芝浦工業大学

研究成果

年別の研究成果 1970 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023

• 11225 Article
• 2597 Conference contribution
• 536 Conference article
• 339 Paper
• 375 その他
  • 108 Chapter
  • 88 Review article
  • 59 Editorial
  • 29 Comment/debate
  • 19 Meeting Abstract
  • 16 Exhibition
  • 13 Book
  • 11 Letter
  • 9 Patent
  • 7 Abstract
  • 6 Foreword/postscript
  • 5 Poster
  • 3 Short survey
  • 1 Chapter (peer-reviewed)
  • 1 Discussion paper

年別の研究成果

年別の研究成果

検索結果

• 1800

  Experimental study for improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure.

  H.Kanahashi, H. K., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M., Aizawa, T. & Higashi, K., 1800, In: Materials Science and Engineering.. A 308 (2001), p. 283-287

  研究成果: Article › 査読

• Fabrication of CrN/Cr2N bulk composites and their mechanical properties.

  Aizawa, T., Kuwahara, H. & Tamura, M., 1800, In: J. American Ceramic Society.. 85 (2002)., p. 61-64

  研究成果: Article › 査読

• Fabrication of nanostructured titanium thin films via N ion implantation and post-annealing treatment.

  Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In: Surface Coating Technology.. 188-189 (2004), p. 260-264

  研究成果: Article › 査読

• Fabrication of Ni-sheathed nickel aluminide wires from mechanically alloyed precursors.

  Aizawa, T. & Kihara, J., 1800, In: Materials Science and Engineering.. A239-240 (1997), p. 522-531

  研究成果: Article › 査読

• Fabrication of SUS 304 regularly cell-structured materials and their mechanical properties.

  Tantikom, K., Kanahashi, H., Yamamoto, S. & Aizawa, T., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1290-1294

  研究成果: Article › 査読

• Feasibility of plasma nitriding for effective surface treatment of pure aluminum.

  Visuttipitukul, P., Aizawa, T. & Kuwahara, H., 1800, In: Materials Transactions.. 44 [7] (2003), p. 1412-1418

  研究成果: Article › 査読

• Forging characteristics of AZ31 Mg alloy.

  Chino, Y., Mabuchi, M., Shimojima, K., Yamada, Y., Wen, C., Miwa, K., Nakamura, M., Higashi, K. & Aizawa, T., 1800, In: Materials Transactions.. 42 [3] (2001), p. 414-417

  研究成果: Article › 査読

• Formation of protection layer during oxidation of Al-implanted TiN coating.

  Akhadejdamrong, T., Iwamoto, C., Ikuhara, Y., Mitsuo, A. & Aizawa, T., 1800, In: Materials Transactions.. 43 [6] (2002), p. 1291-1297

  研究成果: Article › 査読

• "Formulating a Transcultural Design Inquiring System Using Japanese Cultural Values in a Japanese Setting."

  Dyer, G., Horiuchi, Y., Pointe, G. L., Lee, I-S., Minati, G., Osakabe, A. & Snow, R., 1800, In: Default journal. 9(1996), p. 1-15

  研究成果: Article › 査読

• "Future Life-long Learning: A Provisional Model for the Creation of Value."

  Brown, S., Chroust, G., Dyer, G., Horiuchi, Y., Metcalf, G., Rhee, M., Rhee, Y. P., Rowl, G. & Tagliaferri, C., 1800, In: Default journal. 11(1998), p. 59-68

  研究成果: Article › 査読

• Gas nitriding of magnesium - titanium alloys fabricated by bulk mechanical alloying.

  Luangvaranunt, T., Visuttipitukul, P., Kondoh, K., Kuwahara, H. & Aizawa, T., 1800, In: Materials Transactions.. 42 (2001), p. 1312-1316

  研究成果: Article › 査読

• Grain Boundary Characterization and Evaluation by Acoustic Spectro Microscopy.

  Xu, Y. & Aizawa, T., 1800, In: Ceramic Transaction.. 89 (1998), p. 205-216

  研究成果: Article › 査読

• Granular Modeling Approach to Electro-Packaging Materials.

  Aizawa, T., Iwai, T. & Kihara, J., 1800, In: J. Mechanics of Materials.. (1998), p. 83-91

  研究成果: Article › 査読

• High speed bulk mechanical alloying of Cu/Ag/Co systems.

  Kobayashi, O., Aizawa, T. & Kihara, J., 1800, In: Materials Transactions, JIM. 37 (1996) 1497-1504..

