研究成果 1983 2019

フィルター
Conference contribution
1999
3 引用 (Scopus)

Thermal fatigue damage of quad flat pack leads and Sn-3.5Ag-X (X=Bi and Cu) solder joints

Warashina, K., Kariya, Y., Hirata, Y. & Otsuka, M., 1999 1 1, Proceedings - 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign 1999. Institute of Electrical and Electronics Engineers Inc., p. 626-631 6 p. 747688

研究成果: Conference contribution

Thermal fatigue
Fatigue damage
Soldering alloys
Fatigue of materials
Bismuth
2000
2 引用 (Scopus)

Preparation of mono-dispersed droplet using ultrasonic

Arai, T., Imaizumi, K. & Takeda, K., 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (版). p. 989-992 4 p.

研究成果: Conference contribution

Ultrasonics
Liquids
Electric distortion
Stroboscopes
Acoustic generators
2004
8 引用 (Scopus)

Contact resistance characteristics of high temperature superconducting Bulk- III

Imaizumi, T., Yamamoto, N., Tomita, M., Sakai, N., Murakami, M., Hirabayashi, I. & Sawa, K., 2004, Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts. p. 416-420 5 p.

研究成果: Conference contribution

Contact resistance
Switches
Temperature
Metals
High temperature superconductors
2005
8 引用 (Scopus)

Contact resistance characteristics of high temperature superconducting bulk- Part IV

Fujita, H., Imaizumi, T., Tomita, M., Sakai, N., Murakami, M., Hirabayashi, I. & Sawa, K., 2005, Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts. 巻 2005. p. 272-276 5 p. 1518256

研究成果: Conference contribution

Contact resistance
Switches
Metals
Indium
Silver
2006
1 引用 (Scopus)

Contact resistance characteristics of YBaCuO superconductors with deposited metal layer

Fujita, H., Fukuda, K., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2006, 23rd International Conference on Electrical Contacts, ICEC 2006 - together with the 6th International Session on Electromechanical Devices, IS-EMD 2006. p. 390-395 6 p.

研究成果: Conference contribution

Contact resistance
contact resistance
Superconducting materials
Metals
switches

Degradation of organic coatings on steel investigated by dynamic electrochemical impedance spectroscopy

Itagaki, M., Ono, A., Watanabe, K., Katayama, H. & Noda, K., 2006, ECS Transactions. 9 版 巻 1. p. 215-222 8 p.

研究成果: Conference contribution

Organic coatings
Electrochemical impedance spectroscopy
Degradation
Steel
Corrosion

The force relaxation in levitating high Tc superconductor

Ito, E., Komano, Y., Sawa, K., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 3 31, AIP Conference Proceedings. 巻 824 II. p. 820-827 8 p.

研究成果: Conference contribution

levitation
descent
flywheels
electromagnets
power loss
2007

A study on quenching characteristics of YBaCuO bulk superconductor with deposited Ag layer

Fukuda, K., Fujita, H., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2007, Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts. p. 76-81 6 p. 4318198

研究成果: Conference contribution

Superconducting materials
Quenching
Switches
Energy storage
Contact resistance

Calcium phosphate precipitation by galvanic current between titanium and gold in pseudo-body fluid

Kobayashi, E., Ogo, M., Doi, H., Yoneyama, T., Noda, K. & Hanawa, T., 2007, Materials Science Forum. PART 1 版 巻 539-543. p. 653-656 4 p. (Materials Science Forum; 巻数 539-543, 番号 PART 1).

研究成果: Conference contribution

Body fluids
Calcium phosphate
Titanium
Gold coatings
Gold
3 引用 (Scopus)

Contact resistance characteristics of high temperature superconducting bulk - Part V

Fujita, H., Fukuda, K., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2007, Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts. p. 124-130 7 p. 4063111

研究成果: Conference contribution

Contact resistance
Switches
Temperature
Energy storage
Finite element method
6 引用 (Scopus)

Corrosion behavior of zirconium based alloys in simulated body fluids

Tsutsumi, Y., Takano, Y., Doi, H., Noda, K. & Hanawa, T., 2007, Materials Science Forum. PART 2 版 巻 561-565. p. 1489-1492 4 p. (Materials Science Forum; 巻数 561-565, 番号 PART 2).

