機械工学科

Article

Brittle-ductile fracture transition on a crack in a weld line between two different steels

Utsunomiya, T., Tanaka, T., Watanabe, K. & Ohira, T., 2004 4月, In: Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 70, 4, p. 620-627 8 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Cancer cell separator using size-dependent filtration in microfluidic chip

Masuda, T., Niimi, M., Nakanishi, H., Yamanishi, Y. & Arai, F., 2013, In: Sensors and Actuators, B: Chemical. 185, p. 245-251 7 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

CFD Benchmark Tests for Indoor Environmental Problems: Part 1, Isothermal/Non-Isothermal Flow in 2D and 3D Room Model

Ito, K., Inthavong, K., Kurabuchi, T., Ueda, T., Endo, T., Omori, T., Ono, H., Kato, S., Sakai, K., Suwa, Y., Matsumoto, H., Yoshino, H., Zhang, W. & Tu, J., 2015, In: International Journal of Architectural Engineering Technology. 2, 1, p. 1-22

研究成果: Article › 査読

CFD Benchmark Tests for Indoor Environmental Problems: Part 2, Cross-Ventilation Airflows and Floor Heating Systems

Ito, K., Inthavong, K., Kurabuchi, T., Ueda, T., Endo, T., Omori, T., Ono, H., Kato, S., Sakai, K., Suwa, Y., Matsumoto, H., Yoshino, H., Zhang, W. & Tu, J., 2015, In: International Journal of Architectural Engineering Technology. 2, 1, p. 23-49

研究成果: Article › 査読

CFD Benchmark Tests for Indoor Environmental Problems: Part 3, Numerical Thermal Manikins

Ito, K., Inthavong, K., Kurabuchi, T., Ueda, T., Endo, T., Omori, T., Ono, H., Kato, S., Sakai, K., Suwa, Y., Matsumoto, H., Yoshino, H., Zhang, W. & Tu, J., 2015, In: International Journal of Architectural Engineering Technology. 2, 1, p. 50-75

研究成果: Article › 査読

CFD Benchmark Tests for Indoor Environmental Problems: Part 4, Air-conditioning Airflows, Residential Kitchen Airflows and Fire-Induced Flow

Ito, K., Inthavong, K., Kurabuchi, T., Ueda, T., Endo, T., Omori, T., Ono, H., Kato, S., Sakai, K., Suwa, Y., Matsumoto, H., Yoshino, H., Zhang, W. & Tu, J., 2015, In: International Journal of Architectural Engineering Technology. 2, 1, p. 76-102

研究成果: Article › 査読

Characterization of Ultrafine Particle Generation from Laser Printers using Different Types of Chambers

Namiki, N., Kagi, N., Nishimura, N., Sekiguchi, K., aAzuma, K., Tamura, H., Suwa, Y. & Fujii, S., 2010 10月 1, In: International Symposium on Contamination Control 2010. p. 394-398

研究成果: Article › 査読

Clustered shrinkage pores in ill-conditioned aluminum alloy die castings

Hangai, Y., Kuwazuru, O., Yano, T., Utsunomiya, T., Murata, Y., Kitahara, S., Bidhar, S. & Yoshikawa, N., 2010 9月, In: Materials Transactions. 51, 9, p. 1574-1580 7 p.

研究成果: Article › 査読

12 被引用数 (Scopus)

Collision analysis between granular materials and elastic plate

Orii, Y., Ishigaki, S., Tsugihashi, K., Masuda, K. & Saeki, M., 2012, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 78, 789, p. 1542-1552 11 p.

研究成果: Article › 査読

Communication: Effect of the amount of gases on the foaming efficiency of porous aluminum using die castings fabricated by friction stir processing

Hangai, Y., Kato, H., Utsunomiya, T. & Kitahara, S., 2010 8月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41, 8, p. 1883-1886 4 p.

研究成果: Article › 査読

12 被引用数 (Scopus)

Compensation of the model error in the communication disturbance observer on the time-delay system

Uematsu, N., Natori, K. & Uchimura, Y., 2015 5月 1, In: IEEJ Transactions on Industry Applications. 135, 5, p. 494-502 9 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Compression properties of Al/Al-Mg-Si/Al-Si-Cu alloy Three-Layered functionally graded aluminum foam

Saito, K., Hangai, Y., Utsunomiya, T., Kuwazuru, O., Kitahara, S. & Yoshikawa, N., 2013 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 10, p. 430-434 5 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Compression properties of Al/Al-Si-Cu alloy functionally graded aluminum foam fabricated by friction stir processing route

Hangai, Y., Saito, K., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2013, In: Materials Transactions. 54, 3, p. 405-408 4 p.

研究成果: Article › 査読

22 被引用数 (Scopus)

Compression properties of three-layered functionally graded ADC12 aluminum foam fabricated by friction stir welding

Hangai, Y., Kamada, H., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2013, In: Materials Transactions. 54, 8, p. 1268-1273 6 p.

