• 2436 引用
  • 25 h指数
1989 …2019
Pureに変更を加えた場合、すぐここに表示されます。

研究成果 1989 2019

  • 2436 引用
  • 25 h指数
  • 299 Article
  • 26 Conference contribution
  • 3 Chapter
24 引用 (Scopus)

Control of nanocrystalline orientation using the application of a stress field in an amorphous alloy

Ogura, A., Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001 8 13, : : Applied Physics Letters. 79, 7, p. 1042-1044 3 p.

研究成果: Article

stress distribution
cantilever beams
plane strain
test equipment
machining
24 引用 (Scopus)

Control of nano-crystalline orientation using the application of a stress field in an amorphous alloy

Ogura, A., Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001 1 1, : : Appl. Phys. Lett.. 79, p. 1042-1044

研究成果: Article

1 引用 (Scopus)

Crystallization in an amorphous metal during shear deformation: A molecular dynamics study

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2001, : : International Journal of Materials and Product Technology. SPEC. ISS. VOL.1, p. 71-76 6 p.

研究成果: Article

Crystallization
Shear deformation
Molecular dynamics
Shear stress
Metals

Deformation behavior of a fine-grained 304 stainless steel using micro-sized specimens

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2001, : : International Journal of Materials and Product Technology. SPEC. ISS. VOL.1, p. 298-303 6 p.

研究成果: Article

Stainless Steel
Stainless steel
Austenitic stainless steel
Strain hardening
Grain boundaries

Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Kahn, H., Boer, M., Judy, M. & Spearing, S. (版). 巻 657.

研究成果: Conference contribution

Austenitic stainless steel
Strain hardening
Cantilever beams
Grain boundary sliding
Dislocations (crystals)
19 引用 (Scopus)

Detection of pre-martensitic transformation phenomena in austenitic stainless steels using an acoustic emission technique

Inamura, T., Nagano, S., Shimojo, M., Takashima, K. & Higo, Y., 2001 1 1, : : J. Acoustic Emission. 19, p. 85-90

研究成果: Article

Effects of noble gas environments on fatigue crack growth in titanium alloys

Shimojo, M., Kusama, R., Otsubo, M. & Higo, Y., 2001 1 1, : : Default journal.

研究成果: Article

1 引用 (Scopus)

Extension of high cycle fatigue life by the formation of nano-sized martensite particles at intersections of dislocations in an austenitic stainless steel

Inamura, T., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (版). 巻 634.

研究成果: Conference contribution

Austenitic stainless steel
Martensite
Fatigue of materials
Cryogenics
Temperature

Fatigue behaviour of a micro-sized austenitic stainless steel with fine grains

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2001 1 1, : : Default journal.

研究成果: Article

68 引用 (Scopus)
Amorphous alloys
Fatigue crack propagation
cracks
Thin films
thin films
4 引用 (Scopus)

Fatigue crack growth of a Ni-P amorphous alloy thin film

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001, ASTM Special Technical Publication. 1413 版 American Society for Testing and Materials, p. 52-61 10 p.

研究成果: Conference contribution

Amorphous alloys
Fatigue crack propagation
Thin films
Crack closure
Mechanical testing
4 引用 (Scopus)

Fatigue crack growth of a Ni-P amorphous alloy thin film; Mechanical Properties of Structural Films

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001 1 1, : : American Society for Testing and Materials. ASTM STP 1413, p. 52-61

研究成果: Article

13 引用 (Scopus)
crack propagation
Polymethyl Methacrylate
Fatigue crack propagation
Polymethyl methacrylates
polymethyl methacrylate
13 引用 (Scopus)

Fatigue crack propagation mechanisms in poly (methyl methacrylate) by in-situ observation with a scanning laser microscope

Ishiyama, C., Asai, T., Kobayashi, M., Shimojo, M. & Higo, Y., 2001 1 1, : : J.polym.Sci.,Pt.B. 39, p. 3103-3113

研究成果: Article

5 引用 (Scopus)

Formation of nano-sized crystals during plastic deformation in amorphous alloys

Ogura, A., Sato, M., Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (版). 巻 634.

