芝浦工業大学

Conference contribution

Structural health monitoring based on laser excitation vibration test and wavelet transform

Cao, S., Kajiwara, I., Li, X. & Hosoya, N., 2018 2月 27, 2017 11th International Conference on Sensing Technology, ICST 2017. IEEE Computer Society, p. 1-6 6 p. 8304432. (Proceedings of the International Conference on Sensing Technology, ICST; vol. 2017-December).

研究成果: Conference contribution

1 被引用数 (Scopus)

Structural health monitoring by high-frequency vibration measurement with non-contact laser excitation

Kajiwara, I., Miyamoto, D., Hosoya, N. & Nishidome, C., 2011 5月 24, Health Monitoring of Structural and Biological Systems 2011. 79841K. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7984).

研究成果: Conference contribution

4 被引用数 (Scopus)

Structural materialization of stainless steel molds and dies by the low temperature high density plasma nitriding

Aizawa, T., Fukuda, T. & Morita, H., 2015 8月 10, 4th International Conference on New Forming Technology, ICNFT 2015. Yuan, S. J., Lin, J., Qin, Y., Dean, T. A. & Vollertsen, F. (eds.). EDP Sciences, 08002. (MATEC Web of Conferences; vol. 21).

研究成果: Conference contribution

1 被引用数 (Scopus)

Studies to decrease cogging force and pulsating thrust in the prototype linear permanent magnet vernier motor

Shimomura, S., Fujieda, M. & Hoshino, K., 2008 12月 1, Proceedings of the 11th International Conference on Electrical Machines and Systems, ICEMS 2008. p. 3417-3422 6 p. 4771357. (Proceedings of the 11th International Conference on Electrical Machines and Systems, ICEMS 2008).

研究成果: Conference contribution

15 被引用数 (Scopus)

STUDY FOR RE-ASR BEHAVIOUR OF RECYCLED CONCRETE USING ASR GENERATED CONCRETE AND CONSIDERING COUNTERMEASURE TECHNOLOGY

Iyoda, T. & Matsud, N., 2022 3月 3, fib International Conference on Concrete Sustainability 2021. Sojkova, K., Hajek, P. & Fiala, C. (eds.). Czech Technical University in Prague, p. 271-276 6 p. (Acta Polytechnica CTU Proceedings; vol. 33).

研究成果: Conference contribution

Open Access

Studying the effect of lecture content on students’ EEG data in classroom using SVD

Babiker, A., Faye, I., Malik, A. S. & Sato, H., 2019 1月 24, 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 200-204 5 p. 8626664. (2018 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2018 - Proceedings).

研究成果: Conference contribution

2 被引用数 (Scopus)

Study of a computer system for evaluation of bearing wall stresses in structural planning reasoning by neural network

Tsutsumi, K., Tani, A., Kawamura, H., Matsubayashi, T., Katoaka, H., Komono, K. & Fukusima, Y., 1993 1月 1, Computing in Civil and Building Engineering. Publ by ASCE, p. 817-824 8 p. (Computing in Civil and Building Engineering).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study of anisotropic black branes in asymptotically anti-de Sitter

Maeda, K., 2015, On Recent Developments in Theoretical and Experimental General Relativity, Astrophysics and Relativistic Field Theories. Jantzen, R. T., Rosquist, K., Ruffini, R. & Ruffini, R. (eds.). World Scientific, p. 1419-1421 3 p. (The 13th Marcel Grossmann Meeting: On Recent Developments in Theoretical and Experimental General Relativity, Astrophysics and Relativistic Field Theories - Proceedings of the MG13 Meeting on General Relativity, 2012; vol. 0).

研究成果: Conference contribution

Study of carbonation mechanism of blast-furnace slag cement with different carbon dioxide concentrations

Iyoda, T., Toyomura, E., Goto, S. & Asaga, K., 2015, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. Furuta, H., Frangopol, D. M. & Akiyama, M. (eds.). CRC Press/Balkema, p. 1686-1693 8 p. (Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study of desktop type external shoulder prosthesis control with bilateral servo system

Higashihara, T., Ohnishi, K., Komeda, T., Saito, Y. & Ohshima, T., 2012 12月 1, 2012 9th France-Japan and 7th Europe-Asia Congress on Mechatronics, MECATRONICS 2012 / 13th International Workshop on Research and Education in Mechatronics, REM 2012. p. 225-230 6 p. 6451013. (2012 9th France-Japan and 7th Europe-Asia Congress on Mechatronics, MECATRONICS 2012 / 13th International Workshop on Research and Education in Mechatronics, REM 2012).

