機械工学科

Article

Fatigue Behavior of High-Pressure Die Cast Aluminum Alloy

KUWAZURU, O., MURATA, Y., HANGAI, Y., UTSUNOMIYA, T., KITAHARA, S. & YOSHIKAWA, N., 2008 3月 10, In: 2008 Ｍ＆Ｍ International Symposium for Young Researchers, Materials & Mechanics Division, Japan Society of Mechanical Engineers (MMD-JSME). p. 165-172

研究成果: Article › 査読

Fatigue strength reduction factor of crack initiation life basis for austenitic stainless steel

Utsunomiya, T., Kinoshita, D., Hirai, T. & Iida, K., 1999 9月, In: Zairyo/Journal of the Society of Materials Science, Japan. 48, 9, p. 1035-1040 6 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Flame structure of lean premixed and diffusion combined flames near extinction limit

Kawanami, T. & Yahagi, Y., 2012, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 78, 789, p. 1118-1126 9 p.

研究成果: Article › 査読

Flow structure and flame stability in a micro can combustor with a baffle plate

Yahagi, Y., Sekiguti, M. & Suzuki, K., 2007 3月, In: Applied Thermal Engineering. 27, 4, p. 788-794 7 p.

研究成果: Article › 査読

26 被引用数 (Scopus)

Foaming behavior of aluminum foam precursor induced by friction heat generated by rotating tool used for spot friction stir welding

Hangai, Y., Takada, K., Endoh, R., Koyama, S. & Utsunomiya, T., 2017 1月 1, In: Journal of Manufacturing Processes. 25, p. 426-431 6 p.

研究成果: Article › 査読

5 被引用数 (Scopus)

Foaming behavior of aluminum foam precursor using only friction heat of rotating tool

Hangai, Y., Morita, T. & Utsunomiya, T., 2016, In: Materials Transactions. 57, 6, p. 1014-1016 3 p.

研究成果: Article › 査読

6 被引用数 (Scopus)

Foaming behavior of blowing- and stabilization-agent-free aluminum foam precursor during spot friction stir welding

Hangai, Y., Takada, K., Fujii, H., Aoki, Y. & Utsunomiya, T., 2019 3月, In: Journal of Materials Processing Technology. 265, p. 185-190 6 p.

研究成果: Article › 査読

5 被引用数 (Scopus)

Foaming behavior of porous aluminum consisting of dissimilar aluminum alloy by optical heating

Nagai, T., Hangai, Y., Ohashi, M., Utsunomiya, T. & Yoshikawa, N., 2020 11月 1, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 84, 11, p. 360-363 4 p.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Foaming conditions of porous aluminum in fabrication of ADC12 aluminum alloy die castings by friction stir processing

Hangai, Y., Ozeki, Y. & Utsunomiya, T., 2009 9月, In: Materials Transactions. 50, 9, p. 2154-2159 6 p.

研究成果: Article › 査読

27 被引用数 (Scopus)

Foaming of A1050 aluminum precursor by generated frictional heat during friction stir processing of steel plate

Hangai, Y., Takada, K., Fujii, H., Aoki, Y., Aihara, Y., Nagahiro, R., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2020 2月 1, In: International Journal of Advanced Manufacturing Technology. 106, 7-8, p. 3131-3137 7 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Foaming of aluminum foam precursor during friction stir welding

Hangai, Y., Takada, K., Endo, R., Fujii, H., Aoki, Y. & Utsunomiya, T., 2018 9月, In: Journal of Materials Processing Technology. 259, p. 109-115 7 p.

研究成果: Article › 査読

10 被引用数 (Scopus)

Football pass network based on the measurement of player position by using network theory and clustering

Kawasaki, T., Sakaue, K., Matsubara, R. & Ishizaki, S., 2019 5月 4, In: International Journal of Performance Analysis in Sport. 19, 3, p. 381-392 12 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Foot posture alteration and recovery following a full marathon run

Fukano, M., Inami, T., Nakagawa, K., Narita, T. & Iso, S., 2018 11月 26, In: European Journal of Sport Science. 18, 10, p. 1338-1345 8 p.