研究成果: Article › 査読

10 被引用数 (Scopus)

Compressive properties of porous aluminum fabricated by friction stir processing route without the use of blowing agent using aluminum alloy die castings

Hangai, Y., Kato, H., Utsunomiya, T. & Kitahara, S., 2010 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 74, 10, p. 697-699 3 p.

研究成果: Article › 査読

Open Access

6 被引用数 (Scopus)

Contactless magnetic gear for robot control application

Komiyama, H. & Uchimura, Y., 2012, In: IEEJ Transactions on Industry Applications. 132, 3, p. 389-396 8 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Contactless magnetic gear for robot control application

Komiyama, H. & Uchimura, Y., 2013 9月 1, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 184, 4, p. 32-41 10 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Contact prediction control for a teleoperation system with time delay

Norizuki, H. & Uchimura, Y., 2017, In: IEEJ Transactions on Industry Applications. 137, 7, p. 561-567 7 p.

研究成果: Article › 査読

Contact prediction control for a teleoperation system with time delay

Norizuki, H. & Uchimura, Y., 2018 1月 1, In: IEEJ Journal of Industry Applications. 7, 1, p. 102-108 7 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

Continuous foaming of multiple aluminum foam precursors by combining conveyor and optical heating

Hangai, Y., Ohashi, M., Nagahiro, R., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2020 8月, In: Materials Transactions. 61, 8, p. 1703-1706 4 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Continuous production of dissimilar alloy porous aluminum by conveyor with optical heating

Ohashi, M., Hangai, Y., Mitsugi, H., Amagai, K. & Utsunomiya, T., 2021 4月 15, In: Keikinzoku/Journal of Japan Institute of Light Metals. 71, 4, p. 177-179 3 p.

研究成果: Article › 査読

Open Access

Controlling the radiative properties of cool black-color coatings pigmented with CuO submicron particles

Gonome, H., Baneshi, M., Okajima, J., Komiya, A. & Maruyama, S., 2014 1月, In: Journal of Quantitative Spectroscopy and Radiative Transfer. 132, p. 90-98 9 p.

研究成果: Article › 査読

39 被引用数 (Scopus)

Control methods for tele-haptics

Uchimura, Y. & Natori, K., 2013, In: Journal of the Institute of Electrical Engineers of Japan. 133, 5, p. 278-281 4 p.

研究成果: Article › 査読

Control of autonomous mobile robot using map matching with optimized search range

Komiya, K., Miyashita, S., Maruoka, Y. & Uchimura, Y., 2013, In: IEEJ Transactions on Industry Applications. 133, 5, p. 502-509 8 p.

研究成果: Article › 査読

Control of autonomous mobile robot using map matching with optimized search range

Komiya, K., Miyashita, S., Maruoka, Y. & Uchimura, Y., 2015 3月 1, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 190, 4, p. 66-75 10 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Control of deformation behavior of aluminum foam-filled tube by introducing slit on pipe

Hangai, Y., Nakano, Y., Utsunomiya, T., Kuwazuru, O., Kitahara, S. & Yoshikawa, N., 2016, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 80, 11, p. 707-712 6 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Control of thermal barrier performance by optimized nanoparticle size and experimental evaluation using a solar simulator

Gonome, H., Baneshi, M., Okajima, J., Komiya, A., Yamada, N. & Maruyama, S., 2014 12月, In: Journal of Quantitative Spectroscopy and Radiative Transfer. 149, p. 81-89 9 p.

研究成果: Article › 査読

15 被引用数 (Scopus)

Control system design considering packet loss and variable time delay in a network-based system

Suhara, T., Norizuki, H. & Uchimura, Y., 2017, In: IEEJ Transactions on Industry Applications. 137, 2, p. 87-94 8 p.

研究成果: Article › 査読

Cyclic disturbance suppression control for harmonic magnetic gear

Uchimura, Y. & Saito, Y., 2014, In: IEEJ Transactions on Industry Applications. 134, 3, p. 284-292 9 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Damade and Permeability Evolution in CFRP Cross-Ply Laminates

KUMAZAWA, H., HAYASHI, H., SUSUKI, I. & UTSUNOMIYA, T., 2005 7月 12, In: ICCM-15, Durbun.

研究成果: Article › 査読

Damage and permeability evolution in CFRP cross-ply laminates

Kumazawa, H., Hayashi, H., Susuki, I. & Utsunomiya, T., 2006 10月, In: Composite Structures. 76, 1-2, p. 73-81 9 p.

研究成果: Article › 査読

19 被引用数 (Scopus)

Deformation and plateau region of functionally graded aluminum foam by amount combinations of added blowing agent

Hangai, Y., Utsunomiya, T., Kuwazuru, O., Kitahara, S. & Yoshikawa, N., 2015, In: Materials. 8, 10, p. 7161-7168 8 p.

研究成果: Article › 査読

5 被引用数 (Scopus)

Deformation behavior estimation of aluminum foam by X-ray CT image-based finite element analysis

Hangai, Y., Yamaguchi, R., Takahashi, S., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2013 4月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 4, p. 1880-1886 7 p.

