芝浦工業大学

研究成果

年別の研究成果 1970 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022

• 11058 Article
• 2492 Conference contribution
• 504 Conference article
• 340 Paper
• 342 その他
  • 94 Chapter
  • 78 Review article
  • 57 Editorial
  • 25 Comment/debate
  • 19 Meeting Abstract
  • 16 Exhibition
  • 12 Book
  • 10 Letter
  • 9 Patent
  • 7 Abstract
  • 5 Foreword/postscript
  • 5 Poster
  • 3 Short survey
  • 1 Chapter (peer-reviewed)
  • 1 Discussion paper

年別の研究成果

年別の研究成果

検索結果

• 1800

  CAL: A Constraint Logic Programming Language and Its Enhancement for Application to Hondling Robots

  A.Aiba, A. A., S.Sato, S. S., S.Terasaki, S. T., M.Sakata, M. S., K.Machida, K. M. & Aiba, A., 1800, In: ICOT Technical Report. p. 0729

  研究成果: Article › 査読

• CAL: A Theoretical Background of Constraint Logic Programming and Its Application (Revised)

  Sakai, K. & Aiba, A., 1800, In: ICOT Technical Report.

  研究成果: Article › 査読

• Carsten Bundgaard and Yoshihide Horiuchi, "Report on the 'Building of Cultures' International Seminar."

  Bundgaard, C. & Horiuchi, Y., 1800, In: Default journal. 6(1993), p. 15-20

  研究成果: Article › 査読

• Characterization of cementite films prepared by electron-shower-assisted PVD method.

  S.J.Li, S. J. L., Ishihara, M., Yumoto, H., Aizawa, T. & Shimotomai, M., 1800, In: Thin Solid Films.. 316 (1998), p. 100-104

  研究成果: Article › 査読

• Characterization of hydrogen storage alloy Mg2Co synthesized by bulk mechanical alloying.

  Wang, Y. J., Aizawa, T. & Nishimura, C., 1800, In: J. Metastable and Nanocrystalline Materials.. 24-25 (2005), p. 343-346

  研究成果: Article › 査読

• Chemical modification of titanium nitride films via ion implantation.

  Aizawa, T., A.Mitsuo, A. M. & Akhadejdamrong, T., 1800, In: Materials Transactions.. 44 [10] (2003), p. 1962-1970

  研究成果: Article › 査読

• "CISV Learner Report Findings at CISV Japan Branch.″

  Horiuchi, Y., 1800, In: Interspectives: A Journal of Transcultural and Peace Education. 10(1991), p. 15-18

  研究成果: Article › 査読

• "Communications Methods for Design of Conversations: Some Cultural Perspectives."

  Banathy, B. A., Banathy, B. H., Dyer, G., Harris, H., Hammond, D., Horiuchi, Y., Jenks, L., Pointe, G. L., Lee, I-S., Minati, G. & Osakabe, A., 1800, In: Default journal. 8(1995), p. 97-115

  研究成果: Article › 査読

• Compositional dependent amorphization in Zr alloy films by means of Ni-implantation.

  Muraishi, S., Naito, H. & Aizawa, T., 1800, In: Materials Transactions.. 46 (12) (2005), p. 2751-2754

  研究成果: Article › 査読

• Compressive deformation simulation of regularly cell-structured materials with various column connectivity.

  Tantikom, K. & Aizawa, T., 1800, In: Materials Transactions.. 46 [6] (2005), p. 1154-1160

  研究成果: Article › 査読

• Computational study of compressive mechanical response in two-dimensional cellular solids under microstructural control.

  Suwa, Y., Mukai, T. & Aizawa, T., 1800, In: Materials Transactions.. 46 [6] (2005), p. 1221-1229

  研究成果: Article › 査読

• Computing Soft Constraints by Hierarchical Constraint Logic Programming

  Satoh, K. & Aiba, A., 1800, In: ICOT Technical Report.

  研究成果: Article › 査読

• Controlled elasticity in nano-structured metallic glass by ion implantation method..

  Muraishi, S., Naito, H., Shi, J., Y, Y., Nakamura, N. & Aizawa, T., 1800, In: Mater. Sci. Forum. 561-565 (2007), p. 1315-1318

  研究成果: Article › 査読

• Controlled fracture forming of metal/alpha-alumina composite wires.

  Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Default journal. 42 (1995), p. 655-660

  研究成果: Article › 査読

• Coupled, macro-micro modeling for hot deformation and sintering.

  Aizawa, T., Prawato, Y. & Tsumori, F., 1800, In: J. Computational and Applied Mathematics.. 149 (2002), p. 307-324

  研究成果: Article › 査読

• Coupled multilevel modeling for hot deformation and sintering.

