年別の研究成果
年別の研究成果
検索結果
-
Article
Development of Articulated Manipulators with Pneumatic Cylinders
Kawakami, Y., Ito, K., Ogawa, M., Horikawa, A., Shioda, K. & Nagai, K., 2011 7月, In: International Journal of Automation Technology. 5, 4, p. 478-484 7 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Displacement control of flexible pneumatic cylinder using disturbance observer and smith compensator
Kobayashi, W., Dohta, S., Akagi, T., Miyamoto, Y., Kato, N. & Ito, K., 2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 594-599 6 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Effect of electrostatic charged state on die-wall lubrication for powder metallurgy
Adachi, K. & Fujiki, A., 2016 3月 1, In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 63, 3, p. 93-100 8 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Effect of toe length on biped walking behavior
Nguyen, V. T. & Hasegawa, H., 2018 11月 1, In: International Journal of Mechanical Engineering and Robotics Research. 7, 6, p. 599-603 5 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Effect of voluntary participation on an alternating and a simultaneous prisoner's dilemma
Yamamoto, H., Okada, I., Taguchi, T. & Muto, M., 2019 9月 11, In: Physical Review E. 100, 3, 032304.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Elucidation of the interaction between flavan-3-ols and bovine serum albumin and its effect on their in-vitro cytotoxicity
Fujii, Y., Suhara, Y., Sukikara, Y., Teshima, T., Hirota, Y., Yoshimura, K. & Osakabe, N., 2019 10月 11, In: Molecules. 24, 20, 3667.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Energy efficiency improvement of water hydraulic fluid switching transmission
Pham, P. N., Ito, K. & Ikeo, S., 2014 9月 1, In: International Journal of Automation Technology. 8, 5, p. 733-744 12 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Energy-saving technology for water hydraulic motor system (first report: Simulation result)
Pham, P. N. & Ito, K., 2016, In: Journal of Advanced Mechanical Design, Systems and Manufacturing. 10, 4研究成果: Article › 査読
3 被引用数 (Scopus) -
Entanglement extracted from vacuum into accelerated Unruh-DeWitt detectors and energy conservation
Koga, J. I., Maeda, K. & Kimura, G., 2019 9月 23, In: Physical Review D. 100, 6, 065013.研究成果: Article › 査読
6 被引用数 (Scopus) -
Entropies in general probabilistic theories and their application to the Holevo bound
Kimura, G., Ishiguro, J. & Fukui, M., 2016 10月 17, In: Physical Review A. 94, 4, 042113.研究成果: Article › 査読
7 被引用数 (Scopus) -
Estimation of resistance force at steady-state sinkage for cylindrical wheel-typed lunar/planetary exploration rovers with function of push–pull locomotion
Fujiwara, D., Tsujikawa, N., Oshima, T. & Iizuka, K., 2020 12月 1, In: ROBOMECH Journal. 7, 1, 38.研究成果: Article › 査読
Open Access -
Experimental attempts to investigate the influence of petrographic properties on drying characteristics of lignite in superheated steam atmosphere
Sciazko, A., Komatsu, Y., Zakrzewski, M., Akiyama, T., Hashimoto, A., Shikazono, N., Kaneko, S., Kimijima, S., Szmyd, J. S. & Kobayashi, Y., 2016, In: Energies. 9, 5, 371.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Experimental modeling of pressure in the hydrostatic formation of a cylindrical cup with different materials
Le, T. K., Nguyen, T. T. & Bui, N. T., 2021 7月 1, In: Applied Sciences (Switzerland). 11, 13, 5814.研究成果: Article › 査読
Open Access -
Expert system based on integrated fuzzy AHP for automatic cutting tool selection
Phung, X. L., Truong, H. S. & Bui, N. T., 2019 10月 1, In: Applied Sciences (Switzerland). 9, 20, 4308.研究成果: Article › 査読
Open Access6 被引用数 (Scopus) -
Flower-like BiVO4 microspheres and their visible light-driven photocatalytic activity
Zulkifili, A. N., Fujiki, A. & Kimijima, S., 2018 1月 31, In: Applied Sciences (Switzerland). 8, 2, 216.研究成果: Article › 査読
14 被引用数 (Scopus) -
Gait-behavior optimization considering arm swing and toe mechanism for biped walking on rough road
Nguyen, V. T., Bui, N. T. & Hasegawa, H., 2020, In: International Journal of Mechanical Engineering and Robotics Research. 9, 4, p. 521-527 7 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
General object detection method by on-board computer vision with Artificial Neural Networks
