• 233 引用
  • 8 h指数
1988 …2018

年単位の研究成果

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

  • 233 引用
  • 8 h指数
  • 66 Article
  • 3 Conference contribution
  • 3 Conference article
フィルター
Article
2018
4 引用 (Scopus)
2017
2016
2015
1 引用 (Scopus)
2014
3 引用 (Scopus)
公開
2 引用 (Scopus)
2012

Comparing Compressive and Tensile strength of Sintered Steels for Automotive Parts

Fujiki, A., Yoshida, A. & uHirose, N., 2012 10 17, : : PM2012 CD. 1, p. 1-5

研究成果: Article

2011
1 引用 (Scopus)
2010

New PM partsfor VVEL(variable valve event and lift system)

Kawase, K., Abe, T., Tsuruta, S., Kaminaga, T., Akasaka, Y., Yamada, Y. & Fujiki, A., 2010 10 11, : : 2010 PM World Congress Proceeding. CD

研究成果: Article

Quantative analysis of die wall lubrication and new lubricant development

Fujiki, A., Maekawa, Y. & Adachi, K., 2010 6 1, : : Fenmo Yejin Jishu/Powder Metallurgy Technology. 28, 3, p. 230-234 5 p.

研究成果: Article

Poisson's ratio of sintered materials for structural machine parts

Norimitsu, H., Junichi, A., Akira, F. & Kazuya, O., 2009 6 1, : : Fenmo Yejin Jishu/Powder Metallurgy Technology. 27, 3, p. 226-232 7 p.

研究成果: Article

2007
1 引用 (Scopus)
2006

Development of Co-free exhaust valve seat insert for automotive engines

Fujiki, A., Miyazawa, T., Oyanagi, M., Fujitsuka, H. & Kawata, H., 2006 2 1, : : Fenmo Yejin Jishu/Powder Metallurgy Technology. 24, 1, p. 18-23 6 p.

研究成果: Article

3 引用 (Scopus)
公開

Tougher valve seats use two hard particles but no cobalt

Fujiki, A., Oyanagi, M., Miyazawa, T., Fujitsuka, H. & Kawata, H., 2005 4, : : Metal Powder Report. 60, 4, p. 20-22 3 p.

研究成果: Article

4 引用 (Scopus)
公開
8 引用 (Scopus)

The Development of a Cobalt-Free ExhaustValve Seat Insert

H.Fujitsuka, H. F., H.Kawata, H. K., M.Oyanagi, M. O., T.Miyazawa, T. M. & Fujiki, A., 2004 3 9, : : SAE TECHNICAL PAPER SERIES.

研究成果: Article

The development of Cobalt-free exhaust valve seat insert

Fujiki, A., fujitsuka, H., kawata, H., oyanagi, M. & miyazawa, T., 2004 3 21, : : SAE Technical Paper Series 2004-01-0502.

研究成果: Article

The Development of cobalt-free exhaust valve seat insert material for automotive engines

Fujiki, A., oyanagi, M., miyazawa, T., kawata, H., hayashi, K. & fujitsuka, H., 2004 10 19, : : Default journal.

研究成果: Article

2003

Development of cobalt -free exhaust valve seat insert material for automotive engines

Fujiki, A., oyanagi, M., miyazawa, T., kawata, H., hayashi, K. & fujitsuka, H., 2003 10 9, : : Trans. of the Material Reserch Soc. of Japan. 29, p. 1861-1866

研究成果: Article

Development of warm compacted P/M sprockets for automotive engines

Fujiki, A., Kojima, H., Maekawa, Y., Yamaguchi, M., Murata, T., Sugaya, Y., Iwakiri, M. & Shibano, T., 2003 2 1, : : Fenmo Yejin Jishu/Powder Metallurgy Technology. 21, 1, p. 14-18 5 p.

研究成果: Article

1 引用 (Scopus)

Investigation of high saturation magnetization of low rare-earth content α-Fe/Nd2Fe14B bulk exchange-spring magnets

Ono, H., Tayu, T., Waki, N., Sugiyama, T., Shimada, M., Kanou, M., Fujiki, A., Yamamoto, H., Takasugi, K. & Tani, M., 2003 4 1, : : Journal of Applied Physics. 93, 7, p. 4060-4065 6 p.

