研究成果

フィルター
Conference contribution
2008

Corrosion behavior of type 304 and 316 stainless steels under stress loading environment

Suzuki, K. & Noda, K., 2008 12 1, ECS Transactions - Corrosion Posters (General) - 214th ECS Meeting/PRiME 2008. 48 版 p. 15-21 7 p. (ECS Transactions; 巻数 16, 番号 48).

研究成果: Conference contribution

Corrosion resistance evaluation of a functionally graded material using an electrochemical sensor

Saitoh, T., Kakefuda, K., Noda, K. & Watanabe, Y., 2008 3 13, Multiscale and Functionally Graded Materials - Proceedings of the International Conference, FGM IX. p. 965-970 6 p. (AIP Conference Proceedings; 巻数 973).

研究成果: Conference contribution

Degradation of solid polymer membrane in PEFC by hydrogen peroxide

Kato, S., Masahira, Y., Noda, K. & Imai, H., 2008 12 1, ECS Transactions - Corrosion Posters (General) - 214th ECS Meeting/PRiME 2008. 48 版 p. 1-5 5 p. (ECS Transactions; 巻数 16, 番号 48).

研究成果: Conference contribution

3 引用 (Scopus)

End corrosion of galvanized steels under atmospheric corrosion environment

Sekita, K., Hirano, T. & Noda, K., 2008 12 1, ECS Transactions - Corrosion Posters (General) - 214th ECS Meeting/PRiME 2008. 48 版 p. 7-13 7 p. (ECS Transactions; 巻数 16, 番号 48).

研究成果: Conference contribution

Influence of al concentration on deformation behavior and fracture mode of fe-30mn-6(SI, AL) alloys

Ogawa, K., Sawaguchi, T., Kikuchi, T., Koyama, M. & Murakami, M., 2008 12 1, SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies. p. 645-652 8 p. (SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies).

研究成果: Conference contribution

2 引用 (Scopus)

Localized corrosion behavior of austenitic stainless steels under stress loading environment

Noda, K. & Suzuki, K., 2008 12 1, ECS Transactions - Critical Factors in Localized Corrosion 6, in Honor of Professor Shibata - 214th ECS Meeting. 52 版 p. 239-246 8 p. (ECS Transactions; 巻数 16, 番号 52).

研究成果: Conference contribution

Quenching characteristics of YBCO bulk contacts

Sawa, K., Fukuda, K., Ogawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2008 12 1, 2008 Proceedings of the 54th IEEE Holm Conference on Electrical Contacts, HOLM 2008. p. 319-324 6 p. 4694963. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts).

研究成果: Conference contribution

Shape memory characteristics of Fe-30Mn-5Si-1Al and Fe28Mn-5Si-1 AI-5Cr alloys

Koyama, M., Murakami, M., Ogawa, K., Kikuchi, T. & Sawaguchi, S., 2008 12 1, SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies. p. 653-658 6 p. (SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies).

研究成果: Conference contribution

2007

A study on quenching characteristics of YBaCuO bulk superconductor with deposited Ag layer

Fukuda, K., Fujita, H., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2007 12 1, Electrical Contacts 2007: Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts. p. 76-81 6 p. 4318198. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts).

研究成果: Conference contribution

Calcium phosphate precipitation by galvanic current between titanium and gold in pseudo-body fluid

Kobayashi, E., Ogo, M., Doi, H., Yoneyama, T., Noda, K. & Hanawa, T., 2007 12 1, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 1 版 p. 653-656 4 p. (Materials Science Forum; 巻数 539-543, 番号 PART 1).

研究成果: Conference contribution

Controlled elasticity in nano-structured metallic glass by ion implantation method

Muraishi, S., Naito, H., Shi, J., Nakamura, Y. & Aizawa, T., 2007 12 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 版 p. 1315-1318 4 p. (Materials Science Forum; 巻数 561-565, 番号 PART 2).