  Aizawa, T. & Tsumori, F., 1800, In: Key Engineering Materials.. 180 (2000), p. 661-666

  研究成果: Article › 査読

• Critical issues in promotion of environmentally benign manufacturing and materials processing.

  Aizawa, T., Halada, K. & Gutowski, T. G., 1800, In: Materials Transactions.. 43 [3] (2002), p. 390-396

  研究成果: Article › 査読

• Crystallographic anisotropy control of n-type Bi-Te-Se thermoelectric material via bulk mechanical alloying and shear extrusion.

  Kim, S. S. & Aizawa, T., 1800, In: Materials Transaction.. 45 [3] (2004), p. 918-924

  研究成果: Article › 査読

• Densification and Resintering Behavior of Alumina Compacts Processed by Controlled Fracture Forming.

  W.B, W. B., Du, D., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Default journal. 45 (1998), p. 145-151

  研究成果: Article › 査読

• "Design of a Conversation."

  Collen, A., Dyer, G., Frantz, T. G., Gotwald, A., Horiuchi, Y., Rowl, G. & Schwammle, U., 1800, In: Default journal. 7(1995), p. 43-52

  研究成果: Article › 査読

• "Disseminating Tacit Knowing of Design Conversation."

  Horiuchi, Y., 1800, In: Systems Practice and Action Research. 17(2004), p. 341-53

  研究成果: Article › 査読

• Dry small hole shearing of cold rolled steel sheet with electroconductive ceramic tools

  Tamaoki, K., Aizawa, T., Manabe, M. & Kataoka, S., 1800, In: J. Steel Research International. 46, p. 825-828

  研究成果: Article › 査読

• Dynamic deformation of regularly cell-structured materials.

  Aizawa, T., Mukai, T., Kanahashi, H. & Suwa, Y., 1800, In: Materials Science Forum.. 465-466 (2004), p. 13-22

  研究成果: Article › 査読

• Effect of cell size on the dynamic compressive properties of open-celled aluminum foams.

  Kanahashi, H., Mukai, T., Nieh, T. G., Aizawa, T. & Higashi, K., 1800, In: Materials Transactions.. 43 [10] (2002), p. 2548-2553

  研究成果: Article › 査読

• Effect of extrusion conditions on properties of hot extruded Mg composite with Mg2Si dispersions via solid-state synthesis

  Tsuzuki, R., Du, W., Kondoh, K., Aizawa, T. & Yuasa, E., 1800, In: Materials Science Forum.. 419-422 (2003), p. 789-794

  研究成果: Article › 査読

• Effect of processing parameters on thermoelectric properties of p-type (Bi2Te3)0.25 (Sb2Te3)0.75 prepared via BMA-HP method.

  Yang, J. Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In: Materials Chemistry and Physics.. 70 (2001), p. 90-94

  研究成果: Article › 査読

• Effects of cell geometry on the compressive properties of nickel foam.

  Yamada, Y., Wen, C., Shimojima, K., Mabuchi, M., Nakamura, M., Asahina, T., Aizawa, T. & Higashi, K., 1800, In: Materials Transactions.. 41 [9] (2000), p. 1136-1138

  研究成果: Article › 査読

• Effects of magnetically controlled microgravity and hypergravity environment on amphibian behavior

  Y., F., K, K., M, N., T, S., N., F., H, H., K, S., K, K., T., Y., Y., T., A., K. & Shinkai, T., 1800, In: Space Utiliz. Res..

  研究成果: Article › 査読

• Ellipsometric characterization on multi-layered thin film systems during hydrogenation.

  Santjojo, D. J., Aizawa, T. & Muraishi, S., 1800, In: Materials Transactions. 48, p. 1380-1386

  研究成果: Article › 査読

• Environmentally benign fabricating process of magnesium alloy by cyclic plastic working in solid-state.

  Kondoh, K. & Aizawa, T., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1276-1283

  研究成果: Article › 査読

• Environmentally benign manufacturing of automotive parts via powder metallurgy.

  Fujiki, A., Kojima, H. & Aizawa, T., 1800, In: Materials Transaction.. 43 [3] (2002), p. 348-351

  研究成果: Article › 査読

• Estimation of mean acoustic reflection coefficient of polycrystalline aggregate.

  Ihara, I., Aizawa, T., Koguchi, H. & Kihara, J., 1800, In: Applied Physics Letters.. 66 (1995), p. 956-958

  研究成果: Article › 査読

• Experimental and theoretical evaluation on thermoelectricity for SPS-joined p-n module in Bi-Te system.

