機械工学科

Article

Increase in foot arch asymmetry after full marathon completion

Fukano, M., Nakagawa, K., Inami, T., Higashihara, A., Iizuka, S., Narita, T., Maemichi, T., yoshimura, A., Yamaguchi, S. & Iso, S., 2021, In: Journal of Sports Sciences. 39, 21, p. 2468-2474 7 p.

研究成果: Article › 査読

Inhibition of aor leakage of aliminium alloy die casting by compression process for porosity reduction

Hangai, Y., Kato, Y., Kitahara, S. & Utsunomiya, T., 2009 6月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 6, p. 310-311 2 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Integrated on-chip 3D vascular network culture under hypoxia

Olmedo-Suárez, M. Á., Sekiguchi, T., Takano, A., Cañizares-Macías, M. D. P. & Futai, N., 2020 5月 1, In: Micromachines. 11, 5, 475.

研究成果: Article › 査読

Open Access

3 被引用数 (Scopus)

Investigation of dynamic characteristics of rolling particle dampers

Kuriyama, T. & Saeki, M., 2021 10月, In: JVC/Journal of Vibration and Control. 27, 19-20, p. 2243-2252 10 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Investigation of dynamics simulation of granular particles using spherocylinder model

Kidokoro, T., Arai, R. & Saeki, M., 2015 9月 24, (Accepted/In press) In: Granular Matter.

研究成果: Article › 査読

11 被引用数 (Scopus)

In Vivo Measurement of Optical Properties of Human Skin for 450–800 nm and 950–1600 nm Wavelengths

Kono, T. & Yamada, J., 2019 5月 1, In: International Journal of Thermophysics. 40, 5, 51.

研究成果: Article › 査読

Open Access

19 被引用数 (Scopus)

Jointing of porous aluminum by press forming of multiple precursors during foaming process

Ohashi, M., Hangai, Y., Amagai, K., Matsubara, M., Suzuki, R., Utsunomiya, T. & Yoshikawa, N., 2021, In: Keikinzoku/Journal of Japan Institute of Light Metals. 70, 11, p. 517-522 6 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Landscape planning based on EBPM: Location prioritization of green space management

Lim, H., Niwa, Y. & Tange, M., 2021 6月, In: Regional Science Policy and Practice. 13, 3, p. 708-728 21 p.

研究成果: Article › 査読

Laser Fabrication of Miniature Internal Thread in Glass Substrate

Degawa, H., Urano, N. & Matsuo, S., 2017 2月 8, In: Micromachines. 8, 2, 6 p., 48.

研究成果: Article › 査読

Open Access

7 被引用数 (Scopus)

Laser speckle imaging in discrimination of zooplanktons from supermicroplastics

Endo, D., Kono, T., Koike, Y., Yamada, J. & Maheswari Rajagopalan, U., 2021 12月, In: Environmental Nanotechnology, Monitoring and Management. 16, 100587.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Less impact absorption at the ankle joint is related to the single-leg landing stability deficit in patients with chronic ankle instability

Mineta, S., Fukano, M. & Hirose, N., 2023 3月, In: Journal of Biomechanics. 149, 111509.

研究成果: Article › 査読

Lighting system bioinspired by Haworthia obtusa

Gonome, H., Watanabe, K., Nakamura, K., Kono, T. & Yamada, J., 2020 12月 1, In: Scientific Reports. 10, 1, 11246.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Local Ablation by a Microelectric Knife: Enucleation of an Oocyte

Yamanishi, Y., Kuriki, H., Sakuma, S., Onda, K. & Arai, F., 2012 6月 12, In: IEEE Nanotechnology Magazine. 6, 2, p. 20-25 6 p.

研究成果: Article › 査読

6 被引用数 (Scopus)

Local ablation of a single cell using micro/nano bubbles

Kuriki, H., Yamanishi, Y., Sakuma, S., Akagi, S. & Arai, F., 2013 6月, In: Journal of Robotics and Mechatronics. 25, 3, p. 476-483 8 p.

研究成果: Article › 査読

Open Access

9 被引用数 (Scopus)

Manufacture of porous aluminum by utilizing friction stir processing

Hangai, Y. & Utsunomiya, T., 2009 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 73, 2, p. 131-133 3 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Manufacture of porous aluminum using containing gases inside aluminum alloy die castings

Hangai, Y. & Utsunomiya, T., 2009 6月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 73, 6, p. 484-486 3 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Manufacturing of composite structural material with porous aluminum/dense steel via friction stir welding route

Hangai, Y., Koyama, S., Utsunomiya, T. & Hasegawa, M., 2010 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 74, 2, p. 131-133 3 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Manufacturing of functionally graded porous aluminum of dissimilar aluminum alloy

Hangai, Y., Koyama, S., Utsunomiya, T. & Hasegawa, M., 2010 4月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 74, 4, p. 285-287 3 p.