研究成果: Conference contribution

Study of Empathy on Robot Expression Based on Emotion Estimated from Facial Expression and Biological Signals

Sripian, P., Kurono, Y., Yoshida, R. & Sugaya, M., 2019 10月, 2019 28th IEEE International Conference on Robot and Human Interactive Communication, RO-MAN 2019. Institute of Electrical and Electronics Engineers Inc., 8956353. (2019 28th IEEE International Conference on Robot and Human Interactive Communication, RO-MAN 2019).

研究成果: Conference contribution

5 被引用数 (Scopus)

Study of GSO scintillator for the LHCf upgrade

Kawade, K., Suzuki, T., Adriani, O., Bonechi, L., Bongi, M., Castellini, G., D'Alessandro, R., Fukatsu, K., Haguenauer, M., Itow, Y., Kasahara, K., Macina, D., Mase, T., Masuda, K., Matsubara, Y., Menjo, H., Mitsuka, G., Muraki, Y., Nakai, M., Noda, K., & 12 othersPapini, P., Perrot, A. L., Ricciarini, S., Sako, T., Shimizu, Y., Suzuki, K., Taki, K., Tamura, T., Torii, S., Tricomi, A., Turner, W. C. & Yoshida, K., 2011, International Symposium on the Recent Progress of Ultra-High Energy Cosmic Ray Observation. p. 220-223 4 p. (AIP Conference Proceedings; vol. 1367).

研究成果: Conference contribution

Study of High Speed SRM Using Vector Control for Electric Vehicle

Aiso, K., Takahashi, M. & Akatsu, K., 2019 5月, ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia. Institute of Electrical and Electronics Engineers Inc., 8797052. (ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study of high-speed SRM with amorphous steel sheet for EV

Ueta, K. & Akatsu, K., 2017 1月 30, 19th International Conference on Electrical Machines and Systems, ICEMS 2016. Institute of Electrical and Electronics Engineers Inc., 7837228

研究成果: Conference contribution

7 被引用数 (Scopus)

Study of High-speed SRM with Amorphous steel sheet for EV

Tomioka, T. & Akatsu, K., 2019 8月, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8922014. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

研究成果: Conference contribution

2 被引用数 (Scopus)

Study of high torque density interior permanent magnet synchronous motor with flexible orientation Nd₂Fe₁₄B sintered magnet

Akune, R., Akatsu, K., Fujihara, M. & Yamamoto, T., 2016 11月 2, Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016. Institute of Electrical and Electronics Engineers Inc., p. 578-584 7 p. 7732584. (Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016).

研究成果: Conference contribution

7 被引用数 (Scopus)

Study of Inverter Integrated SRM with Vector Control

Matsumoto, M. & Akatsu, K., 2018 11月 27, ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems. Institute of Electrical and Electronics Engineers Inc., p. 1169-1174 6 p. 8549077. (ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems).

研究成果: Conference contribution

Study of iron loss in Induction Motor made with Soft Magnetic Composite core based on Finite Element Analysis

Matsumoto, T., Shimomura, S. & Morimoto, M., 2010, 2010 International Power Electronics Conference - ECCE Asia -, IPEC 2010. p. 270-277 8 p. 5542278. (2010 International Power Electronics Conference - ECCE Asia -, IPEC 2010).

研究成果: Conference contribution

6 被引用数 (Scopus)

Study of low energy micro ehd pump by designed electric field

Sato, T., Maeda, S. & Yamanishi, Y., 2018 12月, MHS 2018 - 2018 29th International Symposium on Micro-NanoMechatronics and Human Science. Institute of Electrical and Electronics Engineers Inc., 8886968. (MHS 2018 - 2018 29th International Symposium on Micro-NanoMechatronics and Human Science).

研究成果: Conference contribution

2 被引用数 (Scopus)

Study of Magnetic Circuit to Estimate Air Gap Magnetic Flux Density and Output Torque in Spoke Type Permanent Magnet Vernier Machine

Takahashi, H. & Shimomura, S., 2020 11月 24, 23rd International Conference on Electrical Machines and Systems, ICEMS 2020. Institute of Electrical and Electronics Engineers Inc., p. 894-897 4 p. 9291161. (23rd International Conference on Electrical Machines and Systems, ICEMS 2020).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study of measuring method for corrosion behavior analysis in low concentration solution

Yagi, Y., Suzuki, R. & Noda, K., 2016, Corrosion General Poster Session. Buchheit, R. & Virtanen, S. (eds.). 26 ed. Electrochemical Society Inc., p. 7-15 9 p. (ECS Transactions; vol. 75, no. 26).

研究成果: Conference contribution

Study of morphogenesis of a large-span roof that satisfies its form design requirements: Two-purpose evaluation of image and mechanical rationality

Takeda, Y. & Tsutsumi, K., 2011 9月 27, FUZZ 2011 - 2011 IEEE International Conference on Fuzzy Systems - Proceedings. p. 1763-1766 4 p. 6007341. (IEEE International Conference on Fuzzy Systems).