研究成果: Conference contribution

Corrosion behavior of zirconium based alloys in simulated body fluids

Tsutsumi, Y., Takano, Y., Doi, H., Noda, K. & Hanawa, T., 2007 12 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 版 p. 1489-1492 4 p. (Materials Science Forum; 巻数 561-565, 番号 PART 2).

研究成果: Conference contribution

6 引用 (Scopus)

Effect of Ni addition on bending properties of Sn-Ag-Cu lead-free solder joints

Kobayashi, T., Kariya, Y., Sasaki, T., Tanaka, M. & Tatsumi, K., 2007 10 22, Proceedings - 57th Electronic Components and Technology Conference 2007, ECTC '07. p. 684-688 5 p. 4249956. (Proceedings - Electronic Components and Technology Conference).

研究成果: Conference contribution

7 引用 (Scopus)

Effects of cross-linkage and hydroxyl groups on bonding strength between titanium and segmented polyurethane through 3-(trimethoxysilyl) propyl methacrylate

Sakamoto, H., Hirohashi, Y., Doi, H., Noda, K. & Hanawa, T., 2007 12 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 版 p. 1477-1480 4 p. (Materials Science Forum; 巻数 561-565, 番号 PART 2).

研究成果: Conference contribution

Nano-graphitization in amorphous carbon films via electron beam irradiation and the iron implantation

Iwamura, E. & Aizawa, T., 2007 12 1, Self Assembly of Nanostructures Aided by Ion- or Photon-Beam Irradiation: Fundamentals and Applications. p. 105-111 7 p. (Materials Research Society Symposium Proceedings; 巻数 960).

研究成果: Conference contribution

1 引用 (Scopus)

Solid-state synthesis of Mg2X (X=Si, Ge, Sn and Pb) via bulk mechanical alloying

Aizawa, T. & Song, R., 2007 12 1, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 版 p. 221-224 4 p. (Materials Science Forum; 巻数 534-536, 番号 PART 1).

研究成果: Conference contribution

4 引用 (Scopus)

Thermoelectric material design in pseudo binary systems of Mg2Si - Mg2Ge - Mg2Sn on the powder metallurgy route

Aizawa, T., Song, R. & Yamamoto, A., 2007 12 1, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 2 版 p. 1553-1556 4 p. (Materials Science Forum; 巻数 534-536, 番号 PART 2).

研究成果: Conference contribution

2006

Contact resistance characteristics of high temperature superconducting bulk - Part V

Fujita, H., Fukuda, K., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 1 1, Electrical Contacts 2006: Proceedings of the 52nd IEEE Holm Conference on Electrical Contacts. Institute of Electrical and Electronics Engineers Inc., p. 124-130 7 p. 4063111. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts).

研究成果: Conference contribution

3 引用 (Scopus)

Contact resistance characteristics of YBaCuO superconductors with deposited metal layer

Fujita, H., Fukuda, K., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 12 1, 23rd International Conference on Electrical Contacts, ICEC 2006 - together with the 6th International Session on Electromechanical Devices, IS-EMD 2006. p. 390-395 6 p. (23rd International Conference on Electrical Contacts, ICEC 2006 - together with the 6th International Session on Electromechanical Devices, IS-EMD 2006).

研究成果: Conference contribution

1 引用 (Scopus)

Self-lubrication of machining tools in dry via in-situ formed tribofilms

Aizawa, T., Yamamoto, S. & Sumitomo, T., 2006 5 15, Materials Research Society Symposium Proceedings. p. 3-14 12 p. (Materials Research Society Symposium Proceedings; 巻数 890).

研究成果: Conference contribution

Surface amorphization in Zr alloy films via Ni implantation

Muraishi, S., Naito, H. & Aizawa, T., 2006 12 1, Surfaces and Interfaces in Nanostructured Materials II - Proceedings of Symposium sponsored by the Surface Engineering Committee of the Materials Processing and Manufacturing Division(MPMD)of The Mine. p. 23-27 5 p. (TMS Annual Meeting; 巻数 2006).