研究成果: Conference contribution

Body fluids
Pitting
Zirconium
Corrosion
Corrosion resistance
7 引用 (Scopus)

Effect of Ni addition on bending properties of Sn-Ag-Cu lead-free solder joints

Kobayashi, T., Kariya, Y., Sasaki, T., Tanaka, M. & Tatsumi, K., 2007, Proceedings - Electronic Components and Technology Conference. p. 684-688 5 p. 4249956

研究成果: Conference contribution

Fatigue of materials
Bending tests
Crack propagation
Temperature
Substrates

Effects of cross-linkage and hydroxyl groups on bonding strength between titanium and segmented polyurethane through 3-(trimethoxysilyl) propyl methacrylate

Sakamoto, H., Hirohashi, Y., Doi, H., Noda, K. & Hanawa, T., 2007, Materials Science Forum. PART 2 版 巻 561-565. p. 1477-1480 4 p. (Materials Science Forum; 巻数 561-565, 番号 PART 2).

研究成果: Conference contribution

Polyurethanes
Titanium
Hydroxyl Radical
Artificial organs
3-(trimethoxysilyl)propyl methacrylate
2008
1 引用 (Scopus)

Corrosion behavior of Al-Al3Ni and Al-Al2Cu functionally graded materials fabricated by a centrifugal method

Noda, K., Miyahara, K. & Watanabe, Y., 2008, AIP Conference Proceedings. 巻 973. p. 574-578 5 p.

研究成果: Conference contribution

intermetallics
corrosion
curves
polarization
borates

Corrosion behavior of type 304 and 316 stainless steels under stress loading environment

Suzuki, K. & Noda, K., 2008, ECS Transactions. 48 版 巻 16. p. 15-21 7 p.

研究成果: Conference contribution

Stainless steel
Corrosion
Passivation
Corrosion resistance
Polarization

Corrosion resistance evaluation of a functionally graded material using an electrochemical sensor

Saitoh, T., Kakefuda, K., Noda, K. & Watanabe, Y., 2008, AIP Conference Proceedings. 巻 973. p. 965-970 6 p.

研究成果: Conference contribution

corrosion resistance
corrosion
evaluation
stainless steels
sensors
3 引用 (Scopus)

Degradation of solid polymer membrane in PEFC by hydrogen peroxide

Kato, S., Masahira, Y., Noda, K. & Imai, H., 2008, ECS Transactions. 48 版 巻 16. p. 1-5 5 p.

研究成果: Conference contribution

Hydrogen peroxide
Fuel cells
Electrolytes
Membranes
Degradation

End corrosion of galvanized steels under atmospheric corrosion environment

Sekita, K., Hirano, T. & Noda, K., 2008, ECS Transactions. 48 版 巻 16. p. 7-13 7 p.

研究成果: Conference contribution

Atmospheric corrosion
Anodic polarization
Corrosion
Steel
Corrosion prevention
2 引用 (Scopus)

Influence of al concentration on deformation behavior and fracture mode of fe-30mn-6(SI, AL) alloys

Ogawa, K., Sawaguchi, T., Kikuchi, T., Koyama, M. & Murakami, M., 2008, SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies. p. 645-652 8 p.

研究成果: Conference contribution

Ductile fracture
Electrons
Twinning
Martensitic transformations
Austenite

Localized corrosion behavior of austenitic stainless steels under stress loading environment

Noda, K. & Suzuki, K., 2008, ECS Transactions. 52 版 巻 16. p. 239-246 8 p.

研究成果: Conference contribution

Austenitic stainless steel
Corrosion
Stress corrosion cracking
Passivation
Stainless steel

Quenching characteristics of YBCO bulk contacts

Sawa, K., Fukuda, K., Ogawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2008, Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts. p. 319-324 6 p. 4694963

研究成果: Conference contribution

Quenching
Switches
Silver
Contact resistance
Polishing

Shape memory characteristics of Fe-30Mn-5Si-1Al and Fe28Mn-5Si-1 AI-5Cr alloys

Koyama, M., Murakami, M., Ogawa, K., Kikuchi, T. & Sawaguchi, S., 2008, SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies. p. 653-658 6 p.

研究成果: Conference contribution

Shape memory effect
Recovery
Ductility
Tensile strain
Martensite
2009

Nanoscale pinning media in bulk melt-textured high-tc superconductors and their importance for super-magnet applications

Miryala, M., Sakai, N., Jirsa, M., Murakami, M. & Hirabayashi, I., 2009, Ceramic Engineering and Science Proceedings. 8 版 巻 29. p. 159-167 9 p.

研究成果: Conference contribution

Superconducting materials
Magnets
Argon
Wind power
Rare earths
1 引用 (Scopus)

The improvement of shape recovery property through training treatment in an Fe-30Mn-5Si-1Al

Koyama, M., Sawaguchi, T., Ogawa, K., Kikuchi, T. & Murakami, M., 2009, Proceedings of the International Conference on Martensitic Transformations, ICOMAT-08. p. 583-586 4 p.

