研究成果の検索

すべてのコンテンツを検索

研究成果 のフィルター

検索コンセプト
選択されたフィルター

出版年

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

著者

  • Kan Akatsu
2014

Torque/current ratio improvement and vibration reduction of switched reluctance motors using multi-stage structure

Matsui, R., Nakao, N. & Akatsu, K., 2014 1 1, 2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014. IEEE Computer Society, p. 1128-1134 7 p. 6869728. (2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014).

研究成果: Conference contribution

4 引用 (Scopus)
2012

Automatic design method considering the frequently used area of a PMSM for an HEV

Yamada, T. & Akatsu, K., 2012 12 1, ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems. 6401969. (ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems).

研究成果: Conference contribution

2 引用 (Scopus)
2016

Harmonic current control for Interior Permanent Magnet Synchronous Machines applying current controller design method by using complex vectors

Okajima, Y. & Akatsu, K., 2016 12 21, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE Computer Society, p. 2815-2820 6 p. 7793428

研究成果: Conference contribution

2011

A basic study of MATRIX motor

Hijikata, H. & Akatsu, K., 2011 11 28, IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future, ECCE 2011, Proceedings. p. 3285-3290 6 p. 6064212. (IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future, ECCE 2011, Proceedings).

研究成果: Conference contribution

6 引用 (Scopus)
2018
8 引用 (Scopus)
2014

Vector control specialized for switched reluctance motor drives

Nakao, N. & Akatsu, K., 2014 1 1, : : IEEJ Transactions on Industry Applications. 134, 12, p. 1006-1015 10 p.

研究成果: Article

4 引用 (Scopus)
2013

High power transformer and motor drive system design for an electriChelicopter

Kawakami, N. & Akatsu, K., 2013 9 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 1065-1070 6 p. 6579240. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

研究成果: Conference contribution

1 引用 (Scopus)
2014

Suppression control method for iron loss of MATRIX motor under flux weakening utilizing individual winding current control

Hijikata, H., Akatsu, K., Miyama, Y., Arita, H. & Daikoku, A., 2014 1 1, 2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014. IEEE Computer Society, p. 2673-2678 6 p. 6869968. (2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014).

研究成果: Conference contribution

2 引用 (Scopus)
2018

A Novel Magnetic Multiple Spur Gear for High Speed Motor System

Aiso, K., Akatsu, K. & Aoyama, Y., 2018 12 3, 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018. Institute of Electrical and Electronics Engineers Inc., p. 3310-3316 7 p. 8557627

研究成果: Conference contribution

2012

Rare earth reduction using a novel variable magnetomotive force, flux intensified IPM machine

Kato, T., Limsuwan, N., Yu, C., Akatsu, K. & Lorenz, R. D., 2012 12 17, 2012 IEEE Energy Conversion Congress and Exposition, ECCE 2012. p. 4346-4353 8 p. 6342231. (2012 IEEE Energy Conversion Congress and Exposition, ECCE 2012).

研究成果: Conference contribution

13 引用 (Scopus)
2017
3 引用 (Scopus)
2014

MATRIX motor with individual winding current control capability for variable parameters and iron loss suppression

Hijikata, H., Akatsu, K., Miyama, Y., Arita, H. & Daikoku, A., 2014 11 17, Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014. Institute of Electrical and Electronics Engineers Inc., p. 551-557 7 p. 6960234. (Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014).

研究成果: Conference contribution

6 引用 (Scopus)
2016

Design of Switched Reluctance Motors for electric hand tools

Mashiko, H. & Akatsu, K., 2016 11 2, Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016. Institute of Electrical and Electronics Engineers Inc., p. 1572-1576 5 p. 7732733

研究成果: Conference contribution

3 引用 (Scopus)
2015

Design Methodology for Variable Leakage Flux IPM for Automobile Traction Drives

Kato, T., Minowa, M., Hijikata, H., Akatsu, K. & Lorenz, R. D., 2015 9 1, : : IEEE Transactions on Industry Applications. 51, 5, p. 3811-3821 11 p., 7115116.

研究成果: Article

18 引用 (Scopus)
2016

Design of axial type slot-less PMSM and systems for electric wheelbarrow

Okada, K. & Akatsu, K., 2016 1 18, 2015 18th International Conference on Electrical Machines and Systems, ICEMS 2015. Institute of Electrical and Electronics Engineers Inc., p. 830-835 6 p. 7385149

研究成果: Conference contribution

1 引用 (Scopus)
2018

Efficiency Improvement for Multi-Position of Receiver in 13.56 MHz Wireless Power Transfer Coupling System

Tri, C. N. & Akatsu, K., 2018 12 26, Proceedings - 2018 IEEE International Power Electronics and Application Conference and Exposition, PEAC 2018. Institute of Electrical and Electronics Engineers Inc