デザイン工学科

研究成果

フィルター
Conference contribution
2019

A Prioritization Method for SPL Pairwise Testing Based on User Profiles

Akimoto, H., Isogami, Y., Kitamura, T., Noda, N. & Kishi, T., 2019 12, Proceedings - 2019 26th Asia-Pacific Software Engineering Conference, APSEC 2019. IEEE Computer Society, p. 118-125 8 p. 8945722. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; 巻数 2019-December).

研究成果: Conference contribution

Collaborative robots system in a photography service using Kukanchi

Nakai, T., Nakamura, Y., Sasaki, T. & Matsuhira, N., 2019 1 24, 2018 IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO 2018. IEEE Computer Society, p. 111-116 6 p. 8625761. (Proceedings of IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO; 巻数 2018-September).

研究成果: Conference contribution

Design Development of the Support Tool to Prevent Secondary Accidents on Highway

Sato, K. & Yang, W., 2019 1 1, HCI International 2019 - Posters - 21st International Conference, HCII 2019, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 381-388 8 p. (Communications in Computer and Information Science; 巻数 1034).

研究成果: Conference contribution

Development of Visual Remote Operation System for Low-Gravity Planet Rover

Shimizu, S., Takewaki, R., Murakami, R., Kameyama, N., Motoi, N., Yamazaki, T. & Hasebe, N., 2019 5 24, Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019. Institute of Electrical and Electronics Engineers Inc., p. 461-466 6 p. 8722907. (Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019).

研究成果: Conference contribution

Difference of sensitiveness toward information based on user-role

Choi, Y. & Yang, W., 2019 1 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (版). Springer Verlag, p. 318-325 8 p. (Advances in Intelligent Systems and Computing; 巻数 794).

研究成果: Conference contribution

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 1 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (版). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; 巻数 825 KEM).

研究成果: Conference contribution

Handwritten Cube Recognition and Evaluation Based on Perspectives for Sketch Training System

Kuribayashi, Y., Yamaga, E. & Sasaki, T., 2019 4 25, Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019. Institute of Electrical and Electronics Engineers Inc., p. 34-39 6 p. 8700369. (Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019).

研究成果: Conference contribution

The influence of the mechanism of the acoustic sound amplifier on sound transmission

Sato, K. & Yang, W., 2019 1 1, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2018 International Conference on Affective and Pleasurable Design, 2018. Fukuda, S. (版). Springer Verlag, p. 259-268 10 p. (Advances in Intelligent Systems and Computing; 巻数 774).

研究成果: Conference contribution

Usability and design guideline for designing single handle faucet’s and handle shape

Takagi, R., Hashida, N. & Takeuchi, H., 2019 1 1, Advances in Usability, User Experience and Assistive Technology - Proceedings of the AHFE 2018 International Conferences on Usability and User Experience and Human Factors and Assistive Technology, 2018. Falcao, C. & Ahram, T. Z. (版). Springer Verlag, p. 89-98 10 p. (Advances in Intelligent Systems and Computing; 巻数 794).

研究成果: Conference contribution

2018

Analysis of information provision methods for indoor navigation using interactive floor projection

Suyama, M., Hayashi, F. & Sasaki, T., 2018 2 1, SII 2017 - 2017 IEEE/SICE International Symposium on System Integration. Institute of Electrical and Electronics Engineers Inc., 巻 2018-January. p. 1010-1015 6 p.

研究成果: Conference contribution

An Attitude Control Considering Sideslip Phenomenon Using DOB-Based LMPC-LQR for Four-Wheel Steering Vehicle

Soubou, H., Ohhira, T. & Shimada, A., 2018 10 15, 2018 57th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2018. Institute of Electrical and Electronics Engineers Inc., p. 1544-1550 7 p. 8492534

研究成果: Conference contribution

Consistency of visual information in web design - Focusing on responsiveness of a university website

Matsuo, T., Yang, W. & Shibata, N., 2018, Advances in Communication of Design - Proceedings of the AHFE 2017 International Conference on Human Factors in Communication of Design. Springer Verlag, 巻 609. p. 132-140 9 p. (Advances in Intelligent Systems and Computing; 巻数 609).

