研究成果 1983 2019

フィルター
Conference contribution
9 引用 (Scopus)

Micro-texturing onto amorphous carbon materials as a mold-die for micro-forming

Aizawa, T., 2013, Applied Mechanics and Materials. 巻 289. p. 23-37 15 p. (Applied Mechanics and Materials; 巻数 289).

研究成果: Conference contribution

Texturing
Amorphous carbon
Stamping
Glassy carbon
Carbon

Motion-controlled precise stamping for microtexturing onto aluminum sheet

Aizawa, T., Itoh, T., Tamaki, M. & Fukuda, T., 2014, Key Engineering Materials. Trans Tech Publications Ltd, 巻 622-623. p. 64-71 8 p. (Key Engineering Materials; 巻数 622-623).

研究成果: Conference contribution

Aluminum sheet
Stamping
Texturing
Motion control
Metals

Nanoscale pinning media in bulk melt-textured high-tc superconductors and their importance for super-magnet applications

Miryala, M., Sakai, N., Jirsa, M., Murakami, M. & Hirabayashi, I., 2009, Ceramic Engineering and Science Proceedings. 8 版 巻 29. p. 159-167 9 p.

研究成果: Conference contribution

Superconducting materials
Magnets
Argon
Wind power
Rare earths

Optimal chain length of peg to improve cytocompatibility of rgd/peg/ti material

Hanawa, T., Kurashima, K., Oya, K., Yusuketsustumi, A., Doi, H., Nomura, N. & Noda, K., 2011, 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials.

研究成果: Conference contribution

Chain length
1 引用 (Scopus)

Pitting corrosion behavior and grain evolution of shot peened type 304 stainless steel

Widodo, T. D. & Noda, K., 2012, ECS Transactions. 37 版 巻 50. p. 273-277 5 p.

研究成果: Conference contribution

Pitting
Stainless steel
Shot peening
Corrosion
Electrodes

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 8 10, MATEC Web of Conferences. EDP Sciences, 巻 21. 09002

研究成果: Conference contribution

Texturing
Nitriding
Stainless Steel
Molds
Stainless steel

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 1 1, Technology of Plasticity. Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

embossing
Aluminum sheet
punches
Stamping
Steel
1 引用 (Scopus)

Preparation and Characterization of DyBa2Cu3Oy Thick Films with Dy2BaO4 Precursor

Kawata, S., Miryala, M., Inoue, K. & Murakami, M., 2015, Physics Procedia. Elsevier, 巻 65. p. 61-64 4 p.

研究成果: Conference contribution

thick films
preparation
printing
acetates
magnetization
2 引用 (Scopus)

Preparation of mono-dispersed droplet using ultrasonic

Arai, T., Imaizumi, K. & Takeda, K., 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (版). p. 989-992 4 p.

研究成果: Conference contribution

Ultrasonics
Liquids
Electric distortion
Stroboscopes
Acoustic generators
3 引用 (Scopus)

Quaternary alloy of Ni-Zn-Cu-P from hypophosphite based electroless deposition method

Zaimi, M. & Noda, K., 2013, ECS Transactions. 19 版 巻 45. p. 3-16 14 p.

研究成果: Conference contribution

Electroless plating
Plating
Zinc
Polarization
Corrosion

Quenching characteristics of YBCO bulk contacts

Sawa, K., Fukuda, K., Ogawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2008, Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts. p. 319-324 6 p. 4694963

研究成果: Conference contribution

Quenching
Switches
Silver
Contact resistance
Polishing

Reconstruction method for phase-shifting electron holography fitted with fresnel diffraction affected fringes

Lei, D., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2015, Applied Materials and Technologies. Trans Tech Publications Ltd, 巻 833. p. 215-221 7 p. (Materials Science Forum; 巻数 833).

研究成果: Conference contribution

Electron holography
Fresnel diffraction
Holograms
holography
Diffraction

Shape memory characteristics of Fe-30Mn-5Si-1Al and Fe28Mn-5Si-1 AI-5Cr alloys

Koyama, M., Murakami, M., Ogawa, K., Kikuchi, T. & Sawaguchi, S., 2008, SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies. p. 653-658 6 p.