研究成果: Conference contribution

Study of Operator's Line of Sight in Unmanned Construction Systems

Hashimoto, T., Yamauchi, G., Fujino, K., Yuta, S. & Tateyama, K., 2018 9月 19, 2018 IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2018. Institute of Electrical and Electronics Engineers Inc., 8468635. (2018 IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2018).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study of Switched Reluctance Motor Directly Driven by Commercial Three-phase Power Supply

Takahashi, M., Aiso, K. & Akatsu, K., 2018 10月 22, 2018 International Power Electronics Conference, IPEC-Niigata - ECCE Asia 2018. Institute of Electrical and Electronics Engineers Inc., p. 3186-3191 6 p. 8507682. (2018 International Power Electronics Conference, IPEC-Niigata - ECCE Asia 2018).

研究成果: Conference contribution

Study of switching method for MATRIX motor realizing variable characteristic

Sakai, Y., Hijikata, H., Akatsu, K., Miyama, Y. & Arita, H., 2016 7月 13, 2016 IEEE 8th International Power Electronics and Motion Control Conference, IPEMC-ECCE Asia 2016. Institute of Electrical and Electronics Engineers Inc., p. 3012-3017 6 p. 7512776

研究成果: Conference contribution

4 被引用数 (Scopus)

Study of the drive-timing for a standup motion-supporting mechanism for the elderly

Nomura, S., Nakanishi, N., Matsuhira, N., Oogawara, T., Yoshimi, T. & Nakamoto, H., 2017 1月 24, ICCAS 2016 - 2016 16th International Conference on Control, Automation and Systems, Proceedings. IEEE Computer Society, p. 526-530 5 p. 7832370

研究成果: Conference contribution

Study of variable reluctance vernier motor for hybrid electric vehicle

Takano, M. & Shimomura, S., 2013 9月 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 1341-1347 7 p. 6579284. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

研究成果: Conference contribution

6 被引用数 (Scopus)

Study on a Proper Repair Cycle of Finishing Materials in Condominiums

Ide, T., Hamasaki, H. & Soga, Y., 2020, Current Topics and Trends on Durability of Building Materials and Components - Proceedings of the 15th International Conference on Durability of Building Materials and Components, DBMC 2020. Serrat, C., Casas, J. R. & Gibert i Armengol, V. (eds.). International Center for Numerical Methods in Engineering, p. 183-190 8 p. (Current Topics and Trends on Durability of Building Materials and Components - Proceedings of the 15th International Conference on Durability of Building Materials and Components, DBMC 2020).

研究成果: Conference contribution

Open Access

1 被引用数 (Scopus)

Study on bearing performance for inching worm locomotion using characteristics of wheel subsidence on loose soil

Fujiwara, D. & Iizuka, K., 2018 8月 30, AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 930-935 6 p. 8452437. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2018-July).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study on built-in cushion with relief valve for pneumatic cylinder

Kawakami, Y., Satoh, K., Nakano, K. & Bando, T., 1999 12月 1, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control (ISFP'99). Zuwen, W., Junwei, H., Songjing, L., Yaoming, X., Manlin, Z., Zuwen, W., Junwei, H., Songjing, L., Yaoming, X. & Manlin, Z. (eds.). p. 359-364 6 p. (Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control (ISFP'99)).

研究成果: Conference contribution

4 被引用数 (Scopus)

Study on Connection between Vibration and Resistance Force from Loose Soil for Leg Typed Rovers

Watanabe, T. & Iizuka, K., 2020 9月 23, 2020 59th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2020. Institute of Electrical and Electronics Engineers Inc., p. 1399-1403 5 p. (2020 59th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2020).

研究成果: Conference contribution

Study on Departure Time Choice of Tourism Purpose Trips with the Perception of Predicted Near-future Traffic Condition-An Experiment Using a Mobile Application

Le, Y., Aoyagi, S., Shimizu, T. & Takahashi, K., 2020 9月, 2020 IEEE 5th International Conference on Intelligent Transportation Engineering, ICITE 2020. Institute of Electrical and Electronics Engineers Inc., p. 141-145 5 p. 9231518. (2020 IEEE 5th International Conference on Intelligent Transportation Engineering, ICITE 2020).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study on Displaying Images to Prevent VR Sickness as Maintaining Rich-Presence

Okuno, S. & Shimizu, S., 2022, 2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia. Institute of Electrical and Electronics Engineers Inc., p. 268-273 6 p. (2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia).