研究成果: Conference contribution

Development of Wide Angle Fovea Lens for High-Definition Imager over 3 Mega Pixels

Shimizu, S., Murakami, R., Tominaga, M., Akamine, Y., Kawasaki, N., Shimomura, O., Ishimaru, K. & Mita, S., 2018 12 27, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 4232-4237 6 p. 8594194. (IEEE International Conference on Intelligent Robots and Systems).

研究成果: Conference contribution

1 引用 (Scopus)

Dry progressive stamping of copper-alloy snaps by the plasma nitrided punches

Aizawa, T. & Morita, H., 2018 1 1, Technology of Plasticity. Trans Tech Publications Ltd, p. 28-33 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

1 引用 (Scopus)

Failure-atomic synchronization of memory mapped data in non-volatile memory based system

Haga, K. & Yamazaki, K., 2018 3 1, Proceedings - 12th SEATUC Symposium, SEATUC 2018. Institute of Electrical and Electronics Engineers Inc., 8788878. (Proceedings - 12th SEATUC Symposium, SEATUC 2018).

研究成果: Conference contribution

Generation of multi-level disparity map from stereo wide angle fovea vision system

Kameyama, N., Tominaga, M., Kawasaki, N., Shimizu, S., Shimomura, O., Ishimaru, K., Murakami, R., Akamine, Y. & Mita, S., 2018 12 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5451-5456 6 p. 8591128. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

研究成果: Conference contribution

1 引用 (Scopus)

Non-verbal communication-based emotion incitation robot

Shimizu, S., Shimada, K. & Murakami, R., 2018 6 1, Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 338-341 4 p.

研究成果: Conference contribution

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 1 1, Technology of Plasticity. Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

Potentials of Galilean and Keplerian Liquid Crystal Zoom Lens System

Shimizu, S., Hirai, H., Kawamura, M. & Sato, S., 2018 10 17, Proceedings - 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, Mecatronics 2018. Institute of Electrical and Electronics Engineers Inc., p. 308-311 4 p. 8495813

研究成果: Conference contribution

Research for relief of discomfort of sound user interface (sui)

Yang, W., 2018 1 1, 15th International Design Conference, DESIGN 2018. Storga, M., Pavkovic, N., Bojcetic, N., Skec, S. & Marjanovic, D. (版). Faculty of Mechanical Engineering and Naval Architecture, 巻 3. p. 1489-1498 10 p.

研究成果: Conference contribution

Research on user-centered information design in SVOD service

Yang, W., Yahiro, S. & Sato, K., 2018 1 1, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 129-135 7 p. (Communications in Computer and Information Science; 巻数 850).

研究成果: Conference contribution

Robust Localization and Position Control for Mobile Robot Using EKF with Disturbance Estimation

Shimada, A., 2018 10 17, Proceedings - 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, Mecatronics 2018. Institute of Electrical and Electronics Engineers Inc., p. 312-315 4 p. 8495723

研究成果: Conference contribution

Saliency map for wide angle fovea vision sensor

Murakami, R., Shimizu, S., Hasebe, N. & Yamazaki, T., 2018 12 26, Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 5481-5486 6 p. 8591050. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

研究成果: Conference contribution

1 引用 (Scopus)

Study on UI of charger in EV charging station

Yang, W., Hirohashi, T. & Choi, Y., 2018 1 1, HCI International 2018 – Posters’ Extended Abstracts - 20th International Conference, HCI International 2018, Proceedings. Stephanidis, C. (版). Springer Verlag, p. 410-417 8 p. (Communications in Computer and Information Science; 巻数 852).

