研究成果

Conference contribution

Collaborative robots system in a photography service using Kukanchi

Nakai, T., Nakamura, Y., Sasaki, T. & Matsuhira, N., 2019 1 24, 2018 IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO 2018. IEEE Computer Society, p. 111-116 6 p. 8625761. (Proceedings of IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO; 巻数 2018-September).

研究成果: Conference contribution

Communication oriented WebGIS for collaborative urban planning

Chiba, S. & Shinozaki, M., 2000, Computing in Civil and Building Engineering. Fruchter, R., Pena-Mora, F. & Roddis, W. M. K. (版). ASCE - American Society of Civil Engineers, p. 233-239 7 p. (Computing in Civil and Building Engineering; 巻数 1).

研究成果: Conference contribution

1 引用 (Scopus)

Component based integration of intelligent space and its application to mobile robot navigation

Sasaki, T. & Hashimoto, H., 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2009. p. 1486-1491 6 p. 5229866. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

Computational method for mapping quality of architectural space

Indraprastha, A. & Shinozaki, M., 2011 12 1, Circuit Bending, Breaking and Mending - Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA 2011. p. 473-482 10 p. (Circuit Bending, Breaking and Mending - Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, CAADRIA 2011).

研究成果: Conference contribution

Consistency of visual information in web design - Focusing on responsiveness of a university website

Matsuo, T., Yang, W. & Shibata, N., 2018, Advances in Communication of Design - Proceedings of the AHFE 2017 International Conference on Human Factors in Communication of Design. Springer Verlag, 巻 609. p. 132-140 9 p. (Advances in Intelligent Systems and Computing; 巻数 609).

研究成果: Conference contribution

Daylight simulation in urban open space using radiance

Shinozaki, M., Kuwata, H. & Saito, K., 2000 12 1, Proceedings of the 8th International Conference on Computing in Civil and Building Engineering. p. 1542-1549 8 p. (Proceedings of the 8th International Conference on Computing in Civil and Building Engineering; 巻数 279).

研究成果: Conference contribution

Design and implementation of distributed sensor network for intelligent space based on robot technology components

Sasaki, T. & Hashimoto, H., 2009, Proceedings - 2009 2nd Conference on Human System Interactions, HSI '09. p. 400-405 6 p. 5091013. (Proceedings - 2009 2nd Conference on Human System Interactions, HSI '09).

研究成果: Conference contribution

9 引用 (Scopus)

Design Development of the Support Tool to Prevent Secondary Accidents on Highway

Sato, K. & Yang, W., 2019 1 1, HCI International 2019 - Posters - 21st International Conference, HCII 2019, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 381-388 8 p. (Communications in Computer and Information Science; 巻数 1034).

研究成果: Conference contribution

Development of Air Hockey Robot improving with the human players - Arm control for effective quick draw taking an opponent-s eye movement into account-

Ogawa, M., Shimizu, S., Kadogawa, T., Hashizume, T., Kudoh, S., Suehiro, T., Sato, Y. & Ikeuchi, K., 2011, Proceedings: IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society. p. 3364-3369 6 p. 6119852. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

5 引用 (Scopus)

Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

Nishikawa, N., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2013 10 25, Advances in Abrasive Technology XVI. p. 293-298 6 p. (Advanced Materials Research; 巻数 797).

研究成果: Conference contribution

Development of Nonmechanical Zoom Lens System using Liquid Crystal

Hirai, H., Shimizu, S., Saito, T., Kurihara, H., Kawamura, M. & Sato, S., 2019 10, Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE Computer Society, p. 5370-5375 6 p. 8927481. (IECON Proceedings (Industrial Electronics Conference); 巻数 2019-October).

研究成果: Conference contribution

Development of Visual Remote Operation System for Low-Gravity Planet Rover

Shimizu, S., Takewaki, R., Murakami, R., Kameyama, N., Motoi, N., Yamazaki, T. & Hasebe, N., 2019 5 24, Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019. Institute of Electrical and Electronics Engineers Inc., p. 461-466 6 p. 8722907. (Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019).

研究成果: Conference contribution

Development of Wide Angle Fovea Lens for High-Definition Imager over 3 Mega Pixels

Shimizu, S., Murakami, R., Tominaga, M., Akamine, Y., Kawasaki, N., Shimomura, O., Ishimaru, K. & Mita, S., 2018 12 27, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 4232-4237 6 p. 8594194. (IEEE International Conference on Intelligent Robots and Systems).

研究成果: Conference contribution

1 引用 (Scopus)

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 12 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 巻 2017-January. p. 8273-8278 6 p.

研究成果: Conference contribution

Difference of sensitiveness toward information based on user-role

Choi, Y. & Yang, W., 2019 1 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (版). Springer Verlag, p. 318-325 8 p. (Advances in Intelligent Systems and Computing; 巻数 794).

