3-D strain analysis near contact by stereo image correlation technique

K. Himeno, M. Fujikawa, K. Sakaue, M. Takashi

研究成果: Conference contribution

抜粋

In ordinary stress and strain analyses under complicated loads, it is popular to assume boundary conditions by surface forces on contact both in theoretical and numerical approaches. The results, thus, depend more or less on the assumed boundary conditions. It should be pointed out that the kind of assumptions does not prove the validity of results in actual situation. Therefore, it is very important to know conditions of stress or strain on and around contact surface by experiment. The contact problem has been tackled theoretically, numerically or experimentally for long period. In order to evaluate more realistic stresses in the vicinity of contact, it is inevitable to determine actual boundary conditions after overcoming difficulties in experiments. Since it is not valid to assume 2-D state on and around contact surface, 3-D deformation analysis is required inevitably. Standing on the back ground mentioned above, the authors discuss displacement and strain distributions on and around contact by a stereo image hybrid technique in elastic plate under compression by a cylinder on one of its edges. The results are compared with the results obtained by Hertz theory and FEM, then the necessity of experimental and hybrid approaches is demonstrated for the determination of boundary surface force conditions.

元の言語English
ホスト出版物のタイトルProceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics
ページ235-240
ページ数6
出版物ステータスPublished - 2005 12 1
外部発表Yes
イベント2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics - Portland, OR, United States
継続期間: 2005 6 72005 6 9

出版物シリーズ

名前Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics

Conference

Conference2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics
United States
Portland, OR
期間05/6/705/6/9

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント 3-D strain analysis near contact by stereo image correlation technique' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Himeno, K., Fujikawa, M., Sakaue, K., & Takashi, M. (2005). 3-D strain analysis near contact by stereo image correlation technique. : Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics (pp. 235-240). (Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics).