機械工学科

2013

Deformation behavior estimation of aluminum foam by X-ray CT image-based finite element analysis

Hangai, Y., Yamaguchi, R., Takahashi, S., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2013 4月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 4, p. 1880-1886 7 p.

研究成果: Article › 査読

26 被引用数 (Scopus)

Deployment control of wireless multihop-relay mobile robots based on voronoi partition

Imaizumi, T., Murakami, H. & Uchimura, Y., 2013 9月, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 184, 4, p. 42-51 10 p.

研究成果: Article › 査読

5 被引用数 (Scopus)

Dielectric spectroscopy of a thin surface layer by differential time-domain reflectometry using a coplanar waveguide circuit line probe

Shirakashi, R., Ogawa, T. & Yamada, J., 2013 2月, In: Measurement Science and Technology. 24, 2, 025501.

研究成果: Article › 査読

1 被引用数 (Scopus)

Estimation of plateau stress of porous aluminum based on mean stress on maximum-porosity cross section

Utsunomiya, T., Yamaguchi, R., Hangai, Y., Kuwazuru, O. & Yoshikawa, N., 2013, In: Materials Transactions. 54, 7, p. 1182-1186 5 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Evaluation of optical properties and thermal performances of different greenhouse covering materials

Al-Mahdouri, A., Baneshi, M., Gonome, H., Okajima, J. & Maruyama, S., 2013 10月, In: Solar Energy. 96, p. 21-32 12 p.

研究成果: Article › 査読

43 被引用数 (Scopus)

Fabrication and tensile property of sandwich panel with ADC12 foam core by friction stir processing route

Utsunomiya, T., Ishii, N., Hangai, Y., Koyama, S., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2013 9月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 9, p. 385-390 6 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Fabrication of functionally graded porous aluminum of three layer structure fabricated by different aluminum alloys

Saito, K., Hangai, Y., Utsunomiya, T., Kuwazuru, O., Yoshikawa, N. & Kitahara, S., 2013, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 79, 804, p. 1088-1092 5 p.

研究成果: Article › 査読

Local ablation of a single cell using micro/nano bubbles

Kuriki, H., Yamanishi, Y., Sakuma, S., Akagi, S. & Arai, F., 2013 6月, In: Journal of Robotics and Mechatronics. 25, 3, p. 476-483 8 p.

研究成果: Article › 査読

Open Access

9 被引用数 (Scopus)

Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression

Kubota, N., Saito, K., Hangai, Y., Utsunomiya, T., Ishima, T., Kawashima, H., Kuwazuru, O. & Yoshikawa, N., 2013, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 79, 804, p. 1076-1078 3 p.

研究成果: Article › 査読

Radiative properties of spectral selective coatings pigmented with TiO₂ nanoparticles

Gonome, H., Baneshi, M., Komiya, A. & Maruyama, S., 2013 6月, In: Heat Transfer - Asian Research. 42, 4, p. 352-363 12 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Stability criterion of biped robot on rough terrain

Mori, K., Fukui, F. & Uchimura, Y., 2013, In: IEEJ Transactions on Industry Applications. 133, 3, p. 320-327 8 p.

研究成果: Article › 査読

2012

Air-flow-based single-cell dispensing system

Kawahara, T., Ohashi, S., Hagiwara, M., Yamanishi, Y. & Arai, F., 2012, In: Advanced Robotics. 26, 3-4, p. 291-306 16 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

Collision analysis between granular materials and elastic plate

Orii, Y., Ishigaki, S., Tsugihashi, K., Masuda, K. & Saeki, M., 2012, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 78, 789, p. 1542-1552 11 p.

研究成果: Article › 査読

Contactless magnetic gear for robot control application

Komiyama, H. & Uchimura, Y., 2012, In: IEEJ Transactions on Industry Applications. 132, 3, p. 389-396 8 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Deployment control of wireless multi-hop-relay mobile robots based on voronoi partition

Imaizumi, T., Murakami, H. & Uchimura, Y., 2012, In: IEEJ Transactions on Industry Applications. 132, 3, p. 381-388 8 p.

研究成果: Article › 査読

Effects of Porosity and Pore structure on Compression Properties of Blowing-Agent-Free Aluminum Foams Fabricated from Aluminum Alloy Die Castings

Hangai, Y., Kato, H., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2012 8月 1, In: Materials Transactions. 53, p. 1515-1520

研究成果: Article › 査読

20 被引用数 (Scopus)

Evaluation of Viscoelastic Characteristics of Short-fiber Reinforced Composite by Indentation Method

Sakaue, K., Isawa, T., Ogawa, T. & Yoshimoto, T., 2012 10月, In: Experimental Mechanics. 52, 8, p. 1003-1008 6 p.

研究成果: Article › 査読

7 被引用数 (Scopus)

Fabrication and tensile tests of aluminum foam sandwich with dense steel face sheets by friction stir processing route

Hangai, Y., Ishii, N., Koyama, S., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2012, In: Materials Transactions. 53, 4, p. 584-587 4 p.

研究成果: Article › 査読

23 被引用数 (Scopus)

Fabrication of ADC12 porous aluminum with graded porosities and pore structures

Utsunomiya, T., Takahashi, K., Kato, H., Hangai, Y., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2012, In: Keikinzoku/Journal of Japan Institute of Light Metals. 62, 7, p. 278-284 7 p.

研究成果: Article › 査読

Fabrication of composite structural material with ADC12 porous aluminum and dense steel by friction stir welding route

Hangai, Y., Ishii, N., Koyama, S., Utsunomiya, T. & Kitahara, S., 2012 5月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 76, 5, p. 349-354 6 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Fabrication of functionally graded aluminum foam by friction stir processing route (invited lecture)

Hangai, Y., Utsunomiya, T., Kuwazuru, O. & Yoshikawa, N., 2012 11月 30, In: The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2012). Volume 2, p. 9-10

研究成果: Article › 査読

Fabrication of functionally graded aluminum foam using aluminum alloy die castings by friction stir processing

Hangai, Y., Takahashi, K., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2012 2月 1, In: Materials Science and Engineering A. 534, p. 716-719 4 p.

研究成果: Article › 査読

93 被引用数 (Scopus)

Flame structure of lean premixed and diffusion combined flames near extinction limit

Kawanami, T. & Yahagi, Y., 2012, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 78, 789, p. 1118-1126 9 p.

研究成果: Article › 査読

Local Ablation by a Microelectric Knife: Enucleation of an Oocyte

Yamanishi, Y., Kuriki, H., Sakuma, S., Onda, K. & Arai, F., 2012 6月 12, In: IEEE Nanotechnology Magazine. 6, 2, p. 20-25 6 p.

研究成果: Article › 査読

6 被引用数 (Scopus)

Nondestructive observation of pore structure deformation behavior of functionally graded aluminum foam by X-ray computed tomography

Hangai, Y., Takahashi, K., Yamaguchi, R., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2012 10月 30, In: Materials Science and Engineering A. 556, p. 678-684 7 p.

研究成果: Article › 査読

107 被引用数 (Scopus)

Relationship between porosity and interface fracture on aluminum foam sandwich with dense steel face sheets fabricated by friction stir processing route

Utsunomiya, T., Ishii, N., Hangai, Y., Koyama, S., Kuwazuru, O. & Yoshikawa, N., 2012, In: Materials Transactions. 53, 9, p. 1674-1679 6 p.

研究成果: Article › 査読

9 被引用数 (Scopus)

Robust H8 control for time-varying delay systems with frequency-dependent performance weights

Nagahara, M., Arai, S. & Uchimura, Y., 2012, In: IEEJ Transactions on Industry Applications. 132, 6, p. 616-624 9 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Study on absorption/desorption characteristics of a metal hydride tank for boil-off gas from liquid hydrogen

Nakano, A., Maeda, T., Ito, H., Masuda, M., Kawakami, Y., Tange, M., Takahashi, T. & Nishida, K., 2012 3月, In: International Journal of Hydrogen Energy. 37, 6, p. 5056-5062 7 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

The effect of dispersed state to control of radiative properties of coatings pigmented with nanoparticles

Gonome, H., Baneshi, M., Vaillon, R., Okajima, J., Komiya, A. & Maruyama, S., 2012, In: Journal of Thermal Science and Technology. 7, 2, p. 364-378 15 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

The effect of particles size distribution on aesthetic and thermal performances of polydisperse TiO ₂ pigmented coatings: Comparison between numerical and experimental results

Baneshi, M., Gonome, H., Komiya, A. & Maruyama, S., 2012 5月, In: Journal of Quantitative Spectroscopy and Radiative Transfer. 113, 8, p. 594-606 13 p.

研究成果: Article › 査読

29 被引用数 (Scopus)

2011

A fractal-based 2D expansion method for multi-scale volume data visualization

Fujiwara, T., Iwamaru, M., Tange, M., Someya, S. & Okamoto, K., 2011 6月, In: Journal of Visualization. 14, 2, p. 171-190 20 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Analysis of particle damping with hollow steel particles

Nogami, T., Takahashi, S. & Saeki, M., 2011, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 77, 783, p. 4058-4067 10 p.

研究成果: Article › 査読

Open Access

A relay structure for a wireless network for real-time control

Yamada, H., Yoshizawa, A. & Uchimura, Y., 2011 9月 8, In: IEEJ Transactions on Industry Applications. 131, 3, p. 364-371+19

研究成果: Article › 査読

Development of electrostatic separator using cylindrical electrodes

Saeki, M., 2011, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 77, 780, p. 2953-2961 9 p.

研究成果: Article › 査読

Open Access

Effects of amounts of blowing agent and contained gases on porosity and pore structure of porous aluminum fabricated from aluminum alloy die casting by friction stir processing route

Utsunomiya, T., Takahashi, K., Hangai, Y. & Kitahara, S., 2011 6月, In: Materials Transactions. 52, 6, p. 1263-1268 6 p.