  研究成果: Article › 査読

• Hydrogen absorption and electrochemical properties of Mg2-xNi (x = 0 - 0.5) alloys prepared by bulk mechanical alloying..

  Kuji, T., Nakano, H. & Aizawa, T., 1800, In: J. Alloys and Compounds. 330-332 (2002), p. 590-596

  研究成果: Article › 査読

• Hydrogen absorption of nanocrystalline palladium.

  Kuji, T., Matsumura, Y., Uchida, H. & Aizawa, T., 1800, In: J. Alloys and Compounds.. 330-332 (2002), p. 718-722

  研究成果: Article › 査読

• "Idealized Systems Design for Making Japanese University Students Better International Communicators,"

  Horiuchi, Y., 1800, In: Default journal. 9(1996), p. 17-23

  研究成果: Article › 査読

• Identification of Zinc Finger Proteins Bound to a Silencer Region in the Rat Glutathione Transferase P Gene.

  Tanabe, A., Oshima, K., Osada, S., Nishihara, T. & Imagawa, M., 1800, In: Biol. Pharm. Bull.. 24, p. 970-974

  研究成果: Article › 査読

• Improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure.

  Kanahashi, H., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M. & Aizawa, T., 1800, In: Materials Science and Engineering. A308 (2001), p. 283-287

  研究成果: Article › 査読

• Improvement of crashworthiness in ultra light-weight metallic foam by heat-treatment for microstructural modification of base material.

  Kanahashi, H., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M. & Aizawa, T., 1800, In: Materials Transactions.. 42 [10] (2001), p. 2087-2092

  研究成果: Article › 査読

• Improvement of friction and wear performance of titanium nitride films by chlorine ion implantation.

  Mitsuo, A. & Aizawa, T., 1800, In: materials transactions, jim. 40 [12] (1999), p. 1361-1366

  研究成果: Article › 査読

• Influence of powder compaction and milling media on the formation of molybdenum disilicide by mechanically induced self-propagating reaction.

  Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: J. American Ceramic Society.. 79 (1996), p. 2221-2223

  研究成果: Article › 査読

• In-situ solid-state synthesis of Mg2Si/MgO/Mg composites.

  Du, W., Kondoh, K., Yuasa, E., Tsuzuki, R. & Aizawa, T., 1800, In: Materials Science Forum.. 419-422 (2003), p. 783-788

  研究成果: Article › 査読

• In-situ synthesis of Mg2Si intermetallics via powder metallurgy process.

  Kondoh, K., Oginuma, H., Matsukawa, S. & Aizawa, T., 1800, In: Materials Transactions.. 44 [5] (2003), p. 981-985

  研究成果: Article › 査読

• Introduction to CAL (Extended Abstract)

  Sakai, K. & Aiba, A., 1800, In: ＩＣＯＴ　Ｔｅｃｈｎｉｃａｌ　Ｍｅｍｏ　ＴＭ０４.

  研究成果: Article › 査読

• "It's a Small World Idea Book Team: 1999 Asilomar Summary."

  Horiuchi, Y., Jenks, L. & Park, S-H., 1800, In: Default journal. 12(2000), p. 55-62

  研究成果: Article › 査読

• "It's a Small World Ideabook Team "Into the Rabbit Hole" Board Game Status Report: A Spiral Connecting 2002 and 2003 ISI Asilomar Conversations."

  Devon, C., Gill, P., Jenks, L. & Horiuchi, Y., 1800, In: Default journal. 16(2003), p. 101-10

  研究成果: Article › 査読

• Laser shock loading device for real time evaluation of shock induced reaction.

  Ito, K. & Aizawa, T., 1800, In: J. Materials Processing Technology.. 85 (1998), p. 91-96

  研究成果: Article › 査読

• Leaky pseudo surface wave on the water - Si (110) interface.

  Xu, Y. & Aizawa, T., 1800, In: Physical Letters.. A 260 (1999), p. 512-515

  研究成果: Article › 査読

• Low temperature sintering of dense alumina wire by green microstructure control.

  Du, W., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In: Proc. 2000 Powder Metallurgy World Congress..

  研究成果: Article › 査読

• Magnesium matrix composite with solid-state synthesized Mg2Si dispersoids.

  Kondoh, K., Oginuma, H., Tsuzuki, R. & Aizawa, T., 1800, In: Materials Transactions.. 44 [4] (2003), p. 611-618

  研究成果: Article › 査読

• Magnetic powder forming simulation subjected to pressing in magnetic Field.