研究成果: Conference contribution

Recovery
Twinning
Martensitic transformations
Stress-strain curves
Shape memory effect
2010
7 引用 (Scopus)

Effect of joint size on low-cycle fatigue properties of Sn-Ag-Cu solder joint

Kariya, Y., Sato, K., Asari, S. & Kanda, Y., 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501298

研究成果: Conference contribution

Crack initiation
Soldering alloys
Fatigue of materials
Crack propagation
1 引用 (Scopus)

Thermal fatigue life evaluation of CSP joints by mechanical fatigue testing

Kanda, Y., Zama, K., Kariya, Y., Oota, H., Kikuchi, S., Yamabe, H. & Nakamura, K., 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501291

研究成果: Conference contribution

Thermal fatigue
Fatigue testing
Mechanical testing
Fatigue of materials
Coarsening
1 引用 (Scopus)

Visco-elastic effect of underfill material in reliability analysis of flip-chip package

Kanda, Y., Zama, K., Kariya, Y., Mikami, T., Kobayashi, T., Sato, T., Enomoto, T. & Hirata, K., 2010, Proceedings of the ASME InterPack Conference 2009, IPACK2009. 巻 1. p. 755-759 5 p.

研究成果: Conference contribution

Reliability analysis
Fatigue of materials
Finite element method
Viscoelasticity
Thermal cycling
2011
2 引用 (Scopus)

Development of precise micro press forming system for fabrication of micro parts

Yang, M., Aizawa, T., Nakano, S. & Ito, K., 2011, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1093-1096 4 p.

研究成果: Conference contribution

Fabrication
Forging
Metal forming
Joining
Metal foil
6 引用 (Scopus)

Dry transfer stamping by nano-laminated DLC-coated tool

Morita, H., Aizawa, T., Yoshida, N. & Kurozumi, S., 2011, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1103-1108 6 p.

研究成果: Conference contribution

Diamond
Stamping
Diamonds
Carbon
Coatings

Effect of cyclic strain-hardening exponent on fatigue ductility exponent for Sn based alloy

Kanda, Y., Oto, Y., Shiigi, Y. & Kariya, Y., 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. 巻 2. p. 713-718 6 p.

研究成果: Conference contribution

Strain hardening
Ductility
Fatigue of materials
Solid solutions
Soldering alloys
1 引用 (Scopus)

Fatigue life and fracture behavior of micro size Sn-Ag-Cu solder joint

Naoki, T., Kariya, Y. & Kanda, Y., 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. 巻 2. p. 707-712 6 p.

研究成果: Conference contribution

Soldering alloys
Fatigue of materials
Crack initiation
Grain boundaries
Strain hardening
4 引用 (Scopus)

Fine micro-stamping system for micro-pattern printing onto polymers and glasses

Aizawa, T., Itoh, K. & Fukuda, T., 2011, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 1097-1102 6 p.

研究成果: Conference contribution

Stamping
Printing
Polymers
Glass
Displacement control

Optimal chain length of peg to improve cytocompatibility of rgd/peg/ti material

Hanawa, T., Kurashima, K., Oya, K., Yusuketsustumi, A., Doi, H., Nomura, N. & Noda, K., 2011, 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials.

研究成果: Conference contribution

Chain length
2012

Duplex coating of AISI 316 and 420 die for hot mold stamping

Aizawa, T., Fukuda, T. & Itoh, K., 2012, Steel Research International. Wiley-VCH Verlag, 巻 SPL. ISSUE. p. 1055-1058 4 p.

研究成果: Conference contribution

stamping
Stamping
Nitriding
Oxides
Hardness testing
3 引用 (Scopus)

Micro-pattern imprinting onto aluminum thin sheet by CNC-controlled stamping

Aizawa, T. & Fukuda, T., 2012, Steel Research International. Wiley-VCH Verlag, 巻 SPL. ISSUE. p. 739-742 4 p.

研究成果: Conference contribution

stamping
Stamping
Aluminum
Aluminum sheet
grooving
1 引用 (Scopus)

Pitting corrosion behavior and grain evolution of shot peened type 304 stainless steel

Widodo, T. D. & Noda, K., 2012, ECS Transactions. 37 版 巻 50. p. 273-277 5 p.

研究成果: Conference contribution

Pitting
Stainless steel
Shot peening
Corrosion
Electrodes

Wet chemical synthesis of Ni-Al nanoparticles at ambient condition

Fadil, N. A., Govindachetty, S., Yoshikawa, H., Yamashita, Y., Ueda, S., Kobayashi, K., Tanabe, T., Hara, T., Gubbala, V. R., Murakami, H., Noda, K. & Abe, H., 2012, Advanced Materials Research. 巻 557-559. p. 442-447 6 p. (Advanced Materials Research; 巻数 557-559).

