研究成果の検索

"It's a Small World Idea Book Team: 1999 Asilomar Summary."

Horiuchi, Y., Jenks, L. & Park, S-H. 1800 : : Default journal. 12(2000), p. 55-62

研究成果: Research - 審査Article

"It's a Small World Ideabook Team "Into the Rabbit Hole" Board Game Status Report: A Spiral Connecting 2002 and 2003 ISI Asilomar Conversations."

Devon, C., Gill, P., Jenks, L. & Horiuchi, Y. 1800 : : Default journal. 16(2003), p. 101-10

研究成果: Research - 審査Article

Laser shock loading device for real time evaluation of shock induced reaction.

Ito, K. & Aizawa, T. 1800 : : J. Materials Processing Technology.. 85 (1998), p. 91-96

研究成果: Research - 審査Article

Leaky pseudo surface wave on the water - Si (110) interface.

Xu, Y. & Aizawa, T. 1800 : : Physical Letters.. A 260 (1999), p. 512-515

研究成果: Research - 審査Article

Low temperature sintering of dense alumina wire by green microstructure control.

Du, W., Tatsuzawa, K., Aizawa, T. & Kihara, J. 1800 : : Proc. 2000 Powder Metallurgy World Congress..

研究成果: Research - 審査Article

Magnesium matrix composite with solid-state synthesized Mg2Si dispersoids.

Kondoh, K., Oginuma, H., Tsuzuki, R. & Aizawa, T. 1800 : : Materials Transactions.. 44 [4] (2003), p. 611-618

研究成果: Research - 審査Article

Magnetic powder forming simulation subjected to pressing in magnetic Field.

Tamura, S., Aizawa, T. & Kihara, J. 1800 : : Default journal. 45 (1994), p. 353-358

研究成果: Research - 審査Article

Mechanical alloying behavior in molybdenum-silicon system.

Yen, B. K., Aizawa, T. & Kihara, J. 1800 : : Materials Science Forum.. 235 (1997), p. 157-162

研究成果: Research - 審査Article

Mechanically Induced Reaction for Solid-State Synthesis of Mg2Si and Mg2Sn

Aizawa, T. & Song, R. 1800 : : J. Intermetallics. p. 382-391

研究成果: Research - 審査Article

Mechanical properties of bulk sintered titanium nitride ceramics.

Kuwahara, H., Mazaki, N., Takahashi, M., Watanabe, T., Yang, X. & Aizawa, T. 1800 : : Materials Science and Engineering.. A 319-321 (2001), p. 687-691

研究成果: Research - 審査Article

Mesoscopic Modeling for Superplasticity.

mechanics, I. T., equation, T. S., method, T. E., modeling., A. M. & Aizawa, T. 1800 : : Materials Science Forum.. 233-234 (1997), p. 37-46

研究成果: Research - 審査Article

Microstructure evolution and superplasticity of rolled Mg-9Al-1Zn.

Mohri, T., Mabuchi, M., Nakamura, M., Asahina, T., Iwasaki, S., Aizawa, T. & Higashi, K. 1800 : : Materials Science and Engineering.. A290 (2000), p. 139-144

研究成果: Research - 審査Article

Microstructure model for hot deformation and creep behavior on the basis of homogenization theory.

Aizawa, T., Tsumori, F. & Prawato, Y. 1800 : : Advanced Technology of Plasticity.. 2 (2002), p. 1213-1218

研究成果: Research - 審査Article

Micro-XPS analysis of slide-tested TiN films with/without Cl+ implantation.

Yoshitake, M., Akhadejdamrong, T., Aizawa, T. & Yoshihara, K. 1800 : : Surface and Interface Analysis.. 34 (2002), p. 698-702

研究成果: Research - 審査Article

Modeling creep damage based on the real microstructure.

Prawato, Y. & Aizawa, T. 1800 : : J. Practical Failure Analysis.. 2 [6] (2002), p. 68-79

研究成果: Research - 審査Article

Morphology-free processing of magnesium alloys.

Kondoh, K., Luangvaranunt, T. & Aizawa, T. 1800 : : Materials Transactions..

研究成果: Research - 審査Article

MR2719766

Kameko, M. 1800 : : Mathematical Reviews.

研究成果: Research - 審査Article

Nano-crystallization by high speed mechanical alloying.

Aizawa, T. & Kihara, J. 1800 : : Powder Metallurgy World Congress-94.. (1994), p. 1357-1360

研究成果: Research - 審査Article

Nano-granulation in Co-Cu system by bulk mechanical alloying.

Aizawa, T., Cheng, Z., Tokumitsu, K. & Kihara, J. 1800 : : Materials Science and Engineering.. A239-240 (1997), p. 233-241

研究成果: Research - 審査Article

Nano-structured materials via bulk mechanical alloying..

Aizawa, T. & Kondoh, K. 1800 : : Scripta Materiala. 44 (2001), p. 1751-1755

研究成果: Research - 審査Article

NATIONAL GARDEN PARK DEVELOPMENT PROJECT

Isamu Koike, I. K. & Taniguchi, T. 1800 : : Default journal.