研究成果: Conference contribution

Amorphous alloys
Plastic deformation
Transmission electron microscopy
Crystal orientation
Crystals
6 引用 (Scopus)
19 引用 (Scopus)

Formation of nanosized martensite particles in stainless steels

Shimojo, M., Inamura, T., Myeong, T. H., Takashima, K. & Higo, Y., 2001 2, : : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 32, 2, p. 261-265 5 p.

研究成果: Article

Stainless Steel
martensite
Martensite
stainless steels
Stainless steel
19 引用 (Scopus)

Formation of nano-sized martensite particles in stainless steels

Shimojo, M., Inamura, T., Myeong, T. H., Takashima, K. & Higo, Y., 2001 1 1, : : Metall. Mater. Trans. A. 32A, p. 261-265

研究成果: Article

8 引用 (Scopus)

Fracture behavior of micro-sized specimens with fatigue pre-crack prepared from a Ni-P amorphous alloy thin film

Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2001, ASTM Special Technical Publication. 1413 版 American Society for Testing and Materials, p. 72-81 10 p.

研究成果: Conference contribution

Amorphous alloys
Crack propagation
Fatigue of materials
Cracks
Thin films
2 引用 (Scopus)

Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2001, Materials Research Society Symposium - Proceedings. Farkas, D., Kung, H., Mayo, M., Swygenhoven, H. & Weertman, J. (版). 巻 634.

研究成果: Conference contribution

Crystallization
Molecular dynamics
Plastic deformation
Metals
Computer simulation
Noble Gases
Inert gases
Titanium
Plastic deformation
Ball milling

Size effect of corrosion properties in micro-sized 304 austenitic stainless steel specimens

Mizutani, Y., Shimojo, M., Takashima, K. & Higo, Y., 2001 1 1, : : Default journal.

研究成果: Article

Temperature dependence of fracture toughness in a micro-sized Ni-P amorphous alloy

Tarumi, R., Shimojo, M., Takashima, K. & Higo, Y., 2001 1 1, : : Default journal.

研究成果: Article

2000

Anisotropic fracture behavior of electroless deposited Ni-P amorphous alloy thin films

Takashima, K., Ogura, A., Ichikawa, Y., Shimojo, M. & Higo, Y., 2000 1 1, : : Default journal. p. 574

研究成果: Article

Crystallization in an amorphous metal during shear deformation --A molecular dynamics study--

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 2000 1 1, : : Default journal. p. 10

研究成果: Article

Deformation behavior of micro-sized austenitic stainless steel specimens

Zhang, G. P., Takashima, K., Shimojo, M. & Higo, Y., 2000 1 1, : : Default journal. p. 52-53

研究成果: Article

7 引用 (Scopus)
Noble Gases
Inert gases
Titanium
Fatigue crack propagation
rare gases
11 引用 (Scopus)

Effects of sorbed water on crack propagation in poly(methyl methacrylate) under static tensile stress

Bokoi, Y., Ishiyama, C., Shimojo, M., Shiraishi, Y. & Higo, Y., 2000 10, : : Journal of Materials Science. 35, 19, p. 5001-5011 11 p.

研究成果: Article

Polymethyl Methacrylate
Polymethyl methacrylates
Tensile stress
Crack propagation
Water
11 引用 (Scopus)

Effects of sorbed water on crack propagation in poly (methyl methacrylate) under static tensile stress

Bokoi, Y., Ishiyama, C., Shimojo, M., Shiraishi, Y. & Higo, Y., 2000 1 1, : : J. Mater. Sci.. 35, p. 5001-5011

研究成果: Article

Fatigue life and crack growth properties of micro-sized Ni-P amorphous alloy specimens

Takashima, K., Maekawa, S., Ichikawa, Y., Shimojo, M., Higo, Y., Sugiura, S. & Swain, M. V., 2000 1 1, : : Default journal. p. 526-529

研究成果: Article

6 引用 (Scopus)

Fatigue properties for micro-sized Ni-P amorphous alloy specimens

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, 巻 605. p. 247-252 6 p.

研究成果: Conference contribution

Amorphous alloys
Fatigue of materials
Fatigue crack propagation
Crack propagation
Stress intensity factors
6 引用 (Scopus)

Fatigue properties of micro-sized Ni-P amorphous alloy specimens

Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000 1 1, : : Default journal. 605, p. 273-278

研究成果: Article

38 引用 (Scopus)

Fatigue testing machine of micro-sized specimens for MEMS applications

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S., Pfister, B. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, 巻 605. p. 241-246 6 p.

研究成果: Conference contribution

Diamond
Fatigue testing
MEMS
Diamonds
Actuators

Fracture and fatigue properties of micro-sized specimens for bio-medical applications

Higo, Y., Takashima, K., Shimojo, M. & Ishiyama, C., 2000 1 1, : : Default journal. p. 106

研究成果: Article

16 引用 (Scopus)

Fracture behavior of micro-sized Ni-P amorphous alloy specimens

Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000, Materials Research Society Symposium - Proceedings. Materials Research Society, 巻 605. p. 273-278 6 p.

研究成果: Conference contribution

Amorphous alloys
Cracks
Fatigue of materials
Fracture toughness
Mechanical testing
24 引用 (Scopus)

Fracture behavior of micro-sized Ni-P amourphous alloy specimens

Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. & Swain, M. V., 2000 1 1, : : Default journal. 605, p. 247-252

研究成果: Article

Fracture behaviour of micro-sized specimens prepared from an electroless deposited Ni-P amorphous alloy thin film

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S. & Swain, M. V., 2000 1 1, : : Default journal. p. 243-246

研究成果: Article

Fracture toughness measurements of micro-sized Ni-P amorphous alloy specimens;

Ogura, A., Ichikawa, Y., Shimojo, M., Takashima, K., Higo, Y. & Swain, M. V., 2000 1 1, : : Default journal. p. 574-577

研究成果: Article

18 引用 (Scopus)
Shear deformation
Molecular dynamics
Shear stress
Crystallization
crystallization

New equipment for evaluating performance of microelements on MEMS

Higo, Y., Takashima, K., Shimojo, M., Sugiura, S. & Swain, M. V., 2000 1 1, : : Default journal. p. 997-1000

研究成果: Article

1999

A new fatigue testing machine for micro-sized specimens

Takashima, K., Kimura, T., Shimojo, M., Higo, Y., Sugiura, S. & Swain, M. V., 1999 1 1, : : Default journal. 3, p. 1871-1876

研究成果: Article

A study of a fatigue striation formation mechanism by in-situ observation under a laser microscope during cyclic loading on PMMA

Kobayashi, M., Asai, T., Bokoi, Y., Ishiyama, C., Shimojo, M. & Higo, Y., 1999 1 1, : : Default journal. p. 144

研究成果: Article

Damage evaluation in a Ni-P/Al-Mg composite by forced resonance and acoustic emission

Tarumi, R., Ogura, A., Shimojo, M., Takashima, K. & Higo, Y., 1999 1 1, : : Default journal. p. 74-78

研究成果: Article

Effects of humidity on environmental stress crack propagation in polymethyl methacrylate (PMMA)

Ishiyama, C., Sakuma, T., Bokoi, Y., Shimojo, M. & Higo, Y., 1999 1 1, : : Default journal. p. 142

研究成果: Article

Effects of inert gas on fatigue crack growth in titanium

Shimojo, M. & Higo, Y., 1999 1 1, : : Default journal. 4, p. 2311-2316

研究成果: Article

Fatigue life extension by nano-sized martensite particles in steels

Inamura, T., Abe, R., Myeong, T. H., Shimojo, M. & Higo, Y., 1999 1 1, : : Default journal. 3, p. 1761-1766

研究成果: Article