芝浦工業大学

研究成果

年別の研究成果 1970 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022

• 11088 Article
• 2515 Conference contribution
• 508 Conference article
• 342 Paper
• 349 その他
  • 98 Chapter
  • 80 Review article
  • 56 Editorial
  • 26 Comment/debate
  • 19 Meeting Abstract
  • 16 Exhibition
  • 12 Book
  • 10 Letter
  • 9 Patent
  • 7 Abstract
  • 6 Foreword/postscript
  • 5 Poster
  • 3 Short survey
  • 1 Chapter (peer-reviewed)
  • 1 Discussion paper

年別の研究成果

年別の研究成果

検索結果

• 1800

  "Disseminating Tacit Knowing of Design Conversation."

  Horiuchi, Y., 1800, In: Systems Practice and Action Research. 17(2004), p. 341-53

  研究成果: Article › 査読

• Dry small hole shearing of cold rolled steel sheet with electroconductive ceramic tools

  Tamaoki, K., Aizawa, T., Manabe, M. & Kataoka, S., 1800, In: J. Steel Research International. 46, p. 825-828

  研究成果: Article › 査読

• Dynamic deformation of regularly cell-structured materials.

  Aizawa, T., Mukai, T., Kanahashi, H. & Suwa, Y., 1800, In: Materials Science Forum.. 465-466 (2004), p. 13-22

  研究成果: Article › 査読

• Effect of cell size on the dynamic compressive properties of open-celled aluminum foams.

  Kanahashi, H., Mukai, T., Nieh, T. G., Aizawa, T. & Higashi, K., 1800, In: Materials Transactions.. 43 [10] (2002), p. 2548-2553

  研究成果: Article › 査読

• Effect of extrusion conditions on properties of hot extruded Mg composite with Mg2Si dispersions via solid-state synthesis

  Tsuzuki, R., Du, W., Kondoh, K., Aizawa, T. & Yuasa, E., 1800, In: Materials Science Forum.. 419-422 (2003), p. 789-794

  研究成果: Article › 査読

• Effect of processing parameters on thermoelectric properties of p-type (Bi2Te3)0.25 (Sb2Te3)0.75 prepared via BMA-HP method.

  Yang, J. Y., Aizawa, T., Yamamoto, A. & Ohta, T., 1800, In: Materials Chemistry and Physics.. 70 (2001), p. 90-94

  研究成果: Article › 査読

• Effects of cell geometry on the compressive properties of nickel foam.

  Yamada, Y., Wen, C., Shimojima, K., Mabuchi, M., Nakamura, M., Asahina, T., Aizawa, T. & Higashi, K., 1800, In: Materials Transactions.. 41 [9] (2000), p. 1136-1138

  研究成果: Article › 査読

• Effects of magnetically controlled microgravity and hypergravity environment on amphibian behavior

  Y., F., K, K., M, N., T, S., N., F., H, H., K, S., K, K., T., Y., Y., T., A., K. & Shinkai, T., 1800, In: Space Utiliz. Res..

  研究成果: Article › 査読

• Ellipsometric characterization on multi-layered thin film systems during hydrogenation.

  Santjojo, D. J., Aizawa, T. & Muraishi, S., 1800, In: Materials Transactions. 48, p. 1380-1386

  研究成果: Article › 査読

• Environmentally benign fabricating process of magnesium alloy by cyclic plastic working in solid-state.

  Kondoh, K. & Aizawa, T., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1276-1283

  研究成果: Article › 査読

• Environmentally benign manufacturing of automotive parts via powder metallurgy.

  Fujiki, A., Kojima, H. & Aizawa, T., 1800, In: Materials Transaction.. 43 [3] (2002), p. 348-351

  研究成果: Article › 査読

• Estimation of mean acoustic reflection coefficient of polycrystalline aggregate.

  Ihara, I., Aizawa, T., Koguchi, H. & Kihara, J., 1800, In: Applied Physics Letters.. 66 (1995), p. 956-958

  研究成果: Article › 査読

• Experimental and theoretical evaluation on thermoelectricity for SPS-joined p-n module in Bi-Te system.

  Kim, S. S., Yamamoto, S., Aizawa, T. & Yamamoto, A., 1800, In: Materials Transactions.. 46 [7] (2005), p. 1506-1513

  研究成果: Article › 査読

• Experimental study for improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure.

  H.Kanahashi, H. K., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M., Aizawa, T. & Higashi, K., 1800, In: Materials Science and Engineering.. A 308 (2001), p. 283-287

  研究成果: Article › 査読

• Fabrication of CrN/Cr2N bulk composites and their mechanical properties.