研究成果: Article › 査読

Open Access

4 被引用数 (Scopus)

Manufacturing of porous aluminum component by using die

Utsunomiya, T., Tsukada, A. & Hangai, Y., 2011, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 77, 779, p. 1017-1020 4 p.

研究成果: Article › 査読

Manufacturing of sandwich panel with porous aluminum/dense steel plate by friction stir processing route

Utsunomiya, T., Ishii, N., Hangai, Y., Koyama, S., Hasegawa, M., Kuwazuru, O. & Yoshikawa, N., 2011, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 77, 779, p. 1013-1016 4 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Measurement of the Water Relaxation Time of ε -Polylysine Aqueous Solutions

Shirakashi, R., Amano, Y. & Yamada, J., 2017 5月 1, In: International Journal of Thermophysics. 38, 5, 75.

研究成果: Article › 査読

3 被引用数 (Scopus)

Microfluidic device capable of medium recirculation for non-adherent cell culture

Dixon, A. R., Rajan, S., Kuo, C. H., Bersano, T., Wold, R., Futai, N., Takayama, S. & Mehta, G., 2014 1月, In: Biomicrofluidics. 8, 1, 016503.

研究成果: Article › 査読

2 被引用数 (Scopus)

Microfluidic long-term gradient generator with axon separation prototyped by 185 nm diffused light photolithography of SU-8 photoresist

Futai, N., Tamura, M., Ogawa, T. & Tanaka, M., 2019 1月 1, In: Micromachines. 10, 1, 9.

研究成果: Article › 査読

Open Access

5 被引用数 (Scopus)

Microscale engine swimming underwater powered by marangoni convection

Tange, M., Takizawa, S., Nagira, Y. & Yoshida, T., 2016, In: Journal of Thermal Science and Technology. 11, 3, JTST0046.

研究成果: Article › 査読

Mixed-Mode Fracture Criterion Considering Fracture Mode Change

UTSUNOMIYA, T. & WATANABE, K., 1993 7月 27, In: Proceedings of Asian Pacific Conference on FRACTURE and STRENGTH'93. p. 759-764

研究成果: Article › 査読

Model based predictive control for tele-operational control system with time delay

Kobayshi, K. & Uchimura, Y., 2018, In: IEEJ Transactions on Industry Applications. 138, 4, p. 323-329 7 p.

研究成果: Article › 査読

Model-error feedback for systems with time-varying delay based on mixed H₂/H_∞ control

Uematsu, N., Suhara, T. & Uchimura, Y., 2016, In: IEEJ Journal of Industry Applications. 5, 3, p. 245-252 8 p.

研究成果: Article › 査読

5 被引用数 (Scopus)

Model Predictive Control with Variable Predictive Horizon for Remote Control System including Variable Delay

Arai, H., Nagakura, H. & Uchimura, Y., 2022, In: IEEJ Journal of Industry Applications. 11, 3, p. 419-426 8 p.

研究成果: Article › 査読

Multicycle Indentation for Evaluation of Polymer Material Viscoelastic Characteristics

Kato, K., Kishibe, S., Sakaue, K. & Yoshimoto, T., 2018 2月 15, (Accepted/In press) In: Experimental Mechanics. p. 1-8 8 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Multiscale Modeling and Analysis of Die Cast Aluminum Alloy to Consider Clustered Shrinkage Pores

Kuwazuru, O., Yano, T., Hangai, Y., Utsunomiya, T., Bidhar, S., Shiihara, Y., Kitahara, S. & Yoshikawa, N., 2011 9月 21, In: International Conference on Advanced Technology in Experimental Mechanics 2011, ATEM’ 11, Abstract Book. p. 226

研究成果: Article › 査読

Nanometer accuracy statistical interferometric technique in monitoring the short-term effects of exogenous plant hormones, auxin and gibberellic acid, on rice plants

Kabir, M., Haruki, N., Rajagopalan, U., Umehara, M. & Kadono, H., 2020, In: Plant Biotechnology. 37, 3, p. 1-11 11 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Network-based control with compensation for time-varying delay and modeling error

Shimano, H. & Uchimura, Y., 2010 4月 23, In: IEEJ Transactions on Industry Applications. 130, 3, p. 326-333+8