研究成果: Conference contribution

Vision System with High Performance Wide Angle Fovea Lens

Murakami, R., Shimizu, S. & Hasebe, N., 2018 10 22, Proceedings - 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation, ETFA 2018. Institute of Electrical and Electronics Engineers Inc., 巻 2018-September. p. 1229-1232 4 p. 8502661

研究成果: Conference contribution

2017

Development of wide angle fovea telescope with wide-field-of-view immersive eyepiece

Shimizu, S. & Hasebe, N., 2017 12 15, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., 巻 2017-January. p. 8273-8278 6 p.

研究成果: Conference contribution

Reimagining braga

Agirachman, F. A., Ozawa, Y., Indraprastha, A., Shinozaki, M., Sitompul, I. D. M., Nuraeni, R., Chirstanti, A. N., Putra, A. C. & Zefanya, T., 2017, CAADRIA 2017 - 22nd International Conference on Computer-Aided Architectural Design Research in Asia: Protocols, Flows and Glitches. The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), p. 23-32 10 p.

研究成果: Conference contribution

Research on lift assistance seat for elderly people—focusing on analysis of motion capture and EMG

Matsuo, T., Yamada, K., Yang, W. & Ahrary, A., 2017, Advances in Affective and Pleasurable Design - Proceedings of the AHFE International Conference on Affective and Pleasurable Design, 2016. Springer Verlag, 巻 483. p. 329-337 9 p. (Advances in Intelligent Systems and Computing; 巻数 483).

研究成果: Conference contribution

1 引用 (Scopus)

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Trans Tech Publications Ltd, 巻 749 KEM. p. 3-8 6 p. (Key Engineering Materials; 巻数 749 KEM).

研究成果: Conference contribution

System product line engineering for small appliances with driver derivation

Hosoai, S., Noda, N. & Kishi, T., 2017 3 30, Proceedings - 23rd Asia-Pacific Software Engineering Conference, APSEC 2016. IEEE Computer Society, p. 389-392 4 p. 7890619

研究成果: Conference contribution

2016

A collaborative task experiment by multiple robots in a human environment using the Kukanchi system

Fujimoto, K., Sasaki, T., Sugaya, M., Yoshimi, T., Mizukawa, M. & Matsuhira, N., 2016, Intelligent Robotics and Applications - 9th International Conference, ICIRA 2016, Proceedings. Springer Verlag, 巻 9835. p. 276-282 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); 巻数 9835).

研究成果: Conference contribution

Equilibrium state control for climbing robot

Shimada, A. & Dung, N. A., 2016 6 20, 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. Institute of Electrical and Electronics Engineers Inc., p. 455-460 6 p. 7496392

研究成果: Conference contribution

2 引用 (Scopus)

Parallelization of recursive preorder traversal based on building and winding call stacks

Nakayama, M., Yamazaki, K. & Tanaka, S., 2016 8 2, Proceedings - 2016 IEEE 30th International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2016. IEEE Computer Society, 巻 2016-August. p. 570-579 10 p. 7529916

研究成果: Conference contribution

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016, Advances in Abrasive Technology XIX. Trans Tech Publications Ltd, 巻 874. p. 439-444 6 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016, Advances in Abrasive Technology XIX. Trans Tech Publications Ltd, 巻 874. p. 445-449 5 p. (Materials Science Forum; 巻数 874).

研究成果: Conference contribution

1 引用 (Scopus)

Visualization of Activities-Related Information for Supporting Active Aged Persons

Yang, W., Kato, Y. & Wangmi, S., 2016 1 6, Proceedings - 2015 IIAI 4th International Congress on Advanced Applied Informatics, IIAI-AAI 2015. Institute of Electrical and Electronics Engineers Inc., p. 635-638 4 p. 7373983

研究成果: Conference contribution

2015

A path motion planning for humanoid climbing robot

Nguyen, D. & Shimada, A., 2015 1 8, Proceedings - 8th EUROSIM Congress on Modelling and Simulation, EUROSIM 2013. Institute of Electrical and Electronics Engineers Inc., p. 179-184 6 p. 7004939

研究成果: Conference contribution

1 引用 (Scopus)

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Sawa, T., Naohiro, N. & Yasushi, I., 2015, Key Engineering Materials. Trans Tech Publications Ltd, 巻 656-657. p. 266-270 5 p. (Key Engineering Materials; 巻数 656-657).