研究成果: Conference contribution

Shape memory effect
Recovery
Ductility
Tensile strain
Martensite

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 8 10, MATEC Web of Conferences. EDP Sciences, 巻 21. 08002

研究成果: Conference contribution

Plasma density
Stamping
Nitriding
Stainless Steel
Molds

Study of measuring method for corrosion behavior analysis in low concentration solution

Yagi, Y., Suzuki, R. & Noda, K., 2016 1 1, Corrosion General Poster Session. 26 版 Electrochemical Society Inc., 巻 75. p. 7-15 9 p.

研究成果: Conference contribution

Corrosion
Cathodic protection
Corrosion protection
Stainless steel
Electrolytes

Study on low-cycle fatigue testing and therrmal fatigue life prediction of electroplated copper thin film for through hole via

Watanabe, K., Yajima, N., Kariya, Y., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H., 2017 6 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., 1 p. 7947481

研究成果: Conference contribution

Fatigue testing
Thermal fatigue
Copper
Fatigue of materials
Thin films

Surface potential distribution observation of the surface modified of 304 stainless steel

Widodo, T. D. & Noda, K., 2013, ECS Transactions. 38 版 Electrochemical Society Inc., 巻 58. p. 53-59 7 p.

研究成果: Conference contribution

Surface potential
Surface treatment
Stainless steel
Microscopes
Electrolytes

Temperature dependence of fatigue crack propagation rate of pressureless sintered Ag nanoparticles

Kimura, R., Kariya, Y., Mizumura, N. & Sasaki, K., 2017 6 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., 1 p. 7947482

研究成果: Conference contribution

Fatigue crack propagation
Nanoparticles
Thermal effects
Temperature

The force relaxation in levitating high Tc superconductor

Ito, E., Komano, Y., Sawa, K., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 3 31, AIP Conference Proceedings. 巻 824 II. p. 820-827 8 p.

研究成果: Conference contribution

levitation
descent
flywheels
electromagnets
power loss
1 引用 (Scopus)

The improvement of shape recovery property through training treatment in an Fe-30Mn-5Si-1Al

Koyama, M., Sawaguchi, T., Ogawa, K., Kikuchi, T. & Murakami, M., 2009, Proceedings of the International Conference on Martensitic Transformations, ICOMAT-08. p. 583-586 4 p.

研究成果: Conference contribution

Recovery
Twinning
Martensitic transformations
Stress-strain curves
Shape memory effect
3 引用 (Scopus)

Thermal fatigue damage of quad flat pack leads and Sn-3.5Ag-X (X=Bi and Cu) solder joints

Warashina, K., Kariya, Y., Hirata, Y. & Otsuka, M., 1999 1 1, Proceedings - 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign 1999. Institute of Electrical and Electronics Engineers Inc., p. 626-631 6 p. 747688

研究成果: Conference contribution

Thermal fatigue
Fatigue damage
Soldering alloys
Fatigue of materials
Bismuth
1 引用 (Scopus)

Thermal fatigue life evaluation of CSP joints by mechanical fatigue testing

Kanda, Y., Zama, K., Kariya, Y., Oota, H., Kikuchi, S., Yamabe, H. & Nakamura, K., 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501291

研究成果: Conference contribution

Thermal fatigue
Fatigue testing
Mechanical testing
Fatigue of materials
Coarsening
1 引用 (Scopus)

Visco-elastic effect of underfill material in reliability analysis of flip-chip package

Kanda, Y., Zama, K., Kariya, Y., Mikami, T., Kobayashi, T., Sato, T., Enomoto, T. & Hirata, K., 2010, Proceedings of the ASME InterPack Conference 2009, IPACK2009. 巻 1. p. 755-759 5 p.

研究成果: Conference contribution

Reliability analysis
Fatigue of materials
Finite element method
Viscoelasticity
Thermal cycling

Wet chemical synthesis of Ni-Al nanoparticles at ambient condition

Fadil, N. A., Govindachetty, S., Yoshikawa, H., Yamashita, Y., Ueda, S., Kobayashi, K., Tanabe, T., Hara, T., Gubbala, V. R., Murakami, H., Noda, K. & Abe, H., 2012, Advanced Materials Research. 巻 557-559. p. 442-447 6 p. (Advanced Materials Research; 巻数 557-559).

研究成果: Conference contribution

Organometallics
Photoelectron spectroscopy
Nanoparticles
X ray spectroscopy
Intermetallics