Varagul, J. & Ito, T., 2017, In: International Journal of Automotive Engineering. 8, 4, p. 149-156 8 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Global ray-casting range image registration
Tao, L., Bui, T. & Hasegawa, H., 2017 12月 1, In: IPSJ Transactions on Computer Vision and Applications. 9, 1, 14.研究成果: Article › 査読
Open Access7 被引用数 (Scopus) -
Hydrogel Microellipsoids that Form Robust String-Like Assemblies at the Air/Water Interface
Honda, K., Sazuka, Y., Iizuka, K., Matsui, S., Uchihashi, T., Kureha, T., Shibayama, M., Watanabe, T. & Suzuki, D., 2019 5月 27, In: Angewandte Chemie - International Edition. 58, 22, p. 7294-7298 5 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
Influence of geological variations on lignite drying kinetics in superheated steam atmosphere for belchatow deposit located in the central Poland
Sciazko, A., Komatsu, Y., Zakrzewski, M., Akiyama, T., Hashimoto, A., Shikazono, N., Kaneko, S., Kimijima, S., Szmyd, J. S. & Kobayashi, Y., 2016, In: Thermal Science. 20, 4, p. 1185-1198 14 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Influence of lubricant on nonlinear vibration characteristics of linear rolling guideway
Sakai, Y. & Tanaka, T., 2020 4月, In: Tribology International. 144, 106124.研究成果: Article › 査読
Open Access7 被引用数 (Scopus) -
Interaction effect between hull and accommodation on wind drag acting on a container ship
He, N. V., Hien, N. V., Truong, V. T. & Bui, N. T., 2020 11月, In: Journal of Marine Science and Engineering. 8, 11, p. 1-18 18 p., 930.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Investigation of accumulator parameters for a novel hybrid architecture
Hijikata, S., Ito, K. & Murrenhoff, H., 2020, In: Journal of Robotics and Mechatronics. 32, 5, p. 876-884 9 p.研究成果: Article › 査読
-
Investigation of tensile-compressive poof strength of representative PM steels for automotive applications
Yoshida, A. & Fujiki, A., 2012 5月, In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 59, 5, p. 254-257 4 p.研究成果: Article › 査読
-
Lightweight Bus Body Design and Optimization for Rollover Crashworthiness
Kongwat, S., Jongpradist, P. & Hasegawa, H., 2020 8月 1, In: International Journal of Automotive Technology. 21, 4, p. 981-991 11 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
MCAs in Arabidopsis are Ca2+-permeable mechanosensitive channels inherently sensitive to membrane tension
Yoshimura, K., Iida, K. & Iida, H., 2021 12月 1, In: Nature Communications. 12, 1, 6074.研究成果: Article › 査読
Open Access7 被引用数 (Scopus) -
Measuring the normal stress distribution acting on a locked-wheel of push–pull locomotion rovers via a wheel sensor system
Fujiwara, D., Oshima, T. & Iizuka, K., 2020 8月 2, In: Sensors (Switzerland). 20, 16, p. 1-22 22 p., 4434.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Microstructure and strength of Fe-2%Cu-0.8%C sintered steel using Fe-Cu alloy powder
Iwaoka, T. & Fujiki, A., 2014 6月 1, In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 61, 6, p. 290-297 8 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Microstructure evaluation and thermal–mechanical properties of abs matrix composite filament reinforced with multi-walled carbon nanotubes by a single screw extruder for fdm 3d printing
Le, T. H., Le, V. S., Dang, Q. K., Nguyen, M. T., Le, T. K. & Bui, N. T., 2021 10月 1, In: Applied Sciences (Switzerland). 11, 19, 8798.研究成果: Article › 査読
Open Access -
New weight filtering factor of nonlinear design for topology optimization under cyclic loading based on proportional technique
Kongwat, S. & Hasegawa, H., 2020 4月 1, In: Journal of Mechanical Science and Technology. 34, 4, p. 1635-1644 10 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Novel integration of capp in a g-code generation module using macro programming for CNC application
Nguyen, T. K., Phung, L. X. & Bui, N. T., 2020, In: Machines. 8, 4, p. 1-16 16 p., 61.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Novel laser melting stir process for microwelding
Sakai, Y., Ichikawa, W. & Tanaka, T., 2020 8月, In: Manufacturing Letters. 25, p. 6-9 4 p.研究成果: Article › 査読
Open Access -
Novel non-traditional mechanical drilling process with squeeze motion
