• 255 引用
  • 7 h指数
1985 …2020

年単位の研究成果

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

1985

Research and Development of C/C Composites using Bulk Mesophase

OKURA, A. & Anzai, M., 1985 12 1, : : Transaction ISIJ. 25, p. B375

研究成果: Article

1990

Automatic Polishing of 3-D Mold Surface by Magnetic Abrasive

ANZAI, M., MASAKI, K. & NAKAGAWA, T., 1990 5 1, : : Default journal. (1990.5), p. 184-191

研究成果: Article

公開
3 引用 (Scopus)
公開
2 引用 (Scopus)
1 引用 (Scopus)
公開
1991
公開
3 引用 (Scopus)

Preparation of Magnetic Abrasives by Mechanical Alloying and Its Finishing Properties

Anzai, M., Sudo, T., Endo, H., Otaki, H. & Nakagawa, T., 1991 1 1, : : Journal of the Japan Society of Powder and Powder Metallurgy. 38, 1, p. 55-58 4 p.

研究成果: Article

公開
1 引用 (Scopus)
1992

Automatic Polishing of Mold Surface by Magnetic Abrasive Finishing

ANZAI, M., SUDO, T. & NAKAGAWA, T., 1992 9 1, : : Default journal. (1992.9), p. 144-153

研究成果: Article

Magnetic Finishing of WC-Co Alloy Using Diamond Paste

Anzai, M., Sudo, T., Otaki, H., Obana, T. & Nakagawa, T., 1992 12, : : Journal of the Japan Society of Powder and Powder Metallurgy. 39, 6, p. 510-514 5 p.

研究成果: Article

1 引用 (Scopus)

Production of Zinc Back-up. Stainless Steel Replicated Mold by Arc Spray and Metallizing Process,

ANZAI, M., ENDO, H. & NAKAGAWA, T., 1992 9 1, : : Default journal. (1992.9), p. 212-220

研究成果: Article

1993

Magnetic Abrasive Finishing of WC-Co Curved Surface

ANZAI, M., KAWASHIMA, E., OTAKI, H. & NAKAGAWA, T., 1993 7 1, : : Default journal. (1993.7), p. 415-422

研究成果: Article

2 引用 (Scopus)

Magnetic abrasive finishing of WC-Co curved surfaces

Anzai, M., Kawashima, E., Otaki, H. & Nakagawa, T., 1993 6 1, NIST Special Publication. 847 版 Publ by Natl Inst of Standards & Technology, p. 415-422 8 p.

研究成果: Chapter

2 引用 (Scopus)

Magnetic Assisted Polishing of WC-Co Alloy

ANZAI, M., OTAKI, H., SUDO, T. & NAKAGAWA, T., 1993 7 1, : : Default journal. (1993.7), p. 1248-1251

研究成果: Article

Manufacturing of Ferrite-Base Abrasives for Magnetic-Electrolytic Polishing and It's Finishing Characteristics

Anzai, M., Kawashima, E., Nakagawa, T., Otaki, H., Ayabe, Y. & Takahashi, S., 1993, : : Journal of the Japan Society of Powder and Powder Metallurgy. 40, 8, p. 833-836 4 p.

研究成果: Article

公開
1 引用 (Scopus)
1995

Development of Magnetic Polishing Tool using Sm-Co Magnet

ANZAI, M., JEONG, H., KAWASHIMA, E. & NAKAGAWA, T., 1995 3 1, : : International Journal of the Japan Society for Precision Engineering. Vol. 29, p. 241-242

研究成果: Article

High Speed Milling of Cast Iron

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T., KAWASHIMA, E. & MATSUOKA, T., 1995 9 1, : : Default journal. (1995.9), p. 353-363

研究成果: Article

Magnetic Abrasive Finishing of Mold Surface

ANZAI, M., NAKAGAWA, T., KAWASHIMA, E. & LEE, Y. C., 1995 9 1, : : Default journal. (1995.9), p. 365-373

研究成果: Article

1996

A Study on Improving the Efficiency of Magnetic Abrasive Polishing for Die and Mold Surfaces

Lee, L., Nakagawa Takeo, N. T. & Anzai, M., 1996 6 1, : : 韓国精密工学会誌. Vol.13, p. 59-65

研究成果: Article

High-pressure flushing of coolant for cutting operations, Focused on Experimental Equipments and Characterization

Tsuru, H., Anzai, M., Matsuoka, T., Nakagawa, T. & Sata, T., 1996 4 1, : : RIKEN Review No.12. p. 19-20

研究成果: Article

Ultra high speed milling and cutting tools

Anzai, M., Takahashi, I. & Matsuoka, T., 1996 12 1, : : International Journal of the Japan Society for Precision Engineering. 30, 4, p. 299-303 5 p.

