研究成果

Frege's Redundancy Thesis

Sakuragi, S., 2006 6 25, : : Philosophy of Science. 39, p. 29-45

研究成果: Article

Fine piercing of electromagnetic steel sheets by the plasma-nitrided tools

Aizawa, T., Ktasuta, E., Shiratori, T. & Dohda, K., 2017 1 1, : : Procedia Engineering. 207, p. 1027-1032 6 p.

研究成果: Article

2 引用 (Scopus)

Fine piercing of electromagnetic steel sheets by micro-punches under nearly zero clearance

Katsuta, E., Aizawa, T., Morita, H., Dohda, K. & Anzai, M., 2018 1 1, : : Procedia Manufacturing. 15, p. 1459-1466 8 p.

研究成果: Conference article

公開
1 引用 (Scopus)

Failure-atomic synchronization of memory mapped data in non-volatile memory based system

Haga, K. & Yamazaki, K., 2018 3 1, Proceedings - 12th SEATUC Symposium, SEATUC 2018. Institute of Electrical and Electronics Engineers Inc., 8788878. (Proceedings - 12th SEATUC Symposium, SEATUC 2018).

研究成果: Conference contribution

Fabrication of micro diamond- like Carbon-Nozzles by plasma oxidation printing

Aizawa, T., Tamagaki, H. & Wasa, K., 2018 6 1, : : Journal of Micro and Nano-Manufacturing. 6, 2, 021007.

研究成果: Article

1 引用 (Scopus)

Eye gaze estimation based on ellipse fitting and three-dimensional model of eye for 'Intelligent Poster'

Urano, R., Suzuki, R. & Sasaki, T., 2014 1 1, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 1157-1162 6 p. 6878237. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

4 引用 (Scopus)

Experimental validation of blimp movement control against wind

Morikawa, K. & Shimada, A., 2015 5 1, : : IEEJ Transactions on Industry Applications. 135, 5, p. 488-493 6 p.

研究成果: Article

4 引用 (Scopus)

Evaluation of machining accuracy by measurement of surface texture pattern

Tozawa, K., Toida, N., Kobayashi, Y. & Shirai, K., 2005 12 1, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

研究成果: Conference contribution

2 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014 1 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (版). Trans Tech Publications Ltd, p. 267-272 6 p. (Advanced Materials Research; 巻数 1017).

研究成果: Conference contribution

1 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 1 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (版). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; 巻数 656-657).

研究成果: Conference contribution

1 引用 (Scopus)

Ergonomic guidelines for using notebook personal computers

Saito, S., Piccoli, B., Smith, M. J., Sotoyama, M., Sweitzer, G., Villanueva, M. B. G. & Yoshitake, R., 2000, : : Industrial Health. 38, 4, p. 421-434 14 p.

研究成果: Review article

公開
14 引用 (Scopus)

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 6 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

研究成果: Conference contribution

4 引用 (Scopus)

Enhancement of spin-charge current interconversion by oxidation of rhenium

Karube, S., Sugawara, D., Tang, C., Tanabe, T., Oyama, Y. & Nitta, J., 2020 12 15, : : Journal of Magnetism and Magnetic Materials. 516, 167298.

研究成果: Article

Enhancement of spatial memory using human-object relations

Niitsuma, M., Sasaki, T. & Hashimoto, H., 2008, Proceedings of SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology. p. 3509-3513 5 p. 4655271. (Proceedings of the SICE Annual Conference).

研究成果: Conference contribution

Elaboration model for mapping architectural space

Indraprastha, A. & Shinozaki, M., 2011 11, : : Journal of Asian Architecture and Building Engineering. 10, 2, p. 351-358 8 p.

研究成果: Article

1 引用 (Scopus)

Effects of visual elements into the touch interaction during the drag operation

Yang, W. S., Yusuke, S. & Ahrary, A., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. 6913282. (Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014).

研究成果: Conference contribution

公開
1 引用 (Scopus)

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 1 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (版). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; 巻数 825 KEM).

研究成果: Conference contribution

Effect of optical waveguide on photoluminescence polarization in layered material GaSe with millimeter scale

Suzuki, M., Kohda, M., Takasuna, S., Matsuzaka, S., Sato, Y., Tanabe, T., Oyama, Y. & Nitta, J., 2018 2, : : Japanese Journal of Applied Physics. 57, 2, 020308.

研究成果: Article

2 引用 (Scopus)
公開
公開

Eccentricity estimator for wide-angle fovea sensor by FMI descriptor approach

Shimizu, S. & Burdick, J. W., 2009, 2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008. IEEE Computer Society, p. 1377-1382 6 p. 4913201. (2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008).

研究成果: Conference contribution

Eccentricity compensator for log-polar sensor

Shimizu, S. & Burdick, J. W., 2007, 2007 IEEE International Conference on Robotics and Automation, ICRA'07. p. 4214-4219 6 p. 4209745. (Proceedings - IEEE International Conference on Robotics and Automation).

研究成果: Conference contribution

3 引用 (Scopus)

Dynamic profiling and feedback framework for reduce-side join

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2013 12 1, p. 1255-1262. 8 p.

