機械工学科

Article

Exchange of Heat Radiation between Human Body and Urban Environment: Characterization in Visible, Near-Infrared, and Far-Infrared Regions

Kono, T., Naruse, Y., Yamada, J. & Rajagopalan, U. M., 2022 10月, In: Applied Sciences (Switzerland). 12, 20, 10412.

研究成果: Article › 査読

Open Access

Experimental evaluation of optimization method for developing ultraviolet barrier coatings

Gonome, H., Okajima, J., Komiya, A. & Maruyama, S., 2014 1月, In: Journal of Quantitative Spectroscopy and Radiative Transfer. 133, p. 454-463 10 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Experimental-numerical hybrid stress analysis for a curving crack in a thin glass plate under thermal load

Yoneyama, S. & Sakaue, K., 2014 11月 1, In: Engineering Fracture Mechanics. 131, p. 514-524 11 p.

研究成果: Article › 査読

7 被引用数 (Scopus)

Experimental study of hydrogen storage with reaction heat recovery using metal hydride in a totalized hydrogen energy utilization system

Tange, M., Maeda, T., Nakano, A., Ito, H., Kawakami, Y., Masuda, M. & Takahashi, T., 2011 9月, In: International Journal of Hydrogen Energy. 36, 18, p. 11767-11776 10 p.

研究成果: Article › 査読

37 被引用数 (Scopus)

Extinction and flame front behavior of ultra lean premixed flame formed in opposite flow

Yahagi, Y. & Nihei, H., 2002 4月, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 68, 668, p. 1287-1294 8 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Fabrication and compression properties of functionally graded foam with uniform pore structures consisting of dissimilar A1050 and A6061 aluminum alloys

Hangai, Y., Saito, K., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2014 9月 8, In: Materials Science and Engineering A. 613, p. 163-170 8 p.

研究成果: Article › 査読

52 被引用数 (Scopus)

Fabrication and tensile property of sandwich panel with ADC12 foam core by friction stir processing route

Utsunomiya, T., Ishii, N., Hangai, Y., Koyama, S., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2013 9月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 9, p. 385-390 6 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Fabrication and tensile tests of aluminum foam sandwich with dense steel face sheets by friction stir processing route

Hangai, Y., Ishii, N., Koyama, S., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2012, In: Materials Transactions. 53, 4, p. 584-587 4 p.

研究成果: Article › 査読

23 被引用数 (Scopus)

Fabrication of A1050-A6061 functionally graded aluminum foam by friction stir processing route

Hangai, Y., Oba, Y., Koyama, S. & Utsunomiya, T., 2011 12月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42, 12, p. 3585-3589 5 p.

研究成果: Article › 査読

28 被引用数 (Scopus)

Fabrication of ADC12 porous aluminum with graded porosities and pore structures

Utsunomiya, T., Takahashi, K., Kato, H., Hangai, Y., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2012, In: Keikinzoku/Journal of Japan Institute of Light Metals. 62, 7, p. 278-284 7 p.

研究成果: Article › 査読

Fabrication of Al foam with harmonic structure by Cu addition using sintering and dissolution process

Hangai, Y., Morita, T. & Utsunomiya, T., 2018 11月 1, In: Materials Letters. 230, p. 120-122 3 p.

研究成果: Article › 査読

7 被引用数 (Scopus)

Fabrication of aluminum foam/dense steel composite by friction stir welding

Hangai, Y., Koyama, S., Hasegawa, M. & Utsunomiya, T., 2010 9月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41, 9, p. 2184-2186 3 p.

研究成果: Article › 査読

28 被引用数 (Scopus)

Fabrication of Aluminum Foam/Dense Steel Compsite by Friction Stir Welding

HANGAI, Y., KOYAMA, S., HASEGAWA, M. & UTSUNOMIYA, T., 2010 9月 1, In: METLLURGICAL AND MATERIALS TRANSACTIONS A. 41, p. 2184-2186

研究成果: Article › 査読

Fabrication of aluminum foam core sandwich using sandwich-type foamable precursor with two face sheets by friction stir welding route

Utsunomiya, T., Otsuki, K. & Hangai, Y., 2018, In: Materials Transactions. 59, 6, p. 999-1004 6 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Fabrication of aluminum foam-filled thin-wall steel tube by friction welding and its compression properties

Hangai, Y., Saito, M., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2014, In: Materials. 6, 9, p. 6796-6810 15 p.