研究成果: Research - 審査Article

Non-equilibration of nanostructured Mg2Ni by bulk mechanical alloying.

Aizawa, T., Kuji, T. & Nakano, H. 1800 : : Materials Transactions.. 42 (2001), p. 1284-1292

研究成果: Research - 審査Article

Nontraditional mechanical alloying by the controlled plastic deformation, flow and fracture processes.

Aizawa, T., Kihara, J. & Benson, D. J. 1800 : : Materials Transactions, JIM.. 36 (1995), p. 138-149

研究成果: Research - 審査Article

Normal and anormal microstructure of plasma nitrided Fe-Cr alloys.

Granito, N., Kuwahara, H. & Aizawa, T. 1800 : : J. Materials Science.. 37 (2002), p. 835-844

研究成果: Research - 審査Article

Parallel Constraint Logic Programming Language GDCC and Its Parallel Constraint Solvers

Terasaki, S., Hawley, D. J., Sawada, H., Satoh, K., Menju, S., Kawagishi, T., Iwayama, N. & Aiba, A. 1800 : : ICOT Technical Report.

研究成果: Research - 審査Article

Phase Separation into Nano-crystalline Nitrides in Ternary Ti-Si-N System via N Implantation.

Muraishi, S. & Aizawa, T. 1800 : : Materials Science Forum,. 475-479 (2004), p. 3651-3654

研究成果: Research - 審査Article

Plasma nitriding as an environmentally benign surface structuring process.

Aizawa, T. & Kuwahara, H. 1800 : : Materials Transactions.. 44 [7] (2003), p. 1303-1310

研究成果: Research - 審査Article

Plasma nitriding design for aluminum and aluminum alloys

Visuttipitukul, P. & Aizawa, T. 1800 : : Surface Engineering. 22, p. 187-195

研究成果: Research - 審査Article

Plasma nitriding of cold-pressed and BMA-forged Al compacts.

P.Visuttipitukul, P. V., Aizawa, T., Kondoh, K. & Kuwahara, H. 1800 : : Jpn. J. Powder and Powder Metallurgy.. 49 [11] (2002), p. 1028-1035

研究成果: Research - 審査Article

Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank's solution.

Kuwahara, H., Y.Al-Abdullat, Y. A-A., Mazaki, N., Tsutsumi, S. & Aizawa, T. 1800 : : Materials Transactions.. 42 [7] (2001), p. 1317-1321

研究成果: Research - 審査Article

Progressive steps in the platform science and technology for advanced magnesium alloys..

Kojima, Y., Aizawa, T., Kamado, S. & Higashi, K. 1800 : : Materials Science Forum. 419-422 (2003), p. 3-20

研究成果: Research - 審査Article

Protein Structure Prediction Based on Multi-Level Description

Onizuka, K., Tsuda, H., Ishikawa, M. & Aiba, A. 1800 : : ICOT Technical Report.

研究成果: Research - 審査Article

Pseudo surface wave on the (1012) plane of sapphire.

Xu, Y. & Aizawa, T. 1800 : : J. Applied Physics.. 86 [11] (1999), p. 6507-6511

研究成果: Research - 審査Article

Quantitative nondestructive characterization of visco-elastic materials at high pressure.

Aizawa, T., Ohno, J. & Kihara, J. 1800 : : Composites for the Pressure Vessel Industry.. ASME PVP-302 (1995), p. 121-140

研究成果: Research - 審査Article

Quantitative nondestructive evaluation on the ceramic coating by the acoustic spectro microscopy.

Aizawa, T., Ito, M. & Kihara, J. 1800 : : Japanese J. Tribology.. 40-3 (1995), p. 171-179

研究成果: Research - 審査Article

Reaction-induced phase separation from supersaturated solid solution to nitride in thin films.

Muraishi, S., Aizawa, T. & Kuwahara, H. 1800 : : Surface Coating Technology.. 188-189 (2004), p. 431-434

研究成果: Research - 審査Article

Reaction synthesis of refractory disilicides by mechanical alloying and shock reactive synthesis techniques.

Yen, B. K., Aizawa, T., Kihara, J. & Sakakibara, N. 1800 : : Materials Science and Engineering. A239-240 (1997), p. 515-521

研究成果: Research - 審査Article

Resintering behavior of alumina compact on the route of controlled fracture forming.

W.B.Du, W. B. D., Tatsuzawa, K., Aizawa, T. & Kihara, J. 1800 : : Default journal. 46 [2] (1999), p. 125-130

研究成果: Research - 審査Article

Shock compaction of Al-based nanocrystal materials using on ion-beam device.

Tsuchida, M., Aizawa, T. & K.Horioka, K. H. 1800 : : J. Materials Processing Technology.. 85 (1998), p. 148-152

研究成果: Research - 審査Article

Shock reactive synthesis of (Mo, Ti) sillicides from pretreated powders.

Aizawa, T., Sakakibara, N., Yen, B. K. & Syono, Y. 1800 : : Ceramic Transaction (Innovative Processing and Synthesis of Ceramics). 87 (1997), p. 135-142

研究成果: Research - 審査Article