研究成果: Conference contribution

Study on driver distraction indexes using biological signals applying assessment of information display

Ohkura, M., Takahashi, N., Seki, H., Saito, Y. & Hasegawa, K., 2013, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, V02AT02A044. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2 A).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study on effectiveness of vibrating wheel's shape for improving running performance of small planetary exploration rovers with wheels on loose ground

Watanabe, T. & Iizuka, K., 2021, 2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021. Institute of Electrical and Electronics Engineers Inc., p. 122-129 8 p. (2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study on environment conscious technologies at a super tall building: Basic examination of dynamic draft skin system by steady CFD analysis

Matsushita, T., Akimoto, T., Inomata, R., Hatori, D., Takanishi, S. & Nakamura, S., 2020, 16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020. International Society of Indoor Air Quality and Climate, (16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020).

研究成果: Conference contribution

Study on estimation technique of hydration on concrete in the mold by electrical resistance value

Ota, M. & Iyoda, T., 2017, Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure - 5th International Symposium on Life-Cycle Engineering, IALCCE 2016. CRC Press/Balkema, p. 1342-1352 11 p.

研究成果: Conference contribution

Study on evaluation of kawaii colors using visual analog scale

Komatsu, T. & Ohkura, M., 2011 7月 19, Human Interface and the Management of Information: Interacting with Information - Symposium on Human Interface 2011, Held as Part of HCI International 2011, Proceedings. PART 1 ed. p. 103-108 6 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6771 LNCS, no. PART 1).

研究成果: Conference contribution

9 被引用数 (Scopus)

Study on high frequency inverter with 100kHz current feedback control by using FPGA

Amano, S. & Akatsu, K., 2014 1月 1, 2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014. Institute of Electrical and Electronics Engineers Inc., p. 3392-3397 6 p. 7014078. (2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014).

研究成果: Conference contribution

2 被引用数 (Scopus)

Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2016, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

Kimura, T., Sawa, T. & Kamijyo, T., 2017, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).

研究成果: Conference contribution

Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

Kimura, T., Kamijo, T. & Sawa, T., 2016 1月 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study on improvement of accuracy in end mill machining

Iso, S., Toida, N., Ikeda, N., Kobayashi, Y., Shirai, K. & Tozawa, K., 2007 12月 1, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).

研究成果: Conference contribution

Study on low-cycle fatigue testing and therrmal fatigue life prediction of electroplated copper thin film for through hole via

Watanabe, K., Yajima, N., Kariya, Y., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H., 2017 6月 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., p. 85 1 p. 7947481. (Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017).

研究成果: Conference contribution

Study on multi-sensor unit for monitoring of living space environment and classification of daily activities

Hirasawa, K. & Saitoh, A., 2009 12月 1, 2009 IEEE/SICE International Symposium on System Integration: SI International 2008 - The 2nd Symposium on System Integration. p. 101-106 6 p. 5384549. (2009 IEEE/SICE International Symposium on System Integration: SI International 2008 - The 2nd Symposium on System Integration).

研究成果: Conference contribution

3 被引用数 (Scopus)

Study on Relationship between Traveling State and Chassis Strain at Traveling Loose Soil for Rovers

Inaba, K. & Iizuka, K., 2021, 2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021. Institute of Electrical and Electronics Engineers Inc., p. 136-141 6 p. (2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021).

研究成果: Conference contribution

Study on the Applicability Considering on the Relationship between Shape and Flexibility of the Adsorption Gripper Tip

Ofuchi, A., Fujiwara, D. & Iizuka, K., 2022, 2022 7th International Conference on Control and Robotics Engineering, ICCRE 2022. Institute of Electrical and Electronics Engineers Inc., p. 43-46 4 p. (2022 7th International Conference on Control and Robotics Engineering, ICCRE 2022).

研究成果: Conference contribution

Study on the coexistence of two types of PLCs in HF band

Suzuki, A., Senda, K. & Inoue, M., 2009 9月 25, 2009 Digest of Technical Papers International Conference on Consumer Electronics, ICCE 2009. 5012276. (Digest of Technical Papers - IEEE International Conference on Consumer Electronics).

研究成果: Conference contribution

1 被引用数 (Scopus)

Study on the Use of Virtual Synchronous Generators to Improve Large Scale System's Stability

Li, D., Sitompul, S. & Fujita, G., 2021, 2021 3rd International Conference on High Voltage Engineering and Power Systems, ICHVEPS 2021. Institute of Electrical and Electronics Engineers Inc., p. 367-371 5 p. (2021 3rd International Conference on High Voltage Engineering and Power Systems, ICHVEPS 2021).

研究成果: Conference contribution

Study on traveling performance for robots equipped with wheel-base length variable mechanism to traveling loose soil with slope

Fujiwara, D. & Iizuka, K., 2017, 19th International and 14th European-African Regional Conference of the ISTVS. Kiss, P. & Mathe, L. (eds.). International Society for Terrain Vehicle Systems, (19th International and 14th European-African Regional Conference of the ISTVS).

研究成果: Conference contribution

芝浦工業大学

研究成果

検索結果