Pureに変更を加えた場合、すぐここに表示されます。

研究成果 1985 2019

  • 235 引用
  • 7 h指数
  • 71 Article
  • 3 Conference article
  • 2 Conference contribution
  • 1 Chapter
フィルター
Article
2019
1 引用 (Scopus)

Biodegradable and hollowed micro-scaffolds for improved modular assembly-based tissue engineering: Design, 3D fabrication, and feasibility in randomly packed perfusion culture

Pang, Y., Sutoko, S., Horimoto, Y., Weng, D., Montagne, K., Komori, K., Takano, K., Shirakashi, R., Anzai, M., Niino, T. & Sakai, Y., 2019 9 15, : : Biochemical Engineering Journal. 149, 107239.

研究成果: Article

Scaffolds (biology)
Tissue engineering
Scaffolds
Fabrication
Tissue
公開
Milling (machining)
Machining
Wear of materials
Milling machines
Surface roughness
2017
Molybdenum
Chromium
Drilling
Steel
Wear of materials
2016
7 引用 (Scopus)

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y., 2016 8 30, : : Biofabrication. 8, 3, 035016.

研究成果: Article

Scaffolds (biology)
Liver
Tissue
Fabrication
Scaffolds
2014
12 引用 (Scopus)

Frictional properties of diamond-like carbon coated tool in dry intermittent machining of aluminum alloy 5052

Yokota, T., Sawa, T., Yokouchi, M., Tozawa, K., Anzai, M. & Aizawa, T., 2014 4, : : Precision Engineering. 38, 2, p. 365-370 6 p.

研究成果: Article

Aluminum alloys
Diamonds
Machining
Amorphous carbon
Carbon
Transcription
Machining
Mirrors
Resins
Acrylics
2011
2 引用 (Scopus)
Milling (machining)
Ball milling
Machine tools

Development of Inline Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M., 2010 1 1, : : International Journal of Automation Technology. 4, p. 9-14

研究成果: Article

High speed machining: a review from a viewpoint of chip formation

Obikawa, T., Egawa, T., Narutaki, N., Shintani, K., Takeoka, E. & Anzai, M., 2010 10 9, : : Proceedings of the Fourth International Conference on High Speed Machining.

研究成果: Article

2009
1 引用 (Scopus)
Layered manufacturing
Binders
Bone
Powders
Chemical analysis
1 引用 (Scopus)
Layered manufacturing
Bone
Powders
Binders
Compressive strength
2008
1 引用 (Scopus)
Machine tool drives
Linear motors

Trial Forming of Artificial Bone by Inkjet-type Powder-layered Manufacturing

Yamazawa, K., Anzai, M., Himeno, R., Suzuki, H., Narahara, H. & Suzuki, S., 2008 3 1, : : International Journal of Automation Technology. Vol.2, p. 156-161

研究成果: Article

2007

Development of Die Mold Processing Machine with Multi- Spindles and Axes

Kitamura, A., Takahashi, I., Anzai, M. & Takeuchi, Y., 2007 2 1, : : International Journal of Automation Technology. Vol.1, p. 94-102

研究成果: Article

2006
1 引用 (Scopus)
Machine tools
Metals
Processing
Molds
Cost reduction
1 引用 (Scopus)
Machine tools
Specifications
Linear motors
Rails
2005
24 引用 (Scopus)

An integrated system development for ball end mill design, creation and evaluation

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2005 4, : : International Journal of Advanced Manufacturing Technology. 25, 7-8, p. 628-646 19 p.

研究成果: Article

Shape optimization
Milling (machining)
Computer aided manufacturing
Computer aided design
Machining

Micro forming simulation techniques and its application

T., K., T., S., Y., U., W., L., H., O., M., A., Y., W., S., M., Y, L. & Anzai, M., 2005 2 1, : : Default journal.

研究成果: Article

2004

3-D CAD/CAM system Development of Ball End Mill Creation for High Speed Milling

Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2004 6 1, : : Default journal. June 17-19, p. 51-57

研究成果: Article

2003
3 引用 (Scopus)
Milling (machining)
Fabrication
Grinding wheels
Computer aided manufacturing
Computer aided design
2002

Development of Inline Micro Deburring Method Applying Magnetic Polishing

Nakagawa, T., Yoshioka, N., Banno, S. & Anzai, M., 2002 1 1, : : Default journal.

