研究成果

フィルター
Conference contribution
Conference contribution

Micro-pattern imprinting onto aluminum thin sheet by CNC-controlled stamping

Aizawa, T. & Fukuda, T., 2012 1 1, Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012. Wiley-VCH Verlag, 巻 SPL. ISSUE. p. 739-742 4 p.

研究成果: Conference contribution

3 引用 (Scopus)

Microstructural analysis of low-cycle fatigue damage process of Sn-Ag-Cu solder joint

Kontani, H., Kariya, Y. & Fumikura, T., 2013, ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2013. 巻 1.

研究成果: Conference contribution

Micro-texturing onto amorphous carbon materials as a mold-die for micro-forming

Aizawa, T., 2013, Applied Mechanics and Materials. 巻 289. p. 23-37 15 p. (Applied Mechanics and Materials; 巻数 289).

研究成果: Conference contribution

9 引用 (Scopus)

Motion-controlled precise stamping for microtexturing onto aluminum sheet

Aizawa, T., Itoh, T., Tamaki, M. & Fukuda, T., 2014, Key Engineering Materials. Trans Tech Publications Ltd, 巻 622-623. p. 64-71 8 p. (Key Engineering Materials; 巻数 622-623).

研究成果: Conference contribution

Nanoscale pinning media in bulk melt-textured high-tc superconductors and their importance for super-magnet applications

Miryala, M., Sakai, N., Jirsa, M., Murakami, M. & Hirabayashi, I., 2009, Ceramic Engineering and Science Proceedings. 8 版 巻 29. p. 159-167 9 p.

研究成果: Conference contribution

Optimal chain length of peg to improve cytocompatibility of rgd/peg/ti material

Hanawa, T., Kurashima, K., Oya, K., Yusuketsustumi, A., Doi, H., Nomura, N. & Noda, K., 2011, 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials.

研究成果: Conference contribution

Pitting corrosion behavior and grain evolution of shot peened type 304 stainless steel

Widodo, T. D. & Noda, K., 2012, ECS Transactions. 37 版 巻 50. p. 273-277 5 p.

研究成果: Conference contribution

1 引用 (Scopus)

Plasma-nitriding assisted micro-texturing into stainless steel molds

Aizawa, T., Suga, H. & Yamaguchi, T., 2015 8 10, MATEC Web of Conferences. EDP Sciences, 巻 21. 09002

研究成果: Conference contribution

Plasma printing of micro-punch assembly for micro-embossing of aluminum sheets

Aizawa, T., Wasa, K., Farghali, A. & Tamagaki, H., 2018 1 1, Technology of Plasticity. Trans Tech Publications Ltd, p. 161-166 6 p. (Materials Science Forum; 巻数 920 MSF).

研究成果: Conference contribution

Potential distribution in resistivity measurement for nanorods formed by electron beam induced deposition

Takeguchi, M., Shimojo, M., Tanaka, M., Mitsuishi, M., Che, R., Zhang, W. & Furuya, K., 2005 12 1, Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference. p. 232-233 2 p. 1595299. (Digest of Papers - Microprocesses and Nanotechnology 2005: 2005 International Microprocesses and Nanotechnology Conference; 巻数 2005).

研究成果: Conference contribution

Preparation and Characterization of DyBa2Cu3Oy Thick Films with Dy2BaO4 Precursor

Kawata, S., Miryala, M., Inoue, K. & Murakami, M., 2015, Physics Procedia. Elsevier, 巻 65. p. 61-64 4 p.

研究成果: Conference contribution

1 引用 (Scopus)

Preparation of mono-dispersed droplet using ultrasonic

Arai, T., Imaizumi, K. & Takeda, K., 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (版). p. 989-992 4 p.

研究成果: Conference contribution

2 引用 (Scopus)

Quaternary alloy of Ni-Zn-Cu-P from hypophosphite based electroless deposition method

Zaimi, M. & Noda, K., 2013, ECS Transactions. 19 版 巻 45. p. 3-16 14 p.

研究成果: Conference contribution

3 引用 (Scopus)

Quenching characteristics of YBCO bulk contacts

Sawa, K., Fukuda, K., Ogawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2008 12 1, 2008 Proceedings of the 54th IEEE Holm Conference on Electrical Contacts, HOLM 2008. p. 319-324 6 p. 4694963. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts).