研究成果: Article › 査読

6 被引用数 (Scopus)

Formation of Secondary Organized Aerosol from VOCs in Indoor Environment

Hara, T., Namiki, N., Nishimura, N., Sekiguchi, K., Kagi, N., aAzuma, K., Suwa, Y., Tamura, H. & Fujii, S., 2010 10月 1, In: International Symposium on Contamination Control 2010 Proceedings. p. 471-476

研究成果: Article › 査読

Forming Condition of Porous Aluminum in Fabrication of ADC12 Aluminum Alloy Die Castings by Friction Stir Processing

HANGAI, Y., Ozeki, Y. & UTSUNOMIYA, T., 2009 9月 1, In: Materials Transactions. 50, p. 2154-2159

研究成果: Article › 査読

Forming of aluminum foam using light-transmitting material as die during foaming by optical heating

Hangai, Y., Amagai, K., Tsurumi, N., Omachi, K., Shimizu, K., Akimoto, K., Utsunomiya, T. & Yoshikawa, N., 2018, In: Materials Transactions. 59, 11, p. 1854-1859 6 p.

研究成果: Article › 査読

16 被引用数 (Scopus)

Forming of aluminum foam using steel mesh as die during foaming of precursor by optical heating

Hangai, Y., Amagai, K., Omachi, K., Tsurumi, N., Utsunomiya, T. & Yoshikawa, N., 2018 12月, In: Optics and Laser Technology. 108, p. 496-501 6 p.

研究成果: Article › 査読

23 被引用数 (Scopus)

Formulation of non-linear viscoelastic–viscoplastic constitutive equation for polyamide 6 resin

Koyanagi, J., Hasegawa, K., Ohtani, A., Sakai, T. & Sakaue, K., 2021 2月, In: Heliyon. 7, 2, e06335.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Fracture Criterion of Elastic-Plastic Crack under Mixed Mode Condition Based on CED (Crack Energy Density)

UTSUNOMIYA, T. & WATANABE, K., 1991 8月 20, In: Transactions of the 11th International Conference on SMiRT. G1, p. 77-82

研究成果: Article › 査読

Fracture Mode and Fracture Criterion of an Elastic-Plastic Mixed-Mode Crack

UTSUNOMIYA, T., 1995 1月 1, In: Default journal. p. 69-82

研究成果: Article › 査読

Fracture Parameter of a Crack in a Fusion Line between Two Diferent Materials

UTSUNOMIYA, T., OKUTAMA, M., KUWAZURU, O. & WATANABE, K., 1996 7月 24, In: Default journal. p. 185-190

研究成果: Article › 査読

Fretting fatigue properties and detection of crack initiation of inconel alloy

Utsunomiya, T., Sugimoto, K., Makabe, C. & Iida, K., 2001 7月, In: Zairyo/Journal of the Society of Materials Science, Japan. 50, 7, p. 758-763 6 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Frictional energy analysis of a vane-type air pump for assisting paper handling via air flow in offset printing machines

T.Ueki, T. U., K.Inaba, K. I., J.Shibata, J. S. & Ueki, T., 2005 11月 1, In: The 6th JFPS International Symposium on Fluid Power. p. 534-539

研究成果: Article › 査読

Functionally graded aluminum foam consisting of dissimilar aluminum alloys fabricated by sintering and dissolution process

Hangai, Y., Morita, T. & Utsunomiya, T., 2017 6月 1, In: Materials Science and Engineering A. 696, p. 544-551 8 p.

研究成果: Article › 査読

31 被引用数 (Scopus)

Fundamental melting process of water-insoluble phase change material immersed in water

Kawanami, T., Hirai, R., Shirai, K. & Hirasawa, S., 2017 1月 1, In: Journal of Thermal Science and Technology. 12, 2, 17-00348.

研究成果: Article › 査読

1 被引用数 (Scopus)

Gas flow characteristics in the model channel of a disk shape planar-type SOFC

Tsunoda, K., Kurihara, M. & Mukai, Y., 2007 12月, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 73, 12, p. 2425-2432 8 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Growth behavior of a crack parallel to a weld line between two different steels (effect of crack position on fracture mode)

Utsunomiya, T., Oku, H., Watanabe, K. & Ohira, T., 2000, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 66, 644, p. 822-829 8 p.