研究成果: Article › 査読

New stability index for humanoid robot walking on rough terrain

Fukui, F., Inomata, K. & Uchimura, Y., 2011, In: IEEJ Transactions on Industry Applications. 131, 3, p. 259-266+5

研究成果: Article › 査読

1 被引用数 (Scopus)

Nondestructive observation of compression behavior of pores in three-layered functionally graded aluminum foam of A1050/A6061/ADC12 by X-ray computed tomography

Hangai, Y., Saito, K., Utsunomiya, T., Kitahara, S. & Yoshikawa, N., 2014, In: Keikinzoku/Journal of Japan Institute of Light Metals. 64, 11, p. 587-592 6 p.

研究成果: Article › 査読

Open Access

Nondestructive observation of pores during press forming of aluminum foam by X-ray radiography

Hangai, Y., Kawato, D., Ando, M., Ohashi, M., Morisada, Y., Ogura, T., Fujii, H., Nagahiro, R., Amagai, K., Utsunomiya, T. & Yoshikawa, N., 2020 12月, In: Materials Characterization. 170, 110631.

研究成果: Article › 査読

15 被引用数 (Scopus)

Nondestructive observation of pore structure deformation behavior of functionally graded aluminum foam by X-ray computed tomography

Hangai, Y., Takahashi, K., Yamaguchi, R., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2012 10月 30, In: Materials Science and Engineering A. 556, p. 678-684 7 p.

研究成果: Article › 査読

109 被引用数 (Scopus)

Nondestructive observation of pore structures of A1050 porous aluminum fabricated by friction stir processing

Hangai, Y., Ozeki, Y., Kawano, S., Utsunomiya, T., Kuwazuru, O., Hasegawa, M., Koyama, S. & Yoshikawa, N., 2010 3月, In: Materials Transactions. 51, 3, p. 548-552 5 p.

研究成果: Article › 査読

9 被引用数 (Scopus)

Nondestructive observation of porosity reducing and improvement of mechanical properties by PRPC method of aluminum alloy die castings

Hangai, Y., Takahashi, S., Utsunomiya, T., Kitahara, S., Kuwazuru, O., Sato, K. & Yoshikawa, N., 2008 11月 19, In: Program & Abstracts, 4th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials. p. P3-04

研究成果: Article › 査読

Novel developments of electrostatic separation technology

Saeki, M., 2016, In: Toraibarojisuto/Journal of Japanese Society of Tribologists. 61, 6, p. 376-381 6 p.

研究成果: Article › 査読

Numerical simulation for the tensile failure of randomly oriented short fiber reinforced plastics based on a viscoelastic entropy damage criterion

Kagawa, H., Umezu, Y., Sakaue, K. & Koyanagi, J., 2023 3月, In: Composites Part C: Open Access. 10, 100342.

研究成果: Article › 査読

Open Access

Numerical simulation of the hydrogen storage with reaction heat recovery using metal hydride in the totalized hydrogen energy utilization system

Maeda, T., Nishida, K., Tange, M., Takahashi, T., Nakano, A., Ito, H., Hasegawa, Y., Masuda, M. & Kawakami, Y., 2011 8月, In: International Journal of Hydrogen Energy. 36, 17, p. 10845-10854 10 p.

研究成果: Article › 査読

30 被引用数 (Scopus)

Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression

Kubota, N., Saito, K., Hangai, Y., Utsunomiya, T., Ishima, T., Kawashima, H., Kuwazuru, O. & Yoshikawa, N., 2013, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 79, 804, p. 1076-1078 3 p.

研究成果: Article › 査読

On-chip long-term perfusable microvascular network culture

Nakamura, M., Ninomiya, Y., Nishikata, K. & Futai, N., 2022 6月 1, In: Japanese Journal of Applied Physics. 61, SD, SD1040.

研究成果: Article › 査読

Open Access

On-chip multi-gas incubation for microfluidic cell cultures under hypoxia

Takano, A., Tanaka, M. & Futai, N., 2014 11月 25, In: Biomicrofluidics. 8, 6, 061101.

研究成果: Article › 査読

14 被引用数 (Scopus)

Optical characteristics of human skin with hyperpigmentation caused by fluorinated pyrimidine anticancer agent

Kono, T., Imanishi, N., Nozawa, K., Takashima, A., Maheswari, R. U., Gonome, H. & Yamada, J., 2019 8月 1, In: Biomedical Optics Express. 10, 8, p. 3747-3759 13 p., 366571.

研究成果: Article › 査読

Open Access