Masahiro Anzai

1999

Lamination of metal sheets

Himmer, T., Nakagawa, T. & Anzai, M., 1999 6月, In: Computers in Industry. 39, 1, p. 27-33 7 p.

研究成果: Article › 査読

Tool Wear Characteristics of Small Diameter Ball End Mill on Ultra High Speed Milling at l00000min"' Rotation Speed

Takahashi, I., Anzai, M. & Nakagawa, T., 1999, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 65, 6, p. 867-871 5 p.

研究成果: Article › 査読

15 被引用数 (Scopus)

1997

Automatic Finishing of EDMed Die and Mold Surface Using Magnetic Abrasive Finishing Process

ANZAI, M., Yoshida, T. & NAKAGAWA, T., 1997 6月 1, In: Default journal. (1997.6), p. 86-92

研究成果: Article › 査読

Manufacturing Error in Curved Surface Milling of Die and Mold by Ball End Mill

Kase, K., TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 6月 1, In: Default journal. (1997.6), p. 264-269

研究成果: Article › 査読

Ultra High Speed Cutting Characteristics of Steel and Cast Iron using cBN Tool

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 6月 1, In: Default journal. (1997.6), p. 248-257

研究成果: Article › 査読

1996

A Study on Improving the Efficiency of Magnetic Abrasive Polishing for Die and Mold Surfaces

Lee, L., Nakagawa Takeo, N. T. & Anzai, M., 1996 6月 1, In: 韓国精密工学会誌. Vol.13, p. 59-65

研究成果: Article › 査読

High-pressure flushing of coolant for cutting operations, Focused on Experimental Equipments and Characterization

Tsuru, H., Anzai, M., Matsuoka, T., Nakagawa, T. & Sata, T., 1996 4月 1, In: RIKEN Review No.12. p. 19-20

研究成果: Article › 査読

Magnetic abrasive automatic Polishing of curved surface, Focused on Experimental Equipments and Characterization

Anzai, M., Yoshida, T. & Nakagawa, T., 1996 4月 1, In: RIKEN Review No.12. p. 15-16

研究成果: Article › 査読

Ultra high speed milling and cutting tools

Anzai, M., Takahashi, I. & Matsuoka, T., 1996 12月 1, In: International Journal of the Japan Society for Precision Engineering. 30, 4, p. 299-303 5 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Ultra High Speed Milling and Tools

ANZAI, M., TAKAHASHI, I. & MATSUOKA, T., 1996 4月 1, In: International Journal of the Japan Society for Precision Engineering. Vol.30, p. 299-303

研究成果: Article › 査読

Ultra high speed milling of cast iron, Focused on Experimental Equipments and Characterization

Takahashi, I., Yoshida, T., Anzai, M., Matsuoka, T. & Nakagawa, T., 1996 4月 1, In: RIKEN Review No.12. p. 17-18

研究成果: Article › 査読

Ultra High Speed Milling of Quenched Die Steel

Matsuoka, T., Takahashi, I., ANZAI, M., NAKAGAWA, T. & Takeoka, E., 1996 9月 1, In: Default journal. (1996.9), p. 655-670

研究成果: Article › 査読

1995

Development of Magnetic Polishing Tool using Sm-Co Magnet

ANZAI, M., JEONG, H., KAWASHIMA, E. & NAKAGAWA, T., 1995 3月 1, In: International Journal of the Japan Society for Precision Engineering. Vol. 29, p. 241-242

研究成果: Article › 査読

High Speed Milling of Cast Iron

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T., KAWASHIMA, E. & MATSUOKA, T., 1995 9月 1, In: Default journal. (1995.9), p. 353-363

研究成果: Article › 査読

Magnetic Abrasive Finishing of Mold Surface

ANZAI, M., NAKAGAWA, T., KAWASHIMA, E. & LEE, Y. C., 1995 9月 1, In: Default journal. (1995.9), p. 365-373

研究成果: Article › 査読

Rapid prototyping for direct manufacturing of metallic parts

Nakagawa, T. & Anzai, M., 1995, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 64, 7, p. 505-510 6 p.

研究成果: Article › 査読

1993

Application for Deburring of Mechanical Parts Using Magnetic Abrasive Finishing

ANZAI, M., OTAKI, H., KAWASHIMA, E. & NAKAGAWA, T., 1993 3月 1, In: International Journal of the Japan Society for Precision Engineering. Vol. 27, p. 223-224

研究成果: Article › 査読

Magnetic Abrasive Finishing of WC-Co Curved Surface

ANZAI, M., KAWASHIMA, E., OTAKI, H. & NAKAGAWA, T., 1993 7月 1, In: Default journal. (1993.7), p. 415-422

研究成果: Article › 査読

3 被引用数 (Scopus)

Magnetic abrasive finishing of WC-Co curved surfaces

Anzai, M., Kawashima, E., Otaki, H. & Nakagawa, T., 1993 6月 1, NIST Special Publication. 847 ed. Publ by Natl Inst of Standards & Technology, p. 415-422 8 p.