研究成果: Conference contribution

1 引用 (Scopus)

Operation sound influence on tablet device character input operation

Yang, W., Kondo, H. & Seok, W. M., 2015, Communications in Computer and Information Science. Springer Verlag, 巻 529. p. 51-56 6 p. (Communications in Computer and Information Science; 巻数 529).

研究成果: Conference contribution

1 引用 (Scopus)

Parallelization of tree-to-TLV serialization

Nakayama, M., Yamazaki, K., Tanaka, S. & Kasahara, H., 2015 1 20, 2014 IEEE 33rd International Performance Computing and Communications Conference, IPCCC 2014. Institute of Electrical and Electronics Engineers Inc., 巻 2014-January. 7017059

研究成果: Conference contribution

1 引用 (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 8 10, MATEC Web of Conferences. EDP Sciences, 巻 21. 09002

研究成果: Conference contribution

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 8 10, MATEC Web of Conferences. EDP Sciences, 巻 21. 08002

研究成果: Conference contribution

2014

Altitude control using limited pole placement on coaxial-helicopter

Sugawara, Y. & Shimada, A., 2014, International Workshop on Advanced Motion Control, AMC. Institute of Electrical and Electronics Engineers Inc., p. 506-511 6 p. 6823333

研究成果: Conference contribution

1 引用 (Scopus)

A path-planning algorithm for humanoid climbing robot using Kinect sensor

Dung, N. A. & Shimada, A., 2014 10 23, Proceedings of the SICE Annual Conference. Society of Instrument and Control Engineers (SICE), p. 1549-1554 6 p. 6935284

研究成果: Conference contribution

5 引用 (Scopus)

Effects of visual elements into the touch interaction during the drag operation

Yang, W., Yusuke, S. & Ahrary, A., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. 6913282

研究成果: Conference contribution

Evaluation of grinding performance by mechanical properties of super abrasive wheel - Relationship between modulus of rupture and critical grain holding power (2nd report)

Sawa, T., Nishikawa, N. & Ikuse, Y., 2014, Advanced Materials Research. Trans Tech Publications Ltd, 巻 1017. p. 267-272 6 p. (Advanced Materials Research; 巻数 1017).

研究成果: Conference contribution

1 引用 (Scopus)

Eye gaze estimation based on ellipse fitting and three-dimensional model of eye for 'Intelligent Poster'

Urano, R., Suzuki, R. & Sasaki, T., 2014, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM. Institute of Electrical and Electronics Engineers Inc., p. 1157-1162 6 p. 6878237

研究成果: Conference contribution

4 引用 (Scopus)

IoT-security approach analysis for the novel nutrition-based vegetable production and distribution system

Dennis, A. L. R., Ahrary, A., Horibe, N. & Yang, W., 2014 9 29, Proceedings - 2014 IIAI 3rd International Conference on Advanced Applied Informatics, IIAI-AAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 185-189 5 p. 6913291

研究成果: Conference contribution

3 引用 (Scopus)

Large area micro-texture imprinting onto metallic sheet via CNC stamping

Aizawa, T., Tamaki, M. & Fukuda, T., 2014, 11th International Conference on Technology of Plasticity, ICTP 2014. Elsevier Ltd, 巻 81. p. 1427-1432 6 p.

研究成果: Conference contribution

4 引用 (Scopus)

Motion-controlled precise stamping for microtexturing onto aluminum sheet

Aizawa, T., Itoh, T., Tamaki, M. & Fukuda, T., 2014, Key Engineering Materials. Trans Tech Publications Ltd, 巻 622-623. p. 64-71 8 p. (Key Engineering Materials; 巻数 622-623).

研究成果: Conference contribution