Sakai, Y., Kinouchi, R., Toki, Y. & Tanaka, T., 2021 4月 15, In: Materials Letters. 289, 129444.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Numerical analysis of single and multiple particles of Belchatow lignite dried in superheated steam
Zakrzewski, M., Sciazko, A., Komatsu, Y., Akiyama, T., Hashimoto, A., Kaneko, S., Kimijima, S., Szmyd, J. S. & Kobayashi, Y., 2018 8月 1, In: Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2215-2230 16 p.研究成果: Article › 査読
Open Access9 被引用数 (Scopus) -
Numerical analysis on dynamic behavior of solid oxide fuel cell with power output control scheme
Komatsu, Y., Kimijima, S. & Szmyd, J. S., 2013 2月 1, In: Journal of Power Sources. 223, p. 232-245 14 p.研究成果: Article › 査読
29 被引用数 (Scopus) -
On affine maps on non-compact convex sets and some characterizations of finite-dimensional solid ellipsoids
Kimura, G. & Nuida, K., 2014 12月, In: Journal of Geometry and Physics. 86, p. 1-18 18 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Opposition-based learning for self-adaptive control parameters in differential evolution for optimal mechanism design
Bui, T., Nguyen, T. & Hasegawa, H., 2019, In: Journal of Advanced Mechanical Design, Systems and Manufacturing. 13, 4研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Performance analysis for the part-load operation of a solid oxide fuel cell-micro gas turbine hybrid system
Komatsu, Y., Kimijima, S. & Szmyd, J. S., 2010 2月, In: Energy. 35, 2, p. 982-988 7 p.研究成果: Article › 査読
76 被引用数 (Scopus) -
Performance analysis of integrated coal gasification fuel cell combined power generation system
Nii, R., Komatsu, Y. & Kimijima, S., 2013, In: ECS Transactions. 57, 1, p. 3049-3058 10 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Performance analysis of the SOFC-MGT hybrid system with gasified biomass fuel
Sucipta, M., Kimijima, S. & Suzuki, K., 2007 11月 22, In: Journal of Power Sources. 174, 1, p. 124-135 12 p.研究成果: Article › 査読
72 被引用数 (Scopus) -
Performance evaluation of micro gas turbine-solid oxide fuel cell hybrid system under part-load conditions
Kimijima, S. & Kasagi, N., 2004 4月, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 70, 692, p. 1020-1027 8 p.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Position control of flexible pneumatic cylinder using tiny embedded controller with disturbance observer
Kobayashi, W., Kato, N., Dohta, S., Akagi, T. & Itoc, K., 2017 7月 1, In: International Journal of Mechanical Engineering and Robotics Research. 6, 4, p. 318-321 4 p.研究成果: Article › 査読
4 被引用数 (Scopus) -
Possibility of a minimal purity-measurement scheme critically depends on the parity of dimension of the quantum system
Tanaka, T., Kimura, G. & Nakazato, H., 2013 1月 3, In: Physical Review A - Atomic, Molecular, and Optical Physics. 87, 1, 012303.研究成果: Article › 査読
14 被引用数 (Scopus) -
Predicting traffic congestion using driver behavior
Ito, T. & Kaneyasu, R., 2017 1月 1, In: Procedia Computer Science. 112, p. 1288-1297 10 p.研究成果: Article › 査読
7 被引用数 (Scopus) -
Quantum teleportation in vacuum using only Unruh-DeWitt detectors
Koga, J. I., Kimura, G. & Maeda, K., 2018 6月 26, In: Physical Review A. 97, 6, 062338.研究成果: Article › 査読
12 被引用数 (Scopus) -
Responses to transient receptor potential (TRP) channel agonists in Chlamydomonas reinhardtii
Wada, M., Kaizuka, I. & Yoshimura, K., 2020 7月, In: Biology Open. 9, 7, bio053140.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Simple adaptive air-fuel ratio control of a port injection SI engine with a cylinder pressure sensor
Khajorntraidet, C. & Ito, K., 2015 5月 22, In: Control Theory and Technology. 13, 2, p. 141-150 10 p.研究成果: Article › 査読
15 被引用数 (Scopus) -
Simulation of Detecting Function object for AGV Using Computer Vision with Neural Network
Varagul, J. & Ito, T., 2016, In: Unknown Journal. 96, p. 159-168 10 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
Single-Master Dual-Slave Surgical Robot with Automated Relay of Suture Needle
Watanabe, K., Kanno, T., Ito, K. & Kawashima, K., 2018 8月, In: IEEE Transactions on Industrial Electronics. 65, 8, p. 6343-6351 9 p.研究成果: Article › 査読
23 被引用数 (Scopus) -
Solid oxide fuel cell-micro gas turbine hybrid system using natural gas mixed with biomass gasified fuel
Sucipta, M., Kimijima, S. & Suzuki, K., 2008 1月 29, In: Journal of the Electrochemical Society. 155, 3, p. B258-B263研究成果: Article › 査読
14 被引用数 (Scopus)