研究成果: Chapter

3 被引用数 (Scopus)

Magnetic Assisted Polishing of WC-Co Alloy

ANZAI, M., OTAKI, H., SUDO, T. & NAKAGAWA, T., 1993 7月 1, In: Default journal. (1993.7), p. 1248-1251

研究成果: Article › 査読

Manufacturing of Ferrite-Base Abrasives for Magnetic-Electrolytic Polishing and It's Finishing Characteristics

Anzai, M., Kawashima, E., Nakagawa, T., Otaki, H., Ayabe, Y. & Takahashi, S., 1993, In: Journal of the Japan Society of Powder and Powder Metallurgy. 40, 8, p. 833-836 4 p.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Manufacturing of Iron Bonded Diamond Magnetic Abrasives by Sintering and its Finishing Characteristics, Magnetic Abrasive Finishing

ANZAI, M., OTAKI, H., SUDO, T. & NAKAGAWA, T., 1993 4月 1, In: International Journal of the Japan Society for Precision Engineering. Vol. 27, p. 357-358

研究成果: Article › 査読

1992

Automatic Polishing of Mold Surface by Magnetic Abrasive Finishing

ANZAI, M., SUDO, T. & NAKAGAWA, T., 1992 9月 1, In: Default journal. (1992.9), p. 144-153

研究成果: Article › 査読

Magnetic Finishing of WC-Co Alloy Using Diamond Paste

Anzai, M., Sudo, T., Otaki, H., Obana, T. & Nakagawa, T., 1992 12月, In: Journal of the Japan Society of Powder and Powder Metallurgy. 39, 6, p. 510-514 5 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Production of Zinc Back-up. Stainless Steel Replicated Mold by Arc Spray and Metallizing Process,

ANZAI, M., ENDO, H. & NAKAGAWA, T., 1992 9月 1, In: Default journal. (1992.9), p. 212-220

研究成果: Article › 査読

1991

Fabrication of Magnetic Abrasives Using Plasma Powder Melting Method (The Effect of Fe Matrix)

Anzai, M., Masaki, K. & Nakagawa, T., 1991, In: Journal of the Japan Society of Powder and Powder Metallurgy. 38, 4, p. 472-476 5 p.

研究成果: Article › 査読

Open Access

3 被引用数 (Scopus)

Preparation of Magnetic Abrasives by Mechanical Alloying and Its Finishing Properties

Anzai, M., Sudo, T., Endo, H., Otaki, H. & Nakagawa, T., 1991, In: Journal of the Japan Society of Powder and Powder Metallurgy. 38, 1, p. 55-58 4 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

1990

Automatic Polishing of 3-D Mold Surface by Magnetic Abrasive

ANZAI, M., MASAKI, K. & NAKAGAWA, T., 1990 5月 1, In: Default journal. (1990.5), p. 184-191

研究成果: Article › 査読

Fabrication of Co alloy-carbide composites and 3-dimensional model using plasma powder melting method

Anzai, M. & Nakagawa, T., 1990, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 76, 3, p. 399-405 7 p.

研究成果: Article › 査読

Open Access

3 被引用数 (Scopus)

Fabrication of Fe-carbide composite using Plasma-Powder-Melting method and it's properties

Anzai, M. & Nakagawa, T., 1990, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 76, 1, p. 57-64 8 p.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Magnetic Abrasive Finishing using PPM Magnetic Abrasives

Masaki, K., Anzai, M. & Nakagawa, T., 1990, In: Journal of the Japan Society for Precision Engineering. 56, 5, p. 935-940 6 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Preparation and characteristics of Metal-Car- bide Composite Materials Using Plasma Powder Melting Method

Anzai, M. & Nakagawa, T., 1990, In: Journal of the Japan Society of Powder and Powder Metallurgy. 37, 3, p. 426-432 7 p.

研究成果: Article › 査読

Open Access

1985

Research and Development of C/C Composites using Bulk Mesophase

OKURA, A. & Anzai, M., 1985 12月 1, In: Transaction ISIJ. 25, p. B375

研究成果: Article › 査読

安齋 正博

研究成果

検索結果

安齋正博