  Kim, S. S., Yamamoto, S., Aizawa, T. & Yamamoto, A., 1800, In: Materials Transactions.. 46 [7] (2005), p. 1506-1513

  研究成果: Article › 査読

• Experimental study for improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure.

  H.Kanahashi, H. K., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M., Aizawa, T. & Higashi, K., 1800, In: Materials Science and Engineering.. A 308 (2001), p. 283-287

  研究成果: Article › 査読

• Fabrication of CrN/Cr2N bulk composites and their mechanical properties.

  Aizawa, T., Kuwahara, H. & Tamura, M., 1800, In: J. American Ceramic Society.. 85 (2002)., p. 61-64

  研究成果: Article › 査読

• Fabrication of nanostructured titanium thin films via N ion implantation and post-annealing treatment.

  Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In: Surface Coating Technology.. 188-189 (2004), p. 260-264

  研究成果: Article › 査読

• Fabrication of Ni-sheathed nickel aluminide wires from mechanically alloyed precursors.

  Aizawa, T. & Kihara, J., 1800, In: Materials Science and Engineering.. A239-240 (1997), p. 522-531

  研究成果: Article › 査読

• Fabrication of SUS 304 regularly cell-structured materials and their mechanical properties.

  Tantikom, K., Kanahashi, H., Yamamoto, S. & Aizawa, T., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1290-1294

  研究成果: Article › 査読

• Feasibility of plasma nitriding for effective surface treatment of pure aluminum.

  Visuttipitukul, P., Aizawa, T. & Kuwahara, H., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1412-1418

  研究成果: Article › 査読

• Forging characteristics of AZ31 Mg alloy.

  Chino, Y., Mabuchi, M., Shimojima, K., Yamada, Y., Wen, C., Miwa, K., Nakamura, M., Higashi, K. & Aizawa, T., 1800, In: Materials Transactions.. 42 [3] (2001), p. 414-417

  研究成果: Article › 査読

• Formation of protection layer during oxidation of Al-implanted TiN coating.

  Akhadejdamrong, T., Iwamoto, C., Ikuhara, Y., Mitsuo, A. & Aizawa, T., 1800, In: Materials Transactions.. 43 [6] (2002), p. 1291-1297

  研究成果: Article › 査読

• "Formulating a Transcultural Design Inquiring System Using Japanese Cultural Values in a Japanese Setting."

  Dyer, G., Horiuchi, Y., Pointe, G. L., Lee, I-S., Minati, G., Osakabe, A. & Snow, R., 1800, In: Default journal. 9(1996), p. 1-15

  研究成果: Article › 査読

• "Future Life-long Learning: A Provisional Model for the Creation of Value."

  Brown, S., Chroust, G., Dyer, G., Horiuchi, Y., Metcalf, G., Rhee, M., Rhee, Y. P., Rowl, G. & Tagliaferri, C., 1800, In: Default journal. 11(1998), p. 59-68

  研究成果: Article › 査読

• Gas nitriding of magnesium - titanium alloys fabricated by bulk mechanical alloying.

  Luangvaranunt, T., Visuttipitukul, P., Kondoh, K., Kuwahara, H. & Aizawa, T., 1800, In: Materials Transactions.. 42 (2001), p. 1312-1316

  研究成果: Article › 査読

• Grain Boundary Characterization and Evaluation by Acoustic Spectro Microscopy.

  Xu, Y. & Aizawa, T., 1800, In: Ceramic Transaction.. 89 (1998), p. 205-216

  研究成果: Article › 査読

• Granular Modeling Approach to Electro-Packaging Materials.

  Aizawa, T., Iwai, T. & Kihara, J., 1800, In: J. Mechanics of Materials.. (1998), p. 83-91

  研究成果: Article › 査読

• High speed bulk mechanical alloying of Cu/Ag/Co systems.

  Kobayashi, O., Aizawa, T. & Kihara, J., 1800, In: Materials Transactions, JIM. 37 (1996) 1497-1504..

  研究成果: Article › 査読

• Hydrogen absorption and electrochemical properties of Mg2-xNi (x = 0 - 0.5) alloys prepared by bulk mechanical alloying..

  Kuji, T., Nakano, H. & Aizawa, T., 1800, In: J. Alloys and Compounds. 330-332 (2002), p. 590-596

  研究成果: Article › 査読

• Hydrogen absorption of nanocrystalline palladium.

  Kuji, T., Matsumura, Y., Uchida, H. & Aizawa, T., 1800, In: J. Alloys and Compounds.. 330-332 (2002), p. 718-722

  研究成果: Article › 査読

• "Idealized Systems Design for Making Japanese University Students Better International Communicators,"

  Horiuchi, Y., 1800, In: Default journal. 9(1996), p. 17-23

  研究成果: Article › 査読