• 258 引用
  • 7 h指数
1985 …2020

年単位の研究成果

Pureに変更を加えた場合、すぐここに表示されます。

研究成果

3-D CAD/CAM system Development of Ball End Mill Creation for High Speed Milling

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2004 6 1, : : Default journal. June 17-19, p. 51-57

研究成果: Article

An integrated system development for ball end mill design, creation and evaluation

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2005 4 1, : : International Journal of Advanced Manufacturing Technology. 25, 7-8, p. 628-646 19 p.

研究成果: Article

24 引用 (Scopus)

Application of Ultra High Speed Milling to Rapid Fabrication of 3D products

Takahashi, I., Anzai, M. & Arai, M., 2000 6 1, : : Default journal. (2000.6), p. 469-474

研究成果: Article

A Study on Improving the Efficiency of Magnetic Abrasive Polishing for Die and Mold Surfaces

Lee, L., Nakagawa Takeo, N. T. & Anzai, M., 1996 6 1, : : 韓国精密工学会誌. Vol.13, p. 59-65

研究成果: Article

Automatic Finishing of EDMed Die and Mold Surface Using Magnetic Abrasive Finishing Process

ANZAI, M., Yoshida, T. & NAKAGAWA, T., 1997 6 1, : : Default journal. (1997.6), p. 86-92

研究成果: Article

Automatic finishing of Stereolithography product surface using magnetic assisted polishing

Anzai, M., Yamazawa, K., Takahashi, I. & Kase, K., 2000 6 1, : : Default journal. (2000.6), p. 464-468

研究成果: Article

Automatic Polishing of 3-D Mold Surface by Magnetic Abrasive

ANZAI, M., MASAKI, K. & NAKAGAWA, T., 1990 5 1, : : Default journal. (1990.5), p. 184-191

研究成果: Article

Automatic Polishing of Mold Surface by Magnetic Abrasive Finishing

ANZAI, M., SUDO, T. & NAKAGAWA, T., 1992 9 1, : : Default journal. (1992.9), p. 144-153

研究成果: Article

Biodegradable and hollowed micro-scaffolds for improved modular assembly-based tissue engineering: Design, 3D fabrication, and feasibility in randomly packed perfusion culture

Pang, Y., Sutoko, S., Horimoto, Y., Weng, D., Montagne, K., Komori, K., Takano, K., Shirakashi, R., Anzai, M., Niino, T. & Sakai, Y., 2019 9 15, : : Biochemical Engineering Journal. 149, 107239.

研究成果: Article

3 引用 (Scopus)

Development of ABS Rapid Prototyping Machine (SMART-M) using Combination of Extruding and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 1999 10 1, : : Default journal. (1999.10), p. 647-650

研究成果: Article

Development of ABS Rapid Prototyping Machine (SMART-MⅡ) using Combination of Sheet Extrusion and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 2000 6 1, : : Default journal. (2000.6), p. 237-241

研究成果: Article

Development of CAM System for High Speed Milling

Sakamoto, T., Takeuchi, Y., Takahasi, I., Kase, K. & Anzai, M., 2001, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 67, 2, p. 284-288 5 p.

研究成果: Article

2 引用 (Scopus)

Development of Die Mold Processing Machine with Multi- Spindles and Axes

Kitamura, A., Takahashi, I., Anzai, M. & Takeuchi, Y., 2007 2 1, : : International Journal of Automation Technology. Vol.1, p. 94-102

研究成果: Article

Development of Inline Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M., 2010 1 1, : : International Journal of Automation Technology. 4, p. 9-14

研究成果: Article

Development of Inline Micro Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M., 2002 1 1, : : Default journal.

研究成果: Article

Development of Magnetic Polishing Tool using Sm-Co Magnet

ANZAI, M., JEONG, H., KAWASHIMA, E. & NAKAGAWA, T., 1995 3 1, : : International Journal of the Japan Society for Precision Engineering. Vol. 29, p. 241-242

研究成果: Article

公開
公開
3 引用 (Scopus)

Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Nakai, H., Sawa, T. & Anzai, M., 2019 1 1, Recent Development in Machining, Materials and Mechanical Technologies III. Nguyen, H. B. (版). Trans Tech Publications Ltd, p. 31-38 8 p. (Key Engineering Materials; 巻数 825 KEM).