研究成果: Conference contribution

Reconstruction method for phase-shifting electron holography fitted with fresnel diffraction affected fringes

Lei, D., Mitsuishi, K., Shimojo, M. & Takeguchi, M., 2015, Applied Materials and Technologies. Trans Tech Publications Ltd, 巻 833. p. 215-221 7 p. (Materials Science Forum; 巻数 833).

研究成果: Conference contribution

Shape memory characteristics of Fe-30Mn-5Si-1Al and Fe28Mn-5Si-1 AI-5Cr alloys

Koyama, M., Murakami, M., Ogawa, K., Kikuchi, T. & Sawaguchi, S., 2008, SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies. p. 653-658 6 p.

研究成果: Conference contribution

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 8 10, MATEC Web of Conferences. EDP Sciences, 巻 21. 08002

研究成果: Conference contribution

Study of measuring method for corrosion behavior analysis in low concentration solution

Yagi, Y., Suzuki, R. & Noda, K., 2016 1 1, Corrosion General Poster Session. 26 版 Electrochemical Society Inc., 巻 75. p. 7-15 9 p.

研究成果: Conference contribution

Study on low-cycle fatigue testing and therrmal fatigue life prediction of electroplated copper thin film for through hole via

Watanabe, K., Yajima, N., Kariya, Y., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H., 2017 6 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., 1 p. 7947481

研究成果: Conference contribution

Surface potential distribution observation of the surface modified of 304 stainless steel

Widodo, T. D. & Noda, K., 2013, ECS Transactions. 38 版 Electrochemical Society Inc., 巻 58. p. 53-59 7 p.

研究成果: Conference contribution

Temperature dependence of fatigue crack propagation rate of pressureless sintered Ag nanoparticles

Kimura, R., Kariya, Y., Mizumura, N. & Sasaki, K., 2017 6 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., 1 p. 7947482

研究成果: Conference contribution

The force relaxation in levitating high Tc superconductor

Ito, E., Komano, Y., Sawa, K., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 3 31, AIP Conference Proceedings. 巻 824 II. p. 820-827 8 p.

研究成果: Conference contribution

The improvement of shape recovery property through training treatment in an Fe-30Mn-5Si-1Al

Koyama, M., Sawaguchi, T., Ogawa, K., Kikuchi, T. & Murakami, M., 2009, Proceedings of the International Conference on Martensitic Transformations, ICOMAT-08. p. 583-586 4 p.

研究成果: Conference contribution

1 引用 (Scopus)

Thermal fatigue damage of quad flat pack leads and Sn-3.5Ag-X (X=Bi and Cu) solder joints

Warashina, K., Kariya, Y., Hirata, Y. & Otsuka, M., 1999 1 1, Proceedings - 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign 1999. Institute of Electrical and Electronics Engineers Inc., p. 626-631 6 p. 747688

研究成果: Conference contribution

3 引用 (Scopus)

Thermal fatigue life evaluation of CSP joints by mechanical fatigue testing

Kanda, Y., Zama, K., Kariya, Y., Oota, H., Kikuchi, S., Yamabe, H. & Nakamura, K., 2010 8 9, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501291. (2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010).

研究成果: Conference contribution

1 引用 (Scopus)

Transformation of waste marigold flowers into porous carbons via hydrothermal carbonization

Chaiammart, N., Wongcharoen, S., Eiad-Ua, A., Ishizaki, T. & Panomsuwan, G., 2019 1 1, Green Convergence on Materials Frontiers II. Amornsakchai, T. (版). Trans Tech Publications Ltd, p. 23-29 7 p. (Key Engineering Materials; 巻数 824 KEM).

研究成果: Conference contribution

Visco-elastic effect of underfill material in reliability analysis of flip-chip package

Kanda, Y., Zama, K., Kariya, Y., Mikami, T., Kobayashi, T., Sato, T., Enomoto, T. & Hirata, K., 2010 6 25, Proceedings of the ASME InterPack Conference 2009, IPACK2009. p. 755-759 5 p. (Proceedings of the ASME InterPack Conference 2009, IPACK2009; 巻数 1).

研究成果: Conference contribution

1 引用 (Scopus)

Wet chemical synthesis of Ni-Al nanoparticles at ambient condition

Fadil, N. A., Govindachetty, S., Yoshikawa, H., Yamashita, Y., Ueda, S., Kobayashi, K., Tanabe, T., Hara, T., Gubbala, V. R., Murakami, H., Noda, K. & Abe, H., 2012, Advanced Materials Research. 巻 557-559. p. 442-447 6 p. (Advanced Materials Research; 巻数 557-559).

研究成果: Conference contribution