研究成果: Conference contribution

Organometallics
Photoelectron spectroscopy
Nanoparticles
X ray spectroscopy
Intermetallics
2013

A finite element analysis of board level drop reliability test and analysis of stress buffer effect of polyimide

Fujita, M., Anzai, N., Sakamaki, K. & Kariya, Y., 2013, ICSJ 2013 - IEEE CPMT Symposium Japan. IEEE Computer Society, 6756126

研究成果: Conference contribution

Polyimides
Finite element method
1 引用 (Scopus)

Corrosion analysis of zinc rich epoxy coatings on steel in NaCl solution

Sofian, A. & Noda, K., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., 巻 3. p. 2171-2176 6 p.

研究成果: Conference contribution

Steel
Zinc
Paint
Corrosion
Coatings

Corrosion performance of zinc-rich paints (ZRP) on mild steel in NaCl solution

Sofian, A. H., Tanaka, A. & Noda, K., 2013, ECS Transactions. 19 版 巻 45. p. 17-24 8 p.

研究成果: Conference contribution

Paint
Carbon steel
Zinc
Corrosion
Coatings
3 引用 (Scopus)

Corrosion resistance and mechanism of zinc rich paint in corrosive media

Sofian, A. H. & Noda, K., 2013, ECS Transactions. 38 版 Electrochemical Society Inc., 巻 58. p. 29-37 9 p.

研究成果: Conference contribution

Paint
Corrosion resistance
Zinc
Electrochemical impedance spectroscopy
Coatings

Corrosion resistance enhancement of 304 stainless steel under droplet of chloride solution by mechanical surface treatment

Widodo, T. D. & Noda, K., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., 巻 3. p. 2423-2429 7 p.

研究成果: Conference contribution

Stainless Steel
Surface potential
Corrosion resistance
Surface treatment
Chlorides

Effect of temperature and strain rate on low-cycle fatigue life of Bi-Sn eutectic alloy

Sato, T., Kariya, Y. & Fukui, K., 2013, ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013. 巻 1.

研究成果: Conference contribution

Eutectics
Strain rate
Fatigue of materials
Temperature
Ductility

Localized corrosion resistance of Co-Cr alloy in NaCl solution

Suzuki, R., Noda, K., Tsutsumi, Y. & Hanawa, T., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., 巻 3. p. 2451-2454 4 p.

研究成果: Conference contribution

Corrosion resistance
Stainless Steel
Stainless steel
Polarization
Corrosion

Mapping of phase distribution in electron holography with a stage-scanning system

Lei, D., Mitsuishi, K., Harada, K., Shimojo, M., Ju, D. & Takeguchi, M., 2013, Materials Science Forum. 巻 750. p. 152-155 4 p. (Materials Science Forum; 巻数 750).

研究成果: Conference contribution

Electron holography
Holograms
holography
Electron optics
Scanning

Microstructural analysis of low-cycle fatigue damage process of Sn-Ag-Cu solder joint

Kontani, H., Kariya, Y. & Fumikura, T., 2013, ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013. 巻 1.

研究成果: Conference contribution

Fatigue damage
Soldering alloys
Grain boundaries
Stress concentration
Crack propagation
9 引用 (Scopus)

Micro-texturing onto amorphous carbon materials as a mold-die for micro-forming

Aizawa, T., 2013, Applied Mechanics and Materials. 巻 289. p. 23-37 15 p. (Applied Mechanics and Materials; 巻数 289).

研究成果: Conference contribution

Texturing
Amorphous carbon
Stamping
Glassy carbon
Carbon
3 引用 (Scopus)

Quaternary alloy of Ni-Zn-Cu-P from hypophosphite based electroless deposition method

Zaimi, M. & Noda, K., 2013, ECS Transactions. 19 版 巻 45. p. 3-16 14 p.

研究成果: Conference contribution

Electroless plating
Plating
Zinc
Polarization
Corrosion

Surface potential distribution observation of the surface modified of 304 stainless steel

Widodo, T. D. & Noda, K., 2013, ECS Transactions. 38 版 Electrochemical Society Inc., 巻 58. p. 53-59 7 p.

研究成果: Conference contribution

Surface potential
Surface treatment
Stainless steel
Microscopes
Electrolytes
2014
4 引用 (Scopus)

Large area micro-texture imprinting onto metallic sheet via CNC stamping

Aizawa, T., Tamaki, M. & Fukuda, T., 2014, 11th International Conference on Technology of Plasticity, ICTP 2014. Elsevier Ltd, 巻 81. p. 1427-1432 6 p.

研究成果: Conference contribution

Stamping
Aspect ratio
Aluminum sheet
Textures
Motion control