研究成果: Article › 査読

25 被引用数 (Scopus)

Demonstration of laser biospeckle method for speedy in vivo evaluation of plant-sound interactions with arugula

Rajagopalan, U. M., Wakumoto, R., Endo, D., Hirai, M., Kono, T., Gonome, H., Kadono, H. & Yamada, J., 2021 10月, In: PLoS ONE. 16, 10 October, e0258973.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Dependence of fracture mode of a crack in a weld line between different steels on yield stress ratio

Utsunomiya, T., Tahara, K., Tanaka, T., Watanabe, K. & Ohika, T., 2001, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 67, 664, p. 2002-2009 8 p.

研究成果: Article › 査読

Open Access

Deployment control of wireless multihop-relay mobile robots based on voronoi partition

Imaizumi, T., Murakami, H. & Uchimura, Y., 2013 9月, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 184, 4, p. 42-51 10 p.

研究成果: Article › 査読

5 被引用数 (Scopus)

Deployment control of wireless multi-hop-relay mobile robots based on voronoi partition

Imaizumi, T., Murakami, H. & Uchimura, Y., 2012, In: IEEJ Transactions on Industry Applications. 132, 3, p. 381-388 8 p.

研究成果: Article › 査読

Detecting Overload from Strain Information during Fatigue Crack Propagation under Negative Stress Ratio

Makabe, C., Purnowidodo, A., Sueyoshi, T. & Utsunomiya, T., 2004 1月, In: Journal of Testing and Evaluation. 32, 1, p. 56-61 6 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Detection of fatigue crack initiation and growth behavior in a double notched specimen based on strain information

Utsunomiya, T., Ishii, H., Makabe, C. & Iida, K., 2000, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 66, 645, p. 915-922 8 p.

研究成果: Article › 査読

Open Access

Development of an Autonomous Mobile Robot with Self-Localization and Searching Target in a real Environment

Nomatsu, M., Suganuma, Y., Yui, Y. & Uchimura, Y., 2015, In: Journal of Robotics and Mechatronics. 27, 4, p. 356-364 9 p.

研究成果: Article › 査読

Open Access

7 被引用数 (Scopus)

Development of a simplified prediction model for indoor thermal environments in atriums with openings

Suwa, Y., Fujii, S. & Yuasa, K., 1996, In: Journal of Environmental Engineering (Japan). 481, p. 17-26

研究成果: Article › 査読

Development of a strain sensor using an oscillator circuit

Kanda, A., Utsunomiya, T. & Saitoh, A., 2014 9月 1, In: Transactions of the Japan Society for Aeronautical and Space Sciences. 57, 5, p. 272-278 7 p.

研究成果: Article › 査読

Development of a time-synchronized wireless sensor network

Uchimura, Y., Takahashi, M. & Nasu, T., 2010 12月, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 173, 4, p. 46-53 8 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Development of electrostatic separator of foreign objects in dried foods

Suzuki, M., Iwase, S., Koike, Y. & Saeki, M., 2017 3月, In: Japan Journal of Food Engineering. 18, 1, p. 61-69 9 p.

研究成果: Article › 査読

Development of electrostatic separator using cylindrical electrodes

Saeki, M., 2011, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 77, 780, p. 2953-2961 9 p.

研究成果: Article › 査読

Open Access

Development of time synchronized wireless sensor network

Uchimura, Y., Takahashi, M. & Nasu, T., 2008, In: IEEJ Transactions on Electronics, Information and Systems. 128, 10, p. 1528-1534+3

研究成果: Article › 査読

Dielectric spectroscopy of a thin surface layer by differential time-domain reflectometry using a coplanar waveguide circuit line probe

Shirakashi, R., Ogawa, T. & Yamada, J., 2013 2月, In: Measurement Science and Technology. 24, 2, 025501.

研究成果: Article › 査読

1 被引用数 (Scopus)

Drop Weight Impact Behavior of Al-Si-Cu Alloy Foam-Filled Thin-Walled Steel Pipe Fabricated by Friction Stir Back Extrusion

Hangai, Y., Nakano, Y., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2017 2月 1, In: Journal of Materials Engineering and Performance. 26, 2, p. 894-900 7 p.

研究成果: Article › 査読

16 被引用数 (Scopus)

Drop weight impact behavior of functionally graded aluminum foam consisting of A1050 and A6061 aluminum alloys

Hangai, Y., Kubota, N., Utsunomiya, T., Kawashima, H., Kuwazuru, O. & Yoshikawa, N., 2015, In: Materials Science and Engineering A. 639, p. 597-603 7 p.

研究成果: Article › 査読

35 被引用数 (Scopus)

Dynamic compression properties of porous aluminum with functionally graded pore structures

Hangai, Y., Suto, S., Utsunomiya, T., Kawashima, H., Kuwazuru, O. & Yoshikawa, N., 2017, In: Keikinzoku/Journal of Japan Institute of Light Metals. 67, 11, p. 576-581 6 p.

研究成果: Article › 査読

機械工学科

研究成果

検索結果