研究成果: Conference contribution

The force relaxation in levitating high Tc superconductor

Ito, E., Komano, Y., Sawa, K., Murakami, M., Sakai, N. & Hirabayashi, I., 2006 3 31, ADVANCES IN CRYOGENIC ENGINEERING: Transactions of the International Cryogenic Materials Conference, ICMC, Volume 52B. p. 820-827 8 p. (AIP Conference Proceedings; 巻数 824 II).

研究成果: Conference contribution

2005

Contact resistance characteristics of high temperature superconducting bulk- Part IV

Fujita, H., Imaizumi, T., Tomita, M., Sakai, N., Murakami, M., Hirabayashi, I. & Sawa, K., 2005 12 1, Electrical Contacts 2005 - Proceedings of the Fifty-First IEEE Holm Conference on Electrical Contacts. p. 272-276 5 p. 1518256. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts; 巻数 2005).

研究成果: Conference contribution

8 引用 (Scopus)

Fabrication of patterned domains with graphitic clusters in amorphous carbon using a combination of ion implantation and electron irradiation techniques

Iwamura, E. & Aizawa, T., 2005 1 1, Growth, Modification and Analysis by Ion Beams at the Nanoscale. Materials Research Society, p. 108-113 6 p. (Materials Research Society Symposium Proceedings; 巻数 908).

研究成果: Conference contribution

2 引用 (Scopus)
2004

Contact resistance characteristics of high temperature superconducting Bulk- III

Imaizumi, T., Yamamoto, N., Tomita, M., Sakai, N., Murakami, M., Hirabayashi, I. & Sawa, K., 2004 12 1, Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts. p. 416-420 5 p. (Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts).

研究成果: Conference contribution

8 引用 (Scopus)

Dynamic deformation of regularly cell-structured materials

Aizawa, T., Mukai, T., Kanahashi, H. & Suwa, Y., 2004 1 1, Explosion, Shock Wave and Hypervelocity Phenomena in Materials. Itoh, S., Hokamoto, K. & Fujita, M. (版). Trans Tech Publications Ltd, p. 13-20 8 p. (Materials Science Forum; 巻数 465-466).

研究成果: Conference contribution

1 引用 (Scopus)
2003

Dynamic response of the fuel safety experimental capsule under pressure wave and water hammer

Yoshie, S., Nakamura, T. & Aizawa, T., 2003 1 1, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 2, Part D, Symposia. Ogut, A., Tsuji, Y. & Kawahashi, M. (版). American Society of Mechanical Engineers, p. 3019-3026 8 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; 巻数 2 D).

研究成果: Conference contribution

Multiple-stripe pattern formation of Cr-Rich and CrN-rich alternative layers in the plasma nitriding of Fe-14Cr alloys

Granito, N., Aizawa, T. & Kuwahara, H., 2003 12 1, International Surface Engineering Congress - Proceedings of the 1st Congress. p. 29-38 10 p. (International Surface Engineering Congress - Proceedings of the 1st Congress).

研究成果: Conference contribution

Multi-scaled mechanical modeling for cellular materials

Aizawa, T., 2003 10 17, Mechanics and Material Engineering for Science and Experiments. Zhou, Y., Ghu, Y., Li, Z., Zhou, Y., Gu, Y. & Li, Z. (版). p. 68-71 4 p. (Mechanics and Material Engineering for Science and Experiments).

研究成果: Conference contribution

Plasma nitriding of aluminum without argon pre-sputtering

Visuttipitukul, P., Aizawa, T. & Kuwahara, H., 2003 12 1, International Surface Engineering Congress - Proceedings of the 1st Congress. p. 39-46 8 p. (International Surface Engineering Congress - Proceedings of the 1st Congress).