研究成果: Article

3 引用 (Scopus)

Ultra High Speed Milling and Tools

ANZAI, M., TAKAHASHI, I. & MATSUOKA, T., 1996 4 1, : : International Journal of the Japan Society for Precision Engineering. Vol.30, p. 299-303

研究成果: Article

Ultra high speed milling of cast iron, Focused on Experimental Equipments and Characterization

Takahashi, I., Yoshida, T., Anzai, M., Matsuoka, T. & Nakagawa, T., 1996 4 1, : : RIKEN Review No.12. p. 17-18

研究成果: Article

Ultra High Speed Milling of Quenched Die Steel

Matsuoka, T., Takahashi, I., ANZAI, M., NAKAGAWA, T. & Takeoka, E., 1996 9 1, : : Default journal. (1996.9), p. 655-670

研究成果: Article

1997

Automatic Finishing of EDMed Die and Mold Surface Using Magnetic Abrasive Finishing Process

ANZAI, M., Yoshida, T. & NAKAGAWA, T., 1997 6 1, : : Default journal. (1997.6), p. 86-92

研究成果: Article

Manufacturing Error in Curved Surface Milling of Die and Mold by Ball End Mill

Kase, K., TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 6 1, : : Default journal. (1997.6), p. 264-269

研究成果: Article

Ultra High Speed Cutting Characteristics of Steel and Cast Iron using cBN Tool

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 6 1, : : Default journal. (1997.6), p. 248-257

研究成果: Article

1999

Development of ABS Rapid Prototyping Machine (SMART-M) using Combination of Extruding and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 1999 10 1, : : Default journal. (1999.10), p. 647-650

研究成果: Article

3 引用 (Scopus)

Lamination of metal sheets

Himmer, T., Nakagawa, T. & Anzai, M., 1999 6, : : Computers in Industry. 39, 1, p. 27-33 7 p.

研究成果: Article

33 引用 (Scopus)
15 引用 (Scopus)
2000

Application of Ultra High Speed Milling to Rapid Fabrication of 3D products

Takahashi, I., Anzai, M. & Arai, M., 2000 6 1, : : Default journal. (2000.6), p. 469-474

研究成果: Article

Automatic finishing of Stereolithography product surface using magnetic assisted polishing

Anzai, M., Yamazawa, K., Takahashi, I. & Kase, K., 2000 6 1, : : Default journal. (2000.6), p. 464-468

研究成果: Article

Development of ABS Rapid Prototyping Machine (SMART-MⅡ) using Combination of Sheet Extrusion and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 2000 6 1, : : Default journal. (2000.6), p. 237-241

研究成果: Article

2001

Development of CAM System for High Speed Milling

Sakamoto, T., Takeuchi, Y., Takahasi, I., Kase, K. & Anzai, M., 2001, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 67, 2, p. 284-288 5 p.

研究成果: Article

2 引用 (Scopus)

Fabrication of Ball End Mill for High Speed Milling and Its Characterization

Lu, Y., Takeuchi, Y., Takahashi, I., Kase, K. & Anzai, M., 2001 5 1, : : Default journal. p. 205-208

研究成果: Article

2002

Development of Inline Micro Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M., 2002 1 1, : : Default journal.

研究成果: Article

Fabrication of ball end mills for high speed milling and their cutting characteristics

Yi, L. U., Takeuchi, Y., Mitsumori, M., Takahashi, I., Kase, K. & Anzai, M., 2002 3 1, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 68, 3, 1 p.

研究成果: Review article

1 引用 (Scopus)
2003
公開
3 引用 (Scopus)

Fundamental Properties of 3D Microfabrication Using a Femto-second Laser

Yamanoi, M., Wada, S., Anzai, M., Hitoshi Ohmori, O. & Makinouchi, A., 2003 12 1, : : Proceedings of SPIE - The International Society for Optical Engineering. 5063, p. 378-380 3 p.

研究成果: Conference article

2004

3-D CAD/CAM system Development of Ball End Mill Creation for High Speed Milling

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2004 6 1, : : Default journal. June 17-19, p. 51-57

研究成果: Article

2005

An integrated system development for ball end mill design, creation and evaluation

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2005 4 1, : : International Journal of Advanced Manufacturing Technology. 25, 7-8, p. 628-646 19 p.

研究成果: Article

24 引用 (Scopus)

Micro forming simulation techniques and its application

T., K., T., S., Y., U., W., L., H., O., M., A., Y., W., S., M., Y, L. & Anzai, M., 2005 2 1, : : Default journal.

研究成果: Article

2006