研究成果: Conference contribution

Direct tilt angle control on inverted pendulum mobile robots

Shimizu, Y. & Shimada, A., 2010 6 25, AMC2010 - The 11th IEEE International Workshop on Advanced Motion Control, Proceedings. p. 234-239 6 p. 5463993. (International Workshop on Advanced Motion Control, AMC).

研究成果: Conference contribution

4 引用 (Scopus)

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 1 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (版). Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

1 引用 (Scopus)

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 1 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (版). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; 巻数 825 KEM).

研究成果: Conference contribution

Effects of visual elements into the touch interaction during the drag operation

Yang, W. S., Yusuke, S. & Ahrary, A., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. 6913282. (Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014).

研究成果: Conference contribution

Enhancement of spatial memory using human-object relations

Niitsuma, M., Sasaki, T. & Hashimoto, H., 2008, Proceedings of SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology. p. 3509-3513 5 p. 4655271. (Proceedings of the SICE Annual Conference).

研究成果: Conference contribution

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 6 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

研究成果: Conference contribution

3 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu, S., Naohiro, N. & Yasushi, I., 2015 1 1, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J-C., Hiroshi, U., Lee, S-W. & Fuh, Y-K. (版). Trans Tech Publications Ltd, p. 266-270 5 p. (Key Engineering Materials; 巻数 656-657).

研究成果: Conference contribution

1 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014 1 1, Advances in Abrasive Technology XVII. Yan, J., Aoyama, H. & Yui, A. (版). Trans Tech Publications Ltd, p. 267-272 6 p. (Advanced Materials Research; 巻数 1017).

研究成果: Conference contribution

1 引用 (Scopus)

Evaluation of machining accuracy by measurement of surface texture pattern

Tozawa, K., Toida, N., Kobayashi, Y. & Shirai, K., 2005 12 1, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005. (Proceedings of the 20th Annual ASPE Meeting, ASPE 2005).

研究成果: Conference contribution

2 引用 (Scopus)

Eye gaze estimation based on ellipse fitting and three-dimensional model of eye for 'Intelligent Poster'

Urano, R., Suzuki, R. & Sasaki, T., 2014 1 1, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 1157-1162 6 p. 6878237. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

4 引用 (Scopus)

Failure-atomic synchronization of memory mapped data in non-volatile memory based system

Haga, K. & Yamazaki, K., 2018 3 1, Proceedings - 12th SEATUC Symposium, SEATUC 2018. Institute of Electrical and Electronics Engineers Inc., 8788878. (Proceedings - 12th SEATUC Symposium, SEATUC 2018).

研究成果: Conference contribution

Generation of multi-level disparity map from stereo wide angle fovea vision system

Kameyama, N., Tominaga, M., Kawasaki, N., Shimizu, S., Shimomura, O., Ishimaru, K., Murakami, R., Akamine, Y. & Mita, S., 2018 12 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5451-5456 6 p. 8591128. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

研究成果: Conference contribution

1 引用 (Scopus)

Handwritten Cube Recognition and Evaluation Based on Perspectives for Sketch Training System

Kuribayashi, Y., Yamaga, E. & Sasaki, T., 2019 4 25, Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019. Institute of Electrical and Electronics Engineers Inc., p. 34-39 6 p. 8700369. (Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019).

研究成果: Conference contribution

1 引用 (Scopus)

Hierarchical framework for implementation of intelligent space

Sasaki, T. & Hashimoto, H., 2007, Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society, IECON. p. 28-33 6 p. 4460179. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

5 引用 (Scopus)

High speed machining: A review from a viewpoint of chip formation

Obikawa, T., Anzai, M., Egawa, T., Narutaki, N., Shintani, K. & Takeoka, E., 2011, High Speed Machining. p. 578-583 6 p. (Advanced Materials Research; 巻数 188).

研究成果: Conference contribution

9 引用 (Scopus)

Human observation based mobile robot navigation in intelligent space

Sasaki, T. & Hashimoto, H., 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2006. p. 1044-1049 6 p. 4058502. (IEEE International Conference on Intelligent Robots and Systems).

研究成果: Conference contribution

19 引用 (Scopus)

Humanoid climbing robot modeling in matlab-simechanics

Dung, N. A. & Shimada, A., 2013 12 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4162-4167 6 p. 6699803. (IECON Proceedings (Industrial Electronics Conference)).

研究成果: Conference contribution

4 引用 (Scopus)

Implementation of distributed sensor network for intelligent space

Sasaki, T., Brscic, D. & Hashimoto, H., 2007, Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007. 4280003. (Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007).

研究成果: Conference contribution

4 引用 (Scopus)

Implementation of mobile robot control in intelligent space

Brscic, D., Sasaki, T. & Hashimoto, H., 2006, 2006 SICE-ICASE International Joint Conference. p. 1228-1233 6 p. 4109151. (2006 SICE-ICASE International Joint Conference).

研究成果: Conference contribution

15 引用 (Scopus)

IoT-security approach analysis for the novel nutrition-based vegetable production and distribution system

Dennis, A. L. R., Ahrary, A., Horibe, N. & Yang, W. S., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 185-189 5 p. 6913291. (Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014).