研究成果: Conference contribution

1 引用 (Scopus)

Solid state synthesis of magnesium base thermoelectric semi-conducting materials

Aizawa, T., Song, R., Kondoh, K., Yamamoto, A. & Obara, H., 2003 12 1, Processing and Fabrication of Advanced Materials XII. Srivatsan, T. S. & Varin, R. A. (版). p. 490-503 14 p. (Processing and Fabrication of Advanced Materials XII).

研究成果: Conference contribution

Tribological Properties of Magnesium Composite with In-situ Formed Mg 2Si Dispersoids

Kondoh, K., Oginuma, H. & Aizawa, T., 2003 12 1, Affordable Metal Matrix Composites for High Performance Applications II. Pandey, A. B., Kendig, K. L., Lewandowski, J. J. & Shah, S. S. (版). p. 91-101 11 p. (Materials Science and Technology 2003 Meeting).

研究成果: Conference contribution

Tribological properties of physical vapor deposited ZrN thin films

Mitsuo, A. & Aizawa, T., 2003 12 1, International Surface Engineering Congress - Proceedings of the 1st Congress. p. 127-130 4 p. (International Surface Engineering Congress - Proceedings of the 1st Congress).

研究成果: Conference contribution

2001

Nanostructured hydrogen storage materials via bulk mechanical alloying

Aizawa, T., Kuji, T. & Nakano, H., 2001 12 1, Processing and Fabrication of Advanced Materials X. Srivatsan, T. S., Varin, R. A., Srivatsan, T. S. & Varin, R. A. (版). p. 164-183 20 p. (Processing and Fabrication of Advanced Materials X).

研究成果: Conference contribution

2 引用 (Scopus)

Structural characteristics of Mg-Ni alloy films prepared by ion beam sputtering

Mitsuo, A. & Aizawa, T., 2001 12 1, Processing and Fabrication of Advanced Materials X. Srivatsan, T. S., Varin, R. A., Srivatsan, T. S. & Varin, R. A. (版). p. 121-127 7 p. (Processing and Fabrication of Advanced Materials X).

研究成果: Conference contribution

1 引用 (Scopus)
2000

Preparation of mono-dispersed droplet using ultrasonic

Arai, T., Imaizumi, K. & Takeda, K., 2000 12 1, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (版). p. 989-992 4 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

研究成果: Conference contribution

2 引用 (Scopus)
1999

Thermal fatigue damage of quad flat pack leads and Sn-3.5Ag-X (X=Bi and Cu) solder joints

Warashina, K., Kariya, Y., Hirata, Y. & Otsuka, M., 1999 1 1, Proceedings - 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign 1999. Institute of Electrical and Electronics Engineers Inc., p. 626-631 6 p. 747688

研究成果: Conference contribution

3 引用 (Scopus)

Thermal oxidation and characterization for surface layers of Al implanted TiN films

Mitsuo, A. & Aizawa, T., 1999 12 1, Proceedings of the International Conference on Ion Implantation Technology. IEEE, p. 865-868 4 p. (Proceedings of the International Conference on Ion Implantation Technology; 巻数 2).

研究成果: Conference contribution

1 引用 (Scopus)
1993

Nondestructive quality assurance of PVD/CVD ceramic coated WC/Co cermets

Aizawa, T., Itoh, M. & Kihara, J., 1993 12 1, Ceramic Coatings. Ramulu, M. & Komanduri, R. (版). Publ by ASME, p. 111-132 22 p. (American Society of Mechanical Engineers, Materials Division (Publication) MD; 巻数 44).

研究成果: Conference contribution

1 引用 (Scopus)

Non-Newtonian flowability evaluation of metallic powder binder compound in metal injection molding

Iwai, T., Aizawa, T. & Kihara, J., 1993 12 1, Developments in Non - Newtonian Flows. Siginer, D. A., VanArsdale, W. E., Altan, C. M. & Alexandrou, A. N. (版). Publ by ASME, p. 39-48 10 p. (American Society of Mechanical Engineers, Applied Mechanics Division, AMD; 巻数 175).