  Tamura, S., Aizawa, T. & Kihara, J., 1800, In: Default journal. 45 (1994), p. 353-358

  研究成果: Article › 査読

• Measurement of ultrasonic attenuation in material surface layer by spectroscopy technique with ultrasonic reflectivity measurement.

  Ihara, I., Aizawa, T., Koguchi, H. & Kihara, J., 1800, In: JSME International Journal.. (1995), p. 393-402

  研究成果: Article › 査読

• Mechanical alloying behavior in molybdenum-silicon system.

  Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: Materials Science Forum.. 235 (1997), p. 157-162

  研究成果: Article › 査読

• Mechanically Induced Reaction for Solid-State Synthesis of Mg2Si and Mg2Sn

  Aizawa, T. & Song, R., 1800, In: J. Intermetallics. p. 382-391

  研究成果: Article › 査読

• Mechanical properties of bulk sintered titanium nitride ceramics.

  Kuwahara, H., Mazaki, N., Takahashi, M., Watanabe, T., Yang, X. & Aizawa, T., 1800, In: Materials Science and Engineering.. A 319-321 (2001), p. 687-691

  研究成果: Article › 査読

• Mesoscopic Modeling for Superplasticity.

  mechanics, I. T., equation, T. S., method, T. E., modeling., A. M. & Aizawa, T., 1800, In: Materials Science Forum.. 233-234 (1997), p. 37-46

  研究成果: Article › 査読

• Microscopic determination of surface wave velocities in heat treated steels by ultrasonic reflectivity measurement.

  Ihara, I., Aizawa, T. & Kihara, J., 1800, In: Nondestructive Characterization of Materials.. VI (1994), p. 87-95

  研究成果: Article › 査読

• Microstructure evolution and superplasticity of rolled Mg-9Al-1Zn.

  Mohri, T., Mabuchi, M., Nakamura, M., Asahina, T., Iwasaki, S., Aizawa, T. & Higashi, K., 1800, In: Materials Science and Engineering.. A290 (2000), p. 139-144

  研究成果: Article › 査読

• Microstructure model for hot deformation and creep behavior on the basis of homogenization theory.

  Aizawa, T., Tsumori, F. & Prawato, Y., 1800, In: Advanced Technology of Plasticity.. 2 (2002), p. 1213-1218

  研究成果: Article › 査読

• Micro-XPS analysis of slide-tested TiN films with/without Cl+ implantation.

  Yoshitake, M., Akhadejdamrong, T., Aizawa, T. & Yoshihara, K., 1800, In: Surface and Interface Analysis.. 34 (2002), p. 698-702

  研究成果: Article › 査読

• Modeling creep damage based on the real microstructure.

  Prawato, Y. & Aizawa, T., 1800, In: J. Practical Failure Analysis.. 2 [6] (2002), p. 68-79

  研究成果: Article › 査読

• Morphology-free processing of magnesium alloys.

  Kondoh, K., Luangvaranunt, T. & Aizawa, T., 1800, In: Materials Transactions..

  研究成果: Article › 査読

• MR2719766

  Kameko, M., 1800, In: Mathematical Reviews.

  研究成果: Article › 査読

• Nano-crystallization by high speed mechanical alloying.

  Aizawa, T. & Kihara, J., 1800, In: Powder Metallurgy World Congress-94.. (1994), p. 1357-1360

  研究成果: Article › 査読

• Nano-granulation in Co-Cu system by bulk mechanical alloying.

  Aizawa, T., Cheng, Z., Tokumitsu, K. & Kihara, J., 1800, In: Materials Science and Engineering.. A239-240 (1997), p. 233-241

  研究成果: Article › 査読

• Nanogranulation process into magnetoresistant Co-Cu alloy on the route of bulk mechanical alloying.

  Aizawa, T. & Zhoh, C., 1800, In: Materials Science and Engineering.. A285 (2000), p. 1-7

  研究成果: Article › 査読

• Nano-structured materials via bulk mechanical alloying..

  Aizawa, T. & Kondoh, K., 1800, In: Scripta Materiala. 44 (2001), p. 1751-1755

  研究成果: Article › 査読

• NATIONAL GARDEN PARK DEVELOPMENT PROJECT

  Isamu Koike, I. K. & Taniguchi, T., 1800, In: Default journal.

  研究成果: Article › 査読

• Nondestructive evaluation of Co agglomeration and WC growth in WC/Co superhard alloys.

  Aizawa, T. & Kihara, J., 1800, In: Nondestructive Characterization of Materials.. VI (1994), p. 575-583

  研究成果: Article › 査読