研究成果: Conference contribution

Fabrication of Ball End Mill for High Speed Milling and Its Characterization

Lu, Y., Takeuchi, Y., Takahashi, I., Kase, K. & Anzai, M., 2001 5 1, : : Default journal. p. 205-208

研究成果: Article

Fabrication of ball end mills for high speed milling and their cutting characteristics

Yi, L. U., Takeuchi, Y., Mitsumori, M., Takahashi, I., Kase, K. & Anzai, M., 2002 3 1, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 68, 3, 1 p.

研究成果: Review article

1 引用 (Scopus)
公開
3 引用 (Scopus)
公開
3 引用 (Scopus)
公開
2 引用 (Scopus)
公開
3 引用 (Scopus)

Fine piercing of electromagnetic steel sheets by micro-punches under nearly zero clearance

Katsuta, E., Aizawa, T., Morita, H., Dohda, K. & Anzai, M., 2018 1 1, : : Procedia Manufacturing. 15, p. 1459-1466 8 p.

研究成果: Conference article

公開
1 引用 (Scopus)

Frictional properties of diamond-like carbon coated tool in dry intermittent machining of aluminum alloy 5052

Yokota, T., Sawa, T., Yokouchi, M., Tozawa, K., Anzai, M. & Aizawa, T., 2014 4 1, : : Precision Engineering. 38, 2, p. 365-370 6 p.

研究成果: Article

15 引用 (Scopus)

Fundamental Properties of 3D Microfabrication Using a Femto-second Laser

Yamanoi, M., Wada, S., Anzai, M., Hitoshi Ohmori, O. & Makinouchi, A., 2003 12 1, : : Proceedings of SPIE - The International Society for Optical Engineering. 5063, p. 378-380 3 p.

研究成果: Conference article

High-pressure flushing of coolant for cutting operations, Focused on Experimental Equipments and Characterization

Tsuru, H., Anzai, M., Matsuoka, T., Nakagawa, T. & Sata, T., 1996 4 1, : : RIKEN Review No.12. p. 19-20

研究成果: Article

High speed machining: A review from a viewpoint of chip formation

Obikawa, T., Anzai, M., Egawa, T., Narutaki, N., Shintani, K. & Takeoka, E., 2011, High Speed Machining. p. 578-583 6 p. (Advanced Materials Research; 巻数 188).

研究成果: Conference contribution

9 引用 (Scopus)

High speed machining: a review from a viewpoint of chip formation

Obikawa, T., Egawa, T., Narutaki, N., Shintani, K., Takeoka, E. & Anzai, M., 2010 10 9, : : Proceedings of the Fourth International Conference on High Speed Machining.

研究成果: Article

High Speed Milling of Cast Iron

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T., KAWASHIMA, E. & MATSUOKA, T., 1995 9 1, : : Default journal. (1995.9), p. 353-363

研究成果: Article

Hot mold stamping of optical plastics and glasses with transcription of super-hydrophobic surfaces

Hasegawa, T., Aizawa, T., Inohara, T., Wasa, K. & Anzai, M., 2018 1 1, : : Procedia Manufacturing. 15, p. 1437-1444 8 p.

研究成果: Conference article

公開
4 引用 (Scopus)

Lamination of metal sheets

Himmer, T., Nakagawa, T. & Anzai, M., 1999 6, : : Computers in Industry. 39, 1, p. 27-33 7 p.

研究成果: Article

34 引用 (Scopus)

Magnetic Abrasive Finishing of Mold Surface

ANZAI, M., NAKAGAWA, T., KAWASHIMA, E. & LEE, Y. C., 1995 9 1, : : Default journal. (1995.9), p. 365-373

研究成果: Article

Magnetic Abrasive Finishing of WC-Co Curved Surface

ANZAI, M., KAWASHIMA, E., OTAKI, H. & NAKAGAWA, T., 1993 7 1, : : Default journal. (1993.7), p. 415-422

研究成果: Article

2 引用 (Scopus)

Magnetic abrasive finishing of WC-Co curved surfaces

Anzai, M., Kawashima, E., Otaki, H. & Nakagawa, T., 1993 6 1, NIST Special Publication. 847 版 Publ by Natl Inst of Standards & Technology, p. 415-422 8 p.

研究成果: Chapter

2 引用 (Scopus)
1 引用 (Scopus)