研究成果: Article › 査読

24 被引用数 (Scopus)

Fabrication of aluminum foam with complex shapes using pin screen mold and effect of arrangement of pins on its surface morphology

Hangai, Y., Takahashi, K., Nagahiro, R., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2020 4月 1, In: Journal of Porous Materials. 27, 2, p. 347-353 7 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Fabrication of bilayer tube consisting of outer aluminum foam tube and inner dense aluminum tube by friction stir back extrusion

Hangai, Y., Otazawa, S., Utsunomiya, T., Suzuki, R., Koyama, S., Matsubara, M. & Yoshikawa, N., 2018 6月, In: Materials Today Communications. 15, p. 36-42 7 p.

研究成果: Article › 査読

6 被引用数 (Scopus)

Fabrication of composite structural material with ADC12 porous aluminum and dense steel by friction stir welding route

Hangai, Y., Ishii, N., Koyama, S., Utsunomiya, T. & Kitahara, S., 2012 5月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 76, 5, p. 349-354 6 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Fabrication of functionally graded aluminum foam by friction stir processing route (invited lecture)

Hangai, Y., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2012 11月 30, In: The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2012). Volume 2, p. 9-10

研究成果: Article › 査読

Fabrication of functionally graded aluminum foam using aluminum alloy die castings by friction stir processing

Hangai, Y., Takahashi, K., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2012 2月 1, In: Materials Science and Engineering A. 534, p. 716-719 4 p.

研究成果: Article › 査読

95 被引用数 (Scopus)

Fabrication of functionally graded porous aluminum of three layer structure fabricated by different aluminum alloys

Saito, K., Hangai, Y., Utsunomiya, T., Kuwazuru, O., Yoshikawa, N. & Kitahara, S., 2013, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 79, 804, p. 1088-1092 5 p.

研究成果: Article › 査読

Fabrication of Porous Akuminum by Friction Stir Processing Precursor Method and its Mechanical Properties

Hangai, Y., Kuwazuru, O., Koyama, S., Hasegawa, M., Utsunomiya, T. & Yoshikawa, N., 2010 9月 7, In: Proceedngs of the 12th International Conference on Aluminum Alloys. p. 2341-2344

研究成果: Article › 査読

Fabrication of Porous Aliminum Using Gases Intrinsically Contained in Aluminum Alloy Die Castings

HANGAI, Y. & UTSUNOMIYA, T., 2009 6月 1, In: Metallurgical and Materials Transactions A. 40, p. 1284-1287

研究成果: Article › 査読

Fabrication of porous aluminum by friction stir processing

Hangai, Y. & Utsunomiya, T., 2009 1月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 40, 2, p. 275-277 3 p.

研究成果: Article › 査読

65 被引用数 (Scopus)

Fabrication of porous aluminum using gases intrinsically contained in aluminum alloy die castings

Hangai, Y. & Utsunomiya, T., 2009 4月 23, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 40, 6, p. 1284-1287 4 p.

研究成果: Article › 査読

19 被引用数 (Scopus)

Fabrication of two layers porous aluminum varying porosity by friction powder sintering process and its compression properties

Hangai, Y., Ishihara, A., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2016, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 80, 6, p. 390-393 4 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Fabrication of various types of ADC12 aluminum alloy die castings containing different amount of gases and porous aluminum fabricated by friction stir processing

Hangai, Y., Kato, H., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2010 9月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 74, 9, p. 592-597 6 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Falling behavior and control effect on temperature rise under heating condition concerning water film flow on steel shutter surface

Ohmiya, Y., Tange, M., Nakamura, K. & Miyazawa, Y., 2020, In: Journal of Environmental Engineering. 85, 768, p. 97-105 9 p.

研究成果: Article › 査読

Fatigue Behavior of High-Pressure Die Cast Aluminum Alloy

KUWAZURU, O., MURATA, Y., HANGAI, Y., UTSUNOMIYA, T., KITAHARA, S. & YOSHIKAWA, N., 2008 3月 10, In: 2008 Ｍ＆Ｍ International Symposium for Young Researchers, Materials & Mechanics Division, Japan Society of Mechanical Engineers (MMD-JSME). p. 165-172

研究成果: Article › 査読

Fatigue strength reduction factor of crack initiation life basis for austenitic stainless steel

Utsunomiya, T., Kinoshita, D., Hirai, T. & Iida, K., 1999 9月, In: Zairyo/Journal of the Society of Materials Science, Japan. 48, 9, p. 1035-1040 6 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Flame structure of lean premixed and diffusion combined flames near extinction limit

Kawanami, T. & Yahagi, Y., 2012, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 78, 789, p. 1118-1126 9 p.