研究成果: Paper

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 1 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (版). Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

1 引用 (Scopus)

Direct tilt angle control on inverted pendulum mobile robots

Shimizu, Y. & Shimada, A., 2010 6 25, AMC2010 - The 11th IEEE International Workshop on Advanced Motion Control, Proceedings. p. 234-239 6 p. 5463993. (International Workshop on Advanced Motion Control, AMC).

研究成果: Conference contribution

4 引用 (Scopus)

Difference of sensitiveness toward information based on user-role

Choi, Y. & Yang, W., 2019 1 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (版). Springer Verlag, p. 318-325 8 p. (Advances in Intelligent Systems and Computing; 巻数 794).

研究成果: Conference contribution

1 引用 (Scopus)

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 12 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 巻 2017-January. p. 8273-8278 6 p.

研究成果: Conference contribution

Development of Wide Angle Fovea Lens for High-Definition Imager over 3 Mega Pixels

Shimizu, S., Murakami, R., Tominaga, M., Akamine, Y., Kawasaki, N., Shimomura, O., Ishimaru, K. & Mita, S., 2018 12 27, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 4232-4237 6 p. 8594194. (IEEE International Conference on Intelligent Robots and Systems).

研究成果: Conference contribution

1 引用 (Scopus)

Development of Visual Remote Operation System for Low-Gravity Planet Rover

Shimizu, S., Takewaki, R., Murakami, R., Kameyama, N., Motoi, N., Yamazaki, T. & Hasebe, N., 2019 5 24, Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019. Institute of Electrical and Electronics Engineers Inc., p. 461-466 6 p. 8722907. (Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019).

研究成果: Conference contribution

Development of the lift assist chair for the elderly people “Rakutateru”

Ahrary, A., Yang, W., Inada, M. & Nakamatsu, K., 2018 1 1, : : Procedia Computer Science. 131, p. 31-37 7 p.

研究成果: Conference article

公開
1 引用 (Scopus)

Development of position measurement system for construction pile using laser range finder

Inoue, F., Sasaki, T., Huang, X. & Hashimoto, H., 2011, p. 574-580. 7 p.

研究成果: Paper

公開
7 引用 (Scopus)

Development of Nonmechanical Zoom Lens System using Liquid Crystal

Hirai, H., Shimizu, S., Saito, T., Kurihara, H., Kawamura, M. & Sato, S., 2019 10, Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE Computer Society, p. 5370-5375 6 p. 8927481. (IECON Proceedings (Industrial Electronics Conference); 巻数 2019-October).

研究成果: Conference contribution

公開
公開

Development of electric rust preventive machining method system-safe water using for machining fluid: Complete removal of bacteria (Legionella pneumophila) and assay

Nishikawa, N., Omoe, K., Murakami, K., Sato'o, Y., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2014, : : International Journal of Nanomanufacturing. 10, 1-2, p. 185-200 16 p.

研究成果: Article

Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

Nishikawa, N., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 10 25, Advances in Abrasive Technology XVI. p. 293-298 6 p. (Advanced Materials Research; 巻数 797).

研究成果: Conference contribution

Development of Air Hockey Robot improving with the human players - Arm control for effective quick draw taking an opponent-s eye movement into account-

Ogawa, M., Shimizu, S., Kadogawa, T., Hashizume, T., Kudoh, S., Suehiro, T., Sato, Y. & Ikeuchi, K., 2011, Proceedings: IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society. p. 3364-3369 6 p. 6119852. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

5 引用 (Scopus)

Design Development of the Support Tool to Prevent Secondary Accidents on Highway

Sato, K. & Yang, W., 2019 1 1, HCI International 2019 - Posters - 21st International Conference, HCII 2019, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 381-388 8 p. (Communications in Computer and Information Science; 巻数 1034).

研究成果: Conference contribution

Design and implementation of distributed sensor network for intelligent space based on robot technology components

Sasaki, T. & Hashimoto, H., 2009, Proceedings - 2009 2nd Conference on Human System Interactions, HSI '09. p. 400-405 6 p. 5091013. (Proceedings - 2009 2nd Conference on Human System Interactions, HSI '09).

研究成果: Conference contribution

9 引用 (Scopus)
2 引用 (Scopus)

Daylight simulation in urban open space using radiance

Shinozaki, M., Kuwata, H. & Saito, K., 2000 12 1, Proceedings of the 8th International Conference on Computing in Civil and Building Engineering. p. 1542-1549 8 p. (Proceedings of the 8th International Conference on Computing in Civil and Building Engineering; 巻数 279).

研究成果: Conference contribution

6 引用 (Scopus)

Consistency of visual information in web design - Focusing on responsiveness of a university website

Matsuo, T., Yang, W. & Shibata, N., 2018, Advances in Communication of Design - Proceedings of the AHFE 2017 International Conference on Human Factors in Communication of Design. Springer Verlag, 巻 609. p. 132-140 9 p. (Advances in Intelligent Systems and Computing; 巻数 609).

研究成果: Conference contribution

Computing level of privacy in a virtual environment

Indraprastha, A. & Shinozaki, M., 2013 3 1, : : International Journal of Architectural Computing. 11, 1, p. 65-86 22 p.

研究成果: Article