond-like carbon coatings

Yokota, T., Sawa, T. & Yokouchi, M., 2012 12 1, 10th International Conference on Progress of Machining Technology, ICPMT 2012. p. 173-176 4 p. (10th International Conference on Progress of Machining Technology, ICPMT 2012).

研究成果: Conference contribution

2 引用 (Scopus)

Development of electric rust preventive machining method - Correspond to difference of water in world: Use of adjusted synthesized water

Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 4 30, Ultra-Precision Machining Technologies. p. 373-381 9 p. (Advanced Materials Research; 巻数 497).

研究成果: Conference contribution

5 引用 (Scopus)

Development of electric rust preventive machining method - Correspond to difference of water in world: Use of deionized refined water

Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012 4 30, Ultra-Precision Machining Technologies. p. 365-372 8 p. (Advanced Materials Research; 巻数 497).

研究成果: Conference contribution

5 引用 (Scopus)