  Aizawa, T., Kuwahara, H. & Tamura, M., 1800, In: J. American Ceramic Society.. 85 (2002)., p. 61-64

  研究成果: Article › 査読

• Fabrication of nanostructured titanium thin films via N ion implantation and post-annealing treatment.

  Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In: Surface Coating Technology.. 188-189 (2004), p. 260-264

  研究成果: Article › 査読

• Fabrication of Ni-sheathed nickel aluminide wires from mechanically alloyed precursors.

  Aizawa, T. & Kihara, J., 1800, In: Materials Science and Engineering.. A239-240 (1997), p. 522-531

  研究成果: Article › 査読

• Fabrication of SUS 304 regularly cell-structured materials and their mechanical properties.

  Tantikom, K., Kanahashi, H., Yamamoto, S. & Aizawa, T., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1290-1294

  研究成果: Article › 査読

• Feasibility of plasma nitriding for effective surface treatment of pure aluminum.

  Visuttipitukul, P., Aizawa, T. & Kuwahara, H., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1412-1418

  研究成果: Article › 査読

• Forging characteristics of AZ31 Mg alloy.

  Chino, Y., Mabuchi, M., Shimojima, K., Yamada, Y., Wen, C., Miwa, K., Nakamura, M., Higashi, K. & Aizawa, T., 1800, In: Materials Transactions.. 42 [3] (2001), p. 414-417

  研究成果: Article › 査読

• Formation of protection layer during oxidation of Al-implanted TiN coating.

  Akhadejdamrong, T., Iwamoto, C., Ikuhara, Y., Mitsuo, A. & Aizawa, T., 1800, In: Materials Transactions.. 43 [6] (2002), p. 1291-1297

  研究成果: Article › 査読

• "Formulating a Transcultural Design Inquiring System Using Japanese Cultural Values in a Japanese Setting."

  Dyer, G., Horiuchi, Y., Pointe, G. L., Lee, I-S., Minati, G., Osakabe, A. & Snow, R., 1800, In: Default journal. 9(1996), p. 1-15

  研究成果: Article › 査読

• "Future Life-long Learning: A Provisional Model for the Creation of Value."

  Brown, S., Chroust, G., Dyer, G., Horiuchi, Y., Metcalf, G., Rhee, M., Rhee, Y. P., Rowl, G. & Tagliaferri, C., 1800, In: Default journal. 11(1998), p. 59-68

  研究成果: Article › 査読

• Gas nitriding of magnesium - titanium alloys fabricated by bulk mechanical alloying.

  Luangvaranunt, T., Visuttipitukul, P., Kondoh, K., Kuwahara, H. & Aizawa, T., 1800, In: Materials Transactions.. 42 (2001), p. 1312-1316

  研究成果: Article › 査読

• Grain Boundary Characterization and Evaluation by Acoustic Spectro Microscopy.

  Xu, Y. & Aizawa, T., 1800, In: Ceramic Transaction.. 89 (1998), p. 205-216

  研究成果: Article › 査読

• Granular Modeling Approach to Electro-Packaging Materials.

  Aizawa, T., Iwai, T. & Kihara, J., 1800, In: J. Mechanics of Materials.. (1998), p. 83-91

  研究成果: Article › 査読

• High speed bulk mechanical alloying of Cu/Ag/Co systems.

  Kobayashi, O., Aizawa, T. & Kihara, J., 1800, In: Materials Transactions, JIM. 37 (1996) 1497-1504..

  研究成果: Article › 査読

• Hydrogen absorption and electrochemical properties of Mg2-xNi (x = 0 - 0.5) alloys prepared by bulk mechanical alloying..

  Kuji, T., Nakano, H. & Aizawa, T., 1800, In: J. Alloys and Compounds. 330-332 (2002), p. 590-596

  研究成果: Article › 査読

• Hydrogen absorption of nanocrystalline palladium.

  Kuji, T., Matsumura, Y., Uchida, H. & Aizawa, T., 1800, In: J. Alloys and Compounds.. 330-332 (2002), p. 718-722

  研究成果: Article › 査読

• "Idealized Systems Design for Making Japanese University Students Better International Communicators,"

  Horiuchi, Y., 1800, In: Default journal. 9(1996), p. 17-23

  研究成果: Article › 査読

• Identification of Zinc Finger Proteins Bound to a Silencer Region in the Rat Glutathione Transferase P Gene.

  Tanabe, A., Oshima, K., Osada, S., Nishihara, T. & Imagawa, M., 1800, In: Biol. Pharm. Bull.. 24, p. 970-974

  研究成果: Article › 査読

• Improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure.

