研究成果

2015
8 引用 (Scopus)

Plasma assisted nitriding for micro-texturing onto martensitic stainless steels ∗

Katoh, T., Aizawa, T. & Yamaguchi, T., 2015, : : Manufacturing Review. 2, 2015004.

研究成果: Article

5 引用 (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 8 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (版). EDP Sciences, 09002. (MATEC Web of Conferences; 巻数 21).

研究成果: Conference contribution

9 引用 (Scopus)

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 8 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (版). EDP Sciences, 08002. (MATEC Web of Conferences; 巻数 21).

研究成果: Conference contribution

Towards non-mechanical wide angle fovea sensor - Fundamental design by liquid crystal lens cell

Shimizu, S. & Sato, S., 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 3632-3637 6 p. 7392665. (IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society).

研究成果: Conference contribution

3 引用 (Scopus)
2016

A collaborative task experiment by multiple robots in a human environment using the Kukanchi system

Fujimoto, K., Sasaki, T., Sugaya, M., Yoshimi, T., Mizukawa, M. & Matsuhira, N., 2016, Intelligent Robotics and Applications - 9th International Conference, ICIRA 2016, Proceedings. Springer Verlag, 巻 9835. p. 276-282 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 巻数 9835).

研究成果: Conference contribution

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 6 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

研究成果: Conference contribution

3 引用 (Scopus)
5 引用 (Scopus)

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

Aizawa, T., Fukuda, T. & Morita, H., 2016, : : Manufacturing Review. 3, 2016004.

研究成果: Article

4 引用 (Scopus)

Micro-grooving into thick CVD diamond films via hollow-cathode oxygen plasma etching

Yunata, E. E. & Aizawa, T., 2016 4 1, : : Manufacturing Letters. 8, p. 16-20 5 p.

研究成果: Article

6 引用 (Scopus)

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y., 2016 8 30, : : Biofabrication. 8, 3, 035016.

研究成果: Article

7 引用 (Scopus)

Parallelization of recursive preorder traversal based on building and winding call stacks

Nakayama, M., Yamazaki, K. & Tanaka, S., 2016 8 2, Proceedings - 2016 IEEE 30th International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2016. IEEE Computer Society, 巻 2016-August. p. 570-579 10 p. 7529916

研究成果: Conference contribution

2 引用 (Scopus)

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016 1 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (版). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 1 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (版). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

System product line engineering for small appliances with driver derivation

Hosoai, S., Noda, N. & Kishi, T., 2016 7 2, Proceedings - 23rd Asia-Pacific Software Engineering Conference, APSEC 2016. Potanin, A., Murphy, G. C., Reeves, S. & Dietrich, J. (版). IEEE Computer Society, p. 389-392 4 p. 7890619. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; 巻数 0).

研究成果: Conference contribution

1 引用 (Scopus)

Tessellation for wide angle foveated image with 4 regions based on overlapping circular receptive field mapping

Shimizu, S. & Hasebe, N., 2016 12 21, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE Computer Society, p. 6187-6192 6 p. 7793888. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

Visualization of Activities-Related Information for Supporting Active Aged Persons

Yang, W., Kato, Y. & Wangmi, S., 2016 1 6, Proceedings - 2015 IIAI 4th International Congress on Advanced Applied Informatics, IIAI-AAI 2015. Institute of Electrical and Electronics Engineers Inc., p. 635-638 4 p. 7373983

研究成果: Conference contribution

2017
2 引用 (Scopus)

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 12 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 巻 2017-January. p. 8273-8278 6 p.

研究成果: Conference contribution

3 引用 (Scopus)

Fine piercing of electromagnetic steel sheets by the plasma-nitrided tools

Aizawa, T., Ktasuta, E., Shiratori, T. & Dohda, K., 2017 1 1, : : Procedia Engineering. 207, p. 1027-1032 6 p.

研究成果: Article

2 引用 (Scopus)
3 引用 (Scopus)

Mechanical and Corrosion Properties of AZ31 Mg Alloy Processed by Equal-Channel Angular Pressing and Aging

Shahar, I. A., Hosaka, T., Yoshihara, S. & Macdonald, B. J., 2017, : : Procedia Engineering. 184, p. 423-431 9 p.