研究成果: Conference contribution

2 引用 (Scopus)
1992

Effect of initial density and detonation condition to explosive powder processing for Ti-Al intermetallics

Aizawa, T., Tamagawa, J., Tanaka, K. & Kihara, J., 1992 12 1, Particulate Materials and Processes. Publ by Metal Powder Industries Federation, p. 319-333 15 p. (Advances in Powder Metallurgy; 巻数 9).

研究成果: Conference contribution

Granular modeling of steel powder flow and compaction in injection molding

Aizawa, T., Iwai, T. & Kihara, J., 1992 12 1, Proc Powder Injection Molding Symp 92. Publ by Metal Powder Industries Federation, p. 419-433 15 p. (Proc Powder Injection Molding Symp 92).

研究成果: Conference contribution

5 引用 (Scopus)

Granular modeling simulator for powder compaction processes

Tamura, S., Aizawa, T. & Kihara, J., 1992 12 1, Compaction and Other Consolidation Processes. Publ by Metal Powder Industries Federation, p. 29-41 13 p. (Advances in Powder Metallurgy; 巻数 2).

研究成果: Conference contribution

10 引用 (Scopus)

Nondestructive evaluation of PVD/CVD TiN coated WC/Co by acoustic spectro-microscopy

Aizawa, T., Tsukahara, Y. & Kihara, J., 1992 12 1, Acousto-Optics and Acoustic Microscopy. Publ by ASME, p. 55-70 16 p. (American Society of Mechanical Engineers, Applied Mechanics Division, AMD; 巻数 140).

研究成果: Conference contribution

1 引用 (Scopus)

On-process tribosensing system to predict change of tractions with work reduction

Aizawa, T., Chihara, T. & Kihara, J., 1992 12 1, Sensors and Signal Processing for Manufacturing. Publ by ASME, p. 161-176 16 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; 巻数 55).

研究成果: Conference contribution

Powder forming design on the basis of granular modeling

Aizawa, T., Tamura, S. & Kihara, J., 1992 12 1, Computational Methods on Materials Processing. Publ by ASME, p. 31-45 15 p. (American Society of Mechanical Engineers, Materials Division (Publication) MD; 巻数 39).

研究成果: Conference contribution

1 引用 (Scopus)

Three-dimensional triangulation for forging and solidification designs

Aizawa, T. & Kihara, J., 1992 12 1, Concurrent Engineering - 1992. Publ by ASME, p. 1-16 16 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; 巻数 59).

研究成果: Conference contribution

1985

ANALYSIS OF FRACTURE PARAMETERS FOR BENDING-TYPE SPECIMENS.

Aizawa, T. & Yagawa, G., 1985, ASTM Special Technical Publication. ASTM, p. 197-213 17 p. (ASTM Special Technical Publication).

研究成果: Conference contribution

1984

FINITE ELEMENT ANALYSIS OF EQUILIBRIA OF IDEAL MHD PLASMAS IN TORUS REGIONS.

Kikuchi, F. & Aizawa, T., 1984 12 1, Finite Elements in Fluids. John Wiley & Sons, p. 311-323 13 p. (Finite Elements in Fluids; 巻数 5).

研究成果: Conference contribution

1 引用 (Scopus)
1981

NUMERICAL METHOD FOR PERTURBATION ANALYSIS OF EIGENVALUE PROBLEMS IN STRUCTURAL MECHANICS.

Kikuchi, F., Aizawa, T. & Utsuno, H., 1981 12 1, Transactions of the International Conference on Structural Mechanics in Reactor Technology. North-Holland Publ Co, for Comm of the Eur Communities (Eur 7146), Belg. Distrib in USA , 6. 3, (Transactions of the International Conference on Structural Mechanics in Reactor Technology).

研究成果: Conference contribution