  Kanahashi, H., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M. & Aizawa, T., 1800, In: Materials Science and Engineering. A308 (2001), p. 283-287

  研究成果: Article › 査読

• Improvement of crashworthiness in ultra light-weight metallic foam by heat-treatment for microstructural modification of base material.

  Kanahashi, H., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M. & Aizawa, T., 1800, In: Materials Transactions.. 42 [10] (2001), p. 2087-2092

  研究成果: Article › 査読

• Improvement of friction and wear performance of titanium nitride films by chlorine ion implantation.

  Mitsuo, A. & Aizawa, T., 1800, In: materials transactions, jim. 40 [12] (1999), p. 1361-1366

  研究成果: Article › 査読

• Influence of powder compaction and milling media on the formation of molybdenum disilicide by mechanically induced self-propagating reaction.

  Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: J. American Ceramic Society.. 79 (1996), p. 2221-2223

  研究成果: Article › 査読

• In-situ solid-state synthesis of Mg2Si/MgO/Mg composites.

  Du, W., Kondoh, K., Yuasa, E., Tsuzuki, R. & Aizawa, T., 1800, In: Materials Science Forum.. 419-422 (2003), p. 783-788

  研究成果: Article › 査読

• In-situ synthesis of Mg2Si intermetallics via powder metallurgy process.

  Kondoh, K., Oginuma, H., Matsukawa, S. & Aizawa, T., 1800, In: Materials Transactions.. 44 [5] (2003), p. 981-985

  研究成果: Article › 査読

• Introduction to CAL (Extended Abstract)

  Sakai, K. & Aiba, A., 1800, In: ＩＣＯＴ　Ｔｅｃｈｎｉｃａｌ　Ｍｅｍｏ　ＴＭ０４.

  研究成果: Article › 査読

• "It's a Small World Idea Book Team: 1999 Asilomar Summary."

  Horiuchi, Y., Jenks, L. & Park, S-H., 1800, In: Default journal. 12(2000), p. 55-62

  研究成果: Article › 査読

• "It's a Small World Ideabook Team "Into the Rabbit Hole" Board Game Status Report: A Spiral Connecting 2002 and 2003 ISI Asilomar Conversations."

  Devon, C., Gill, P., Jenks, L. & Horiuchi, Y., 1800, In: Default journal. 16(2003), p. 101-10

  研究成果: Article › 査読

• Laser shock loading device for real time evaluation of shock induced reaction.

  Ito, K. & Aizawa, T., 1800, In: J. Materials Processing Technology.. 85 (1998), p. 91-96

  研究成果: Article › 査読

• Leaky pseudo surface wave on the water - Si (110) interface.

  Xu, Y. & Aizawa, T., 1800, In: Physical Letters.. A 260 (1999), p. 512-515

  研究成果: Article › 査読

• Low temperature sintering of dense alumina wire by green microstructure control.

  Du, W., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Proc. 2000 Powder Metallurgy World Congress..

  研究成果: Article › 査読

• Magnesium matrix composite with solid-state synthesized Mg2Si dispersoids.

  Kondoh, K., Oginuma, H., Tsuzuki, R. & Aizawa, T., 1800, In: Materials Transactions.. 44 [4] (2003), p. 611-618

  研究成果: Article › 査読

• Magnetic powder forming simulation subjected to pressing in magnetic Field.

  Tamura, S., Aizawa, T. & Kihara, J., 1800, In: Default journal. 45 (1994), p. 353-358

  研究成果: Article › 査読

• Measurement of ultrasonic attenuation in material surface layer by spectroscopy technique with ultrasonic reflectivity measurement.

  Ihara, I., Aizawa, T., Koguchi, H. & Kihara, J., 1800, In: JSME International Journal.. (1995), p. 393-402

  研究成果: Article › 査読

• Mechanical alloying behavior in molybdenum-silicon system.

  Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: Materials Science Forum.. 235 (1997), p. 157-162

  研究成果: Article › 査読

• Mechanically Induced Reaction for Solid-State Synthesis of Mg2Si and Mg2Sn

  Aizawa, T. & Song, R., 1800, In: J. Intermetallics. p. 382-391

  研究成果: Article › 査読

• Mechanical properties of bulk sintered titanium nitride ceramics.

  Kuwahara, H., Mazaki, N., Takahashi, M., Watanabe, T., Yang, X. & Aizawa, T., 1800, In: Materials Science and Engineering.. A 319-321 (2001), p. 687-691

  研究成果: Article › 査読

• Mesoscopic Modeling for Superplasticity.

  mechanics, I. T., equation, T. S., method, T. E., modeling., A. M. & Aizawa, T., 1800, In: Materials Science Forum.. 233-234 (1997), p. 37-46

  研究成果: Article › 査読