研究成果: Conference contribution

4 引用 (Scopus)

Joint workshop of the 5th International Workshop on Model-Driven Approaches in Software Product Line Engineering and the 4th Workshop on Scalable Modeling Techniques for Software Product Lines (MAPLE/SCALE 2013)

Botterweck, G., Dhungana, D., Noda, N., Rabiser, R. & Washizaki, H., 2013 9 18, Proceedings of the 17th International Software Product Line Conference, SPLC 2013. 1 p. (ACM International Conference Proceeding Series).

研究成果: Conference contribution

Large area micro-texture imprinting onto metallic sheet via CNC stamping

Aizawa, T., Tamaki, M. & Fukuda, T., 2014, 11th International Conference on Technology of Plasticity, ICTP 2014. Elsevier Ltd, 巻 81. p. 1427-1432 6 p.

研究成果: Conference contribution

5 引用 (Scopus)

Machine vision system to induct binocular wide-angle foveated information into both the human and computers - Feature generation algorithm based on DFT for binocular fixation

Shimizu, S., Shimojo, S., Hao, J. & Burdick, J. W., 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation. p. 793-799 7 p. 1570214. (Proceedings - IEEE International Conference on Robotics and Automation; 巻数 2005).

研究成果: Conference contribution

4 引用 (Scopus)

Micro-texturing onto amorphous carbon materials as a mold-die for micro-forming

Aizawa, T., 2013 3 11, Micro Manufacturing Techniques and Applications. p. 23-37 15 p. (Applied Mechanics and Materials; 巻数 289).

研究成果: Conference contribution

9 引用 (Scopus)

Modeling and position control of mobile robot

Padhy, P. K., Sasaki, T., Nakamura, S. & Hashimoto, H., 2010, AMC2010 - The 11th IEEE International Workshop on Advanced Motion Control, Proceedings. p. 100-105 6 p. 5464018. (International Workshop on Advanced Motion Control, AMC).

研究成果: Conference contribution

22 引用 (Scopus)

Motion-controlled precise stamping for microtexturing onto aluminum sheet

Aizawa, T., Itoh, T., Tamaki, M. & Fukuda, T., 2014 1 1, Metal Forming 2014. Micari, F. & Fratini, L. (版). Trans Tech Publications Ltd, p. 64-71 8 p. (Key Engineering Materials; 巻数 622-623).

研究成果: Conference contribution

Multi-rate discrete control for omni-directional robot in intelligent space

Phaoharuhansa, D. & Shimada, A., 2014 10 23, Proceedings of the SICE Annual Conference. Society of Instrument and Control Engineers (SICE), p. 1867-1873 7 p. 6935307. (Proceedings of the SICE Annual Conference).

研究成果: Conference contribution

Non-verbal communication-based emotion incitation robot

Shimizu, S., Shimada, K. & Murakami, R., 2018 6 1, Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 338-341 4 p. (Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018).

研究成果: Conference contribution

Operation sound influence on tablet device character input operation

Yang, W., Kondo, H. & Seok, W. M., 2015, Communications in Computer and Information Science. Springer Verlag, 巻 529. p. 51-56 6 p. (Communications in Computer and Information Science; 巻数 529).

研究成果: Conference contribution

1 引用 (Scopus)

Parallelization of recursive preorder traversal based on building and winding call stacks

Nakayama, M., Yamazaki, K. & Tanaka, S., 2016 8 2, Proceedings - 2016 IEEE 30th International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2016. IEEE Computer Society, 巻 2016-August. p. 570-579 10 p. 7529916

研究成果: Conference contribution

Parallelization of tree-to-TLV serialization

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2015 1 20, 2014 IEEE 33rd International Performance Computing and Communications Conference, IPCCC 2014. Institute of Electrical and Electronics Engineers Inc., 巻 2014-January. 7017059

研究成果: Conference contribution

1 引用 (Scopus)

Phase shift pulse Brillouin optical time domain analysis (PSP-BOTDA) employing Dual Golay Codes

Bin Zan, M. S. D., Sasaki, T., Horiguchi, T. & Uchiyama, D., 2010 10 15, International Conference on Computer and Communication Engineering, ICCCE'10. 5556827. (International Conference on Computer and Communication Engineering, ICCCE'10).

研究成果: Conference contribution

2 引用 (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 8 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (版). EDP Sciences, 09002. (MATEC Web of Conferences; 巻数 21).

研究成果: Conference contribution

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 1 1, Technology of Plasticity. Wang, G-J., Fann, K-J., Hwang, Y-M. & Jiang, C-P. (版). Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

Position estimation based on the target shape information using laser range finders for Intelligent Space

Sasaki, T., Tamura, H., Hashimoto, H. & Inoue, F., 2010, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2010. p. 605-610 6 p. 5695943. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

研究成果: Conference contribution

1 引用 (Scopus)