研究成果: Article › 査読

16 被引用数 (Scopus)

Experimental study of hydrogen storage with reaction heat recovery using metal hydride in a totalized hydrogen energy utilization system

Tange, M., Maeda, T., Nakano, A., Ito, H., Kawakami, Y., Masuda, M. & Takahashi, T., 2011 9月, In: International Journal of Hydrogen Energy. 36, 18, p. 11767-11776 10 p.

研究成果: Article › 査読

37 被引用数 (Scopus)

Fabrication of A1050-A6061 functionally graded aluminum foam by friction stir processing route

Hangai, Y., Oba, Y., Koyama, S. & Utsunomiya, T., 2011 12月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42, 12, p. 3585-3589 5 p.

研究成果: Article › 査読

28 被引用数 (Scopus)

High cycle fatigue strength of 2.25Cr-1Mo steel under repeated two-step variable amplitude loading

Nakazawa, T., Ogawa, T. & Sakaue, K., 2011, In: Zairyo/Journal of the Society of Materials Science, Japan. 60, 10, p. 885-889 5 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Manufacturing of porous aluminum component by using die

Utsunomiya, T., Tsukada, A. & Hangai, Y., 2011, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 77, 779, p. 1017-1020 4 p.

研究成果: Article › 査読

Manufacturing of sandwich panel with porous aluminum/dense steel plate by friction stir processing route

Utsunomiya, T., Ishii, N., Hangai, Y., Koyama, S., Hasegawa, M., Kuwazuru, O. & Yoshikawa, N., 2011, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 77, 779, p. 1013-1016 4 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Multiscale Modeling and Analysis of Die Cast Aluminum Alloy to Consider Clustered Shrinkage Pores

Kuwazuru, O., Yano, T., Hangai, Y., Utsunomiya, T., Bidhar, S., Shiihara, Y., Kitahara, S. & Yoshikawa, N., 2011 9月 21, In: International Conference on Advanced Technology in Experimental Mechanics 2011, ATEM’ 11, Abstract Book. p. 226

研究成果: Article › 査読

New stability index for humanoid robot walking on rough terrain

Fukui, F., Inomata, K. & Uchimura, Y., 2011, In: IEEJ Transactions on Industry Applications. 131, 3, p. 259-266+5

研究成果: Article › 査読

1 被引用数 (Scopus)

Numerical simulation of the hydrogen storage with reaction heat recovery using metal hydride in the totalized hydrogen energy utilization system

Maeda, T., Nishida, K., Tange, M., Takahashi, T., Nakano, A., Ito, H., Hasegawa, Y., Masuda, M. & Kawakami, Y., 2011 8月, In: International Journal of Hydrogen Energy. 36, 17, p. 10845-10854 10 p.

研究成果: Article › 査読

30 被引用数 (Scopus)

Posture stabilization of robot by visual feedback

Fukuoka, K., Nagahara, M. & Uchimura, Y., 2011 9月 8, In: IEEJ Transactions on Industry Applications. 131, 3, p. 327-333+14

研究成果: Article › 査読

Quantitative evaluation of pore area distribution in ADC12 porous aluminum by fractal dimensions

Hangai, Y., Takahashi, K., Kato, H., Utsunomiya, T., Kitahara, S., Kuwazuru, O. & Yoshikawa, N., 2011 8月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 75, 8, p. 465-467 3 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Swirling flow behavior in a disk channel for planar-type SOFC

Tsunoda, K. & Kouda, T., 2011, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 77, 773, p. 76-85 10 p.

研究成果: Article › 査読

2010

Characterization of Ultrafine Particle Generation from Laser Printers using Different Types of Chambers

Namiki, N., Kagi, N., Nishimura, N., Sekiguchi, K., aAzuma, K., Tamura, H., Suwa, Y. & Fujii, S., 2010 10月 1, In: International Symposium on Contamination Control 2010. p. 394-398

研究成果: Article › 査読

Clustered shrinkage pores in ill-conditioned aluminum alloy die castings

Hangai, Y., Kuwazuru, O., Yano, T., Utsunomiya, T., Murata, Y., Kitahara, S., Bidhar, S. & Yoshikawa, N., 2010 9月, In: Materials Transactions. 51, 9, p. 1574-1580 7 p.

研究成果: Article › 査読

12 被引用数 (Scopus)

Communication: Effect of the amount of gases on the foaming efficiency of porous aluminum using die castings fabricated by friction stir processing

Hangai, Y., Kato, H., Utsunomiya, T. & Kitahara, S., 2010 8月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41, 8, p. 1883-1886 4 p.

研究成果: Article › 査読

12 被引用数 (Scopus)

Compressive properties of porous aluminum fabricated by friction stir processing route without the use of blowing agent using aluminum alloy die castings

Hangai, Y., Kato, H., Utsunomiya, T. & Kitahara, S., 2010 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 74, 10, p. 697-699 3 p.

研究成果: Article › 査読

Open Access

6 被引用数 (Scopus)

機械工学科

研究成果

検索結果