研究成果: Article › 査読

Flow structure and flame stability in a micro can combustor with a baffle plate

Yahagi, Y., Sekiguti, M. & Suzuki, K., 2007 3月, In: Applied Thermal Engineering. 27, 4, p. 788-794 7 p.

研究成果: Article › 査読

29 被引用数 (Scopus)

Foaming behavior of aluminum foam precursor induced by friction heat generated by rotating tool used for spot friction stir welding

Hangai, Y., Takada, K., Endoh, R., Koyama, S. & Utsunomiya, T., 2017 1月 1, In: Journal of Manufacturing Processes. 25, p. 426-431 6 p.

研究成果: Article › 査読

7 被引用数 (Scopus)

Foaming behavior of aluminum foam precursor using only friction heat of rotating tool

Hangai, Y., Morita, T. & Utsunomiya, T., 2016, In: Materials Transactions. 57, 6, p. 1014-1016 3 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

Foaming behavior of blowing- and stabilization-agent-free aluminum foam precursor during spot friction stir welding

Hangai, Y., Takada, K., Fujii, H., Aoki, Y. & Utsunomiya, T., 2019 3月, In: Journal of Materials Processing Technology. 265, p. 185-190 6 p.

研究成果: Article › 査読

7 被引用数 (Scopus)

Foaming behavior of porous aluminum consisting of dissimilar aluminum alloy by optical heating

Nagai, T., Hangai, Y., Ohashi, M., Utsunomiya, T. & Yoshikawa, N., 2020 11月 1, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 84, 11, p. 360-363 4 p.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Foaming conditions of porous aluminum in fabrication of ADC12 aluminum alloy die castings by friction stir processing

Hangai, Y., Ozeki, Y. & Utsunomiya, T., 2009 9月, In: Materials Transactions. 50, 9, p. 2154-2159 6 p.

研究成果: Article › 査読

31 被引用数 (Scopus)

Foaming of A1050 aluminum precursor by generated frictional heat during friction stir processing of steel plate

Hangai, Y., Takada, K., Fujii, H., Aoki, Y., Aihara, Y., Nagahiro, R., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2020 2月 1, In: International Journal of Advanced Manufacturing Technology. 106, 7-8, p. 3131-3137 7 p.

研究成果: Article › 査読

7 被引用数 (Scopus)

Foaming of aluminum foam precursor during friction stir welding

Hangai, Y., Takada, K., Endo, R., Fujii, H., Aoki, Y. & Utsunomiya, T., 2018 9月, In: Journal of Materials Processing Technology. 259, p. 109-115 7 p.

研究成果: Article › 査読

14 被引用数 (Scopus)

Football pass network based on the measurement of player position by using network theory and clustering

Kawasaki, T., Sakaue, K., Matsubara, R. & Ishizaki, S., 2019 5月 4, In: International Journal of Performance Analysis in Sport. 19, 3, p. 381-392 12 p.

研究成果: Article › 査読

7 被引用数 (Scopus)

Foot posture alteration and recovery following a full marathon run

Fukano, M., Inami, T., Nakagawa, K., Narita, T. & Iso, S., 2018 11月 26, In: European Journal of Sport Science. 18, 10, p. 1338-1345 8 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

Formation of Secondary Organized Aerosol from VOCs in Indoor Environment

Hara, T., Namiki, N., Nishimura, N., Sekiguchi, K., Kagi, N., aAzuma, K., Suwa, Y., Tamura, H. & Fujii, S., 2010 10月 1, In: International Symposium on Contamination Control 2010 Proceedings. p. 471-476

研究成果: Article › 査読

Forming Condition of Porous Aluminum in Fabrication of ADC12 Aluminum Alloy Die Castings by Friction Stir Processing

HANGAI, Y., Ozeki, Y. & UTSUNOMIYA, T., 2009 9月 1, In: Materials Transactions. 50, p. 2154-2159

研究成果: Article › 査読

Forming of aluminum foam using light-transmitting material as die during foaming by optical heating

Hangai, Y., Amagai, K., Tsurumi, N., Omachi, K., Shimizu, K., Akimoto, K., Utsunomiya, T. & Yoshikawa, N., 2018, In: Materials Transactions. 59, 11, p. 1854-1859 6 p.

研究成果: Article › 査読