デザイン工学科

研究成果

フィルター
Article
2020

Material deformation behavior in t-shape hydroforming of metal microtubes

Yasui, H., Yoshihara, S., Mori, S., Tada, K. & Manabe, K. I., 2020 2, : : Metals. 10, 2, 199.

研究成果: Article

公開
2019

Biodegradable and hollowed micro-scaffolds for improved modular assembly-based tissue engineering: Design, 3D fabrication, and feasibility in randomly packed perfusion culture

Pang, Y., Sutoko, S., Horimoto, Y., Weng, D., Montagne, K., Komori, K., Takano, K., Shirakashi, R., Anzai, M., Niino, T. & Sakai, Y., 2019 9 15, : : Biochemical Engineering Journal. 149, 107239.

研究成果: Article

2 引用 (Scopus)

Grain size effect on the nitrogen super-saturation process into AISI316 at 623 K

Aizawa, T., Yoshino, T., Shiratori, T. & Yoshihara, S. I., 2019 1 1, : : ISIJ International. 59, 10, p. 1886-1892 7 p.

研究成果: Article

公開

Microstructure of plasma nitrided AISI420 martensitic stainless steel at 673 K

Aizawa, T., Yoshino, T., Morikawa, K. & Yoshihara, S., 2019 2 1, : : Crystals. 9, 2, 60.

研究成果: Article

公開
2 引用 (Scopus)
公開
1 引用 (Scopus)
2018

A DLC-punch array to fabricate the micro-textured aluminum sheet for boiling heat transfer control

Aizawa, T., Wasa, K. & Tamagaki, H., 2018 3 25, : : Micromachines. 9, 4, 147.

研究成果: Article

3 引用 (Scopus)

Fabrication of micro diamond- like Carbon-Nozzles by plasma oxidation printing

Aizawa, T., Tamagaki, H. & Wasa, K., 2018 6 1, : : Journal of Micro and Nano-Manufacturing. 6, 2, 021007.

研究成果: Article

1 引用 (Scopus)
1 引用 (Scopus)
2017
2 引用 (Scopus)
3 引用 (Scopus)

Fine piercing of electromagnetic steel sheets by the plasma-nitrided tools

Aizawa, T., Ktasuta, E., Shiratori, T. & Dohda, K., 2017 1 1, : : Procedia Engineering. 207, p. 1027-1032 6 p.

研究成果: Article

1 引用 (Scopus)
3 引用 (Scopus)
4 引用 (Scopus)
11 引用 (Scopus)

Plasma Polishing and Finishing of CVD-Diamond Coated WC (Co) Dies for Dry Stamping

Yunata, E. E., Aizawa, T., Tamaoki, K. & Kasugi, M., 2017 1 1, : : Procedia Engineering. 207, p. 2197-2202 6 p.

研究成果: Article

3 引用 (Scopus)
1 引用 (Scopus)

松下幸之助のデザイン観と真野善一の苦悩

Masunari, K., 2017 3 15, : : INDUSTRIAL ART NEWS. No.49, p. 9-16 8 p.

研究成果: Article

2016
5 引用 (Scopus)

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

Aizawa, T., Fukuda, T. & Morita, H., 2016, : : Manufacturing Review. 3, 2016004.

研究成果: Article

4 引用 (Scopus)

Micro-grooving into thick CVD diamond films via hollow-cathode oxygen plasma etching

Yunata, E. E. & Aizawa, T., 2016 4 1, : : Manufacturing Letters. 8, p. 16-20 5 p.

研究成果: Article

6 引用 (Scopus)

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y., 2016 8 30, : : Biofabrication. 8, 3, 035016.

研究成果: Article

7 引用 (Scopus)
2 引用 (Scopus)
2015
1 引用 (Scopus)

Experimental validation of blimp movement control against wind

Morikawa, K. & Shimada, A., 2015 5 1, : : IEEJ Transactions on Industry Applications. 135, 5, p. 488-493 6 p.

研究成果: Article

2 引用 (Scopus)
6 引用 (Scopus)

Plasma assisted nitriding for micro-texturing onto martensitic stainless steels ∗

Katoh, T., Aizawa, T. & Yamaguchi, T., 2015, : : Manufacturing Review. 2, 2015004.

研究成果: Article

5 引用 (Scopus)
8 引用 (Scopus)
2014

Complete ashing of used DLC coating for reuse of the end-milling tools

Aizawa, T., Masaki, E. & Sugita, Y., 2014 1, : : Manufacturing Letters. 2, 1, p. 1-3 3 p.

研究成果: Article

5 引用 (Scopus)

Development of electric rust preventive machining method system-safe water using for machining fluid: Complete removal of bacteria (Legionella pneumophila) and assay

Nishikawa, N., Omoe, K., Murakami, K., Sato'o, Y., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., Mizuno, M. & Tsukamoto, S., 2014, : : International Journal of Nanomanufacturing. 10, 1-2, p. 185-200 16 p.

研究成果: Article

Frictional properties of diamond-like carbon coated tool in dry intermittent machining of aluminum alloy 5052

Yokota, T., Sawa, T., Yokouchi, M., Tozawa, K., Anzai, M. & Aizawa, T., 2014 4, : : Precision Engineering. 38, 2, p. 365-370 6 p.

研究成果: Article

12 引用 (Scopus)
6 引用 (Scopus)

Variability modeling methods for software product line development

Noda, N. & Kishi, T., 2014 12 14, : : Computer Software. 31, 4, p. 66-76 11 p.

研究成果: Article

Wind-disturbance-based control approach for blimp robots

Furukawa, H. & Shimada, A., 2014 2, : : Electronics and Communications in Japan. 97, 2, p. 549-555 7 p.

研究成果: Article

3 引用 (Scopus)

Computing level of privacy in a virtual environment

Indraprastha, A. & Shinozaki, M., 2013 3 1, : : International Journal of Architectural Computing. 11, 1, p. 65-86 22 p.

研究成果: Article

6 引用 (Scopus)

Modelling and simulation of robotic systems using sysml

Rahman, M. A. A., Mizukawa, M., Phaoharuhansa, D. & Shimada, A., 2013, : : International Journal of Modelling and Simulation. 33, 3, p. 152-161 10 p.

研究成果: Article

5 引用 (Scopus)
28 引用 (Scopus)

Oxygen plasma etching of diamond-like carbon coated mold-die for micro-texturing

Aizawa, T. & Fukuda, T., 2013 1 25, : : Surface and Coatings Technology. 215, p. 364-368 5 p.

研究成果: Article

13 引用 (Scopus)