研究成果: Article

6 引用 (Scopus)

Investigation of high saturation magnetization of low rare-earth content α-Fe-/Nd2Fe14B bulk exchange-spring magnets

H.ono, H. O., T.Tayu, T. T., Waki, N., T.Sugaya, T. S., M.Shimada, M. S., M.Kanou, M. K., H.Yamamoto, H. Y., K.Takasugi, K. T., Tani, M. & Fujiki, A., 2003 4 1, : : Journal of Applied Physics. 93, p. 4060-4065

研究成果: Article

6 引用 (Scopus)

Properties ofα-Fe/Nd2Fe14B-Type Nd-Fe-C0-V-B System Bulk Exchange-Spring Magnets Prepared by Spark Plasma Sintering

H.ono, H. O., T.Tayu, T. T., N.Waki, N. W., T.Sugiyama, T. S., M.shimada, M. S., Mkanou, M., H.Yamamoto, H. Y., M.tani, M. T. & Fujiki, A., 2003 7 1, : : IEEE TRANSACTION OF MAGNETICS. 39, p. 2081-2088

研究成果: Article

8 引用 (Scopus)

Properties of α-Fe/Nd2Fe14B-type Nd-Fe-Co-V-B system bulk exchange-spring magnets prepared by spark plasma sintering

Ono, H., Tayu, T., Waki, N., Sugiyama, T., Shimada, M., Kanou, M., Fujiki, A., Yamamoto, H. & Tani, M., 2003 7 1, : : IEEE Transactions on Magnetics. 39, 4 II, p. 2081-2088 8 p.

研究成果: Article

8 引用 (Scopus)
2002
公開

Environmentally benign manufacturing of automotive parts via powder metallurgy

Fujiki, A., Kojima, H. & Aizawa, T., 2002 3, : : Materials Transactions. 43, 3, p. 348-351 4 p.

研究成果: Article

公開
3 引用 (Scopus)

Magnetic properties of low rare-earth content (Nd = 2 - 7 at.%) α-Fe/Nd2Fe14B type bulk exchange-spring magnets

Ono, H., Tayu, T., Waki, N., Sugiyama, T., Shimada, M., Kanou, M., Fujiki, A., Yamamoto, H., Takasugi, K. & Tani, M., 2002 2, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 49, 2, p. 141-145 5 p.

研究成果: Article

公開
2001
32 引用 (Scopus)

Producing Automotive Parts Using an Environmentally Friendly P/M Process

Fujiki, A., kojima, H. & aizawa, T., 2001 10 2, : : Journal of Advanced Science. 13, p. 353-355

研究成果: Article

2000

Development of high fatigue strength powder for high stress parts

yoshida, M., tanaka, H., aoki, T., hasegawa, Y. & Fujiki, A., 2000 11 15, : : Default journal. 1, p. 141-144

研究成果: Article

Isotropic Bulk Exchange -Spring Magnets with 134kJ/m3 Prepared by Spark Plasma Sintering Method

ono, H., norihisa, W., shimada, M., sugiyama, T., yamamoto, H. & Fujiki, A., 2000 11 12, : : IEEE TRANSACTION ON MAGNETICS. 37, p. 2552-2554

研究成果: Article

公開
1 引用 (Scopus)

Young's Modulus of sintered materials for structural machine parts

Huang, H-N., Fujiki, A., Yang, J., Goto, M. & watanabe, T., 2000 11 15, : : Default journal. 1, p. 1598-1601

研究成果: Article

1999

Development of under-cut shape sprocket forming by CNC press

Hirao, T., Fujiki, A., Saitou, M., Umegaki, S. & Katagiri, T., 1999 5, : : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 46, 5, p. 548-553 6 p.

研究成果: Article

公開
2 引用 (Scopus)
公開
1998

Japanese automotive PM faces up to the competition

Fujiki, A., 1998 1, : : Metal Powder Report. 53, 1, p. 30-33 4 p.

研究成果: Article

1 引用 (Scopus)