研究成果: Conference article

7 引用 (Scopus)
4 引用 (Scopus)
12 引用 (Scopus)

Plasma Polishing and Finishing of CVD-Diamond Coated WC (Co) Dies for Dry Stamping

Yunata, E. E., Aizawa, T., Tamaoki, K. & Kasugi, M., 2017 1 1, : : Procedia Engineering. 207, p. 2197-2202 6 p.

研究成果: Article

3 引用 (Scopus)

Reimagining braga

Agirachman, F. A., Ozawa, Y., Indraprastha, A., Shinozaki, M., Sitompul, I. D. M., Nuraeni, R., Chirstanti, A. N., Putra, A. C. & Zefanya, T., 2017 1 1, CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches. Schnabel, M. A., Raonic, A., Janssen, P. & Loh, P. (版). The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), p. 23-32 10 p. (CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches).

研究成果: Conference contribution

Research on lift assistance seat for elderly people—focusing on analysis of motion capture and EMG

Matsuo, T., Yamada, K., Yang, W. & Ahrary, A., 2017, Advances in Affective and Pleasurable Design - Proceedings of the AHFE International Conference on Affective and Pleasurable Design, 2016. Springer Verlag, 巻 483. p. 329-337 9 p. (Advances in Intelligent Systems and Computing; 巻数 483).

研究成果: Conference contribution

2 引用 (Scopus)

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017 1 1, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (版). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; 巻数 749 KEM).

研究成果: Conference contribution

1 引用 (Scopus)

松下幸之助のデザイン観と真野善一の苦悩

Masunari, K., 2017 3 15, : : INDUSTRIAL ART NEWS. No.49, p. 9-16 8 p.

研究成果: Article

2018

A DLC-punch array to fabricate the micro-textured aluminum sheet for boiling heat transfer control

Aizawa, T., Wasa, K. & Tamagaki, H., 2018 3 25, : : Micromachines. 9, 4, 147.

研究成果: Article

5 引用 (Scopus)

Analysis of information provision methods for indoor navigation using interactive floor projection

Suyama, M., Hayashi, F. & Sasaki, T., 2018 2 1, SII 2017 - 2017 IEEE/SICE International Symposium on System Integration. Institute of Electrical and Electronics Engineers Inc., 巻 2018-January. p. 1010-1015 6 p.

研究成果: Conference contribution

An Attitude Control Considering Sideslip Phenomenon Using DOB-Based LMPC-LQR for Four-Wheel Steering Vehicle

Soubou, H., Ohhira, T. & Shimada, A., 2018 10 15, 2018 57th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2018. Institute of Electrical and Electronics Engineers Inc., p. 1544-1550 7 p. 8492534

研究成果: Conference contribution

Consistency of visual information in web design - Focusing on responsiveness of a university website

Matsuo, T., Yang, W. & Shibata, N., 2018, Advances in Communication of Design - Proceedings of the AHFE 2017 International Conference on Human Factors in Communication of Design. Springer Verlag, 巻 609. p. 132-140 9 p. (Advances in Intelligent Systems and Computing; 巻数 609).

研究成果: Conference contribution

Development of the lift assist chair for the elderly people “Rakutateru”

Ahrary, A., Yang, W., Inada, M. & Nakamatsu, K., 2018 1 1, : : Procedia Computer Science. 131, p. 31-37 7 p.

研究成果: Conference article

公開
1 引用 (Scopus)

Development of Wide Angle Fovea Lens for High-Definition Imager over 3 Mega Pixels

Shimizu, S., Murakami, R., Tominaga, M., Akamine, Y., Kawasaki, N., Shimomura, O., Ishimaru, K. & Mita, S., 2018 12 27, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 4232-4237 6 p. 8594194. (IEEE International Conference on Intelligent Robots and Systems).

研究成果: Conference contribution

1 引用 (Scopus)

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 1 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (版). Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

1 引用 (Scopus)

Effect of optical waveguide on photoluminescence polarization in layered material GaSe with millimeter scale

Suzuki, M., Kohda, M., Takasuna, S., Matsuzaka, S., Sato, Y., Tanabe, T., Oyama, Y. & Nitta, J., 2018 2, : : Japanese Journal of Applied Physics. 57, 2, 020308.

研究成果: Article

2 引用 (Scopus)