研究成果: Article › 査読

Open Access

High cycle fatigue strength of 2.25Cr-1Mo steel under repeated two-step variable amplitude loading

Nakazawa, T., Ogawa, T. & Sakaue, K., 2011, In: Zairyo/Journal of the Society of Materials Science, Japan. 60, 10, p. 885-889 5 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

High-enthalpy extraction experiments with disk MHD generators

Tsunoda, K., Kariya, K., Suekane, T., Yamasaki, H., Okamura, T., Harada, N., Yoshikawa, K., Kabashima, S. & Shioda, S., 1995, In: JSME International Journal, Series B: Fluids and Thermal Engineering. 38, 2, p. 265-272 8 p.

研究成果: Article › 査読

Open Access

High fidelity simulation of low velocity impact behavior of CFRP laminate

Ebina, M., Yoshimura, A., Sakaue, K. & Waas, A. M., 2018 10月, In: Composites Part A: Applied Science and Manufacturing. 113, p. 166-179 14 p.

研究成果: Article › 査読

27 被引用数 (Scopus)

High-spatial-frequency periodic surface structures on steel substrate induced by subnanosecond laser pulses

Hikage, H., Nosaka, N. & Matsuo, S., 2017 11月, In: Applied Physics Express. 10, 11, 112701.

研究成果: Article › 査読

7 被引用数 (Scopus)

IEEE 802.11-based wireless sensor system for vibration measurement

Uchimura, Y., Nasu, T. & Takahashi, M., 2010, In: Advances in Civil Engineering. 2010, 631939.

研究成果: Article › 査読

3 被引用数 (Scopus)

Image-based finite element analysis of porous aluminum and its accuracy examination

Kuwazuru, O., Utsunomiya, T., Hangai, Y. & Myojo, T., 2014, In: Keikinzoku/Journal of Japan Institute of Light Metals. 64, 11, p. 551-556 6 p.

研究成果: Article › 査読

Improvement of the performance of a supersonic nozzle by riblets

Tsunoda, K., Suzuki, T. & Asai, T., 2000 9月, In: Journal of Fluids Engineering, Transactions of the ASME. 122, 3, p. 585-591 7 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

Increase in foot arch asymmetry after full marathon completion

Fukano, M., Nakagawa, K., Inami, T., Higashihara, A., Iizuka, S., Narita, T., Maemichi, T., yoshimura, A., Yamaguchi, S. & Iso, S., 2021, In: Journal of Sports Sciences. 39, 21, p. 2468-2474 7 p.

研究成果: Article › 査読

Inhibition of aor leakage of aliminium alloy die casting by compression process for porosity reduction

Hangai, Y., Kato, Y., Kitahara, S. & Utsunomiya, T., 2009 6月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 6, p. 310-311 2 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Integrated on-chip 3D vascular network culture under hypoxia

Olmedo-Suárez, M. Á., Sekiguchi, T., Takano, A., Cañizares-Macías, M. D. P. & Futai, N., 2020 5月 1, In: Micromachines. 11, 5, 475.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Investigation of dynamic characteristics of rolling particle dampers

Kuriyama, T. & Saeki, M., 2021 10月, In: JVC/Journal of Vibration and Control. 27, 19-20, p. 2243-2252 10 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Investigation of dynamics simulation of granular particles using spherocylinder model

Kidokoro, T., Arai, R. & Saeki, M., 2015 9月 24, (Accepted/In press) In: Granular Matter.

研究成果: Article › 査読

10 被引用数 (Scopus)

In Vivo Measurement of Optical Properties of Human Skin for 450–800 nm and 950–1600 nm Wavelengths

Kono, T. & Yamada, J., 2019 5月 1, In: International Journal of Thermophysics. 40, 5, 51.

研究成果: Article › 査読

Open Access

11 被引用数 (Scopus)

Jointing of porous aluminum by press forming of multiple precursors during foaming process

Ohashi, M., Hangai, Y., Amagai, K., Matsubara, M., Suzuki, R., Utsunomiya, T. & Yoshikawa, N., 2021, In: Keikinzoku/Journal of Japan Institute of Light Metals. 70, 11, p. 517-522 6 p.

研究成果: Article › 査読

Open Access