研究成果: Article

1 引用 (Scopus)

Fabrication of ball end mills for high speed milling and their cutting characteristics

Yi, L. U., Takeuchi, Y., Mitsumori, M., Takahashi, I., Kase, K. & Anzai, M., 2002 3, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 68, 3, p. 451 1 p.

研究成果: Article

Milling (machining)
Fabrication
Machining
Grinding wheels
Computer aided manufacturing
2001
1 引用 (Scopus)

Development of CAM System for High Speed Milling

Sakamoto, T., Takeuchi, Y., Takahasi, I., Kase, K. & Anzai, M., 2001, : : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 67, 2, p. 284-288 5 p.

研究成果: Article

Computer aided manufacturing

Fabrication of Ball End Mill for High Speed Milling and Its Characterization

Lu, Y., Takeuchi, Y., Takahashi, I., Kase, K. & Anzai, M., 2001 5 1, : : Default journal. p. 205-208

研究成果: Article

2000

Application of Ultra High Speed Milling to Rapid Fabrication of 3D products

Takahashi, I., Anzai, M. & Arai, M., 2000 6 1, : : Default journal. (2000.6), p. 469-474

研究成果: Article

Automatic finishing of Stereolithography product surface using magnetic assisted polishing

Anzai, M., Yamazawa, K., Takahashi, I. & Kase, K., 2000 6 1, : : Default journal. (2000.6), p. 464-468

研究成果: Article

Development of ABS Rapid Prototyping Machine (SMART-MⅡ) using Combination of Sheet Extrusion and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 2000 6 1, : : Default journal. (2000.6), p. 237-241

研究成果: Article

1999

Development of ABS Rapid Prototyping Machine (SMART-M) using Combination of Extruding and High Speed Milling Process

Yamazawa, K., Anzai, M., Nakagawa, T., Nakajima, K. & Kawaguchi, N., 1999 10 1, : : Default journal. (1999.10), p. 647-650

研究成果: Article

3 引用 (Scopus)
Milling machines
Bearings (structural)
Machine tools
Air
Experiments
33 引用 (Scopus)

Lamination of metal sheets

Himmer, T., Nakagawa, T. & Anzai, M., 1999 6, : : Computers in Industry. 39, 1, p. 27-33 7 p.

研究成果: Article

Sheet metal
Laser beam cutting
Cooling
Milling (machining)
Injection molding
14 引用 (Scopus)
Wear of materials
Milling machines
Carbides
Experiments
1997

Automatic Finishing of EDMed Die and Mold Surface Using Magnetic Abrasive Finishing Process

ANZAI, M., Yoshida, T. & NAKAGAWA, T., 1997 6 1, : : Default journal. (1997.6), p. 86-92

研究成果: Article

Manufacturing Error in Curved Surface Milling of Die and Mold by Ball End Mill

Kase, K., TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 6 1, : : Default journal. (1997.6), p. 264-269

研究成果: Article

Ultra High Speed Cutting Characteristics of Steel and Cast Iron using cBN Tool

TAKAHASHI, I., ANZAI, M., NAKAGAWA, T. & MATSUOKA, T., 1997 6 1, : : Default journal. (1997.6), p. 248-257

研究成果: Article

1996

A Study on Improving the Efficiency of Magnetic Abrasive Polishing for Die and Mold Surfaces

Lee, L., Nakagawa Takeo, N. T. & Anzai, M., 1996 6 1, : : 韓国精密工学会誌. Vol.13, p. 59-65

研究成果: Article

High-pressure flushing of coolant for cutting operations, Focused on Experimental Equipments and Characterization

Tsuru, H., Anzai, M., Matsuoka, T., Nakagawa, T. & Sata, T., 1996 4 1, : : RIKEN Review No.12. p. 19-20

研究成果: Article

3 引用 (Scopus)

Ultra high speed milling and cutting tools

Anzai, M., Takahashi, I. & Matsuoka, T., 1996, : : International Journal of the Japan Society for Precision Engineering. 30, 4, p. 299-303 5 p.

研究成果: Article

Milling (machining)
Cutting tools
Productivity
Carbide tools
Steel

Ultra High Speed Milling and Tools

ANZAI, M., TAKAHASHI, I. & MATSUOKA, T., 1996 4 1, : : International Journal of the Japan Society for Precision Engineering. Vol.30, p. 299-303

研究成果: Article

Ultra high speed milling of cast iron, Focused on Experimental Equipments and Characterization

Takahashi, I., Yoshida, T., Anzai, M., Matsuoka, T. & Nakagawa, T., 1996 4 1, : : RIKEN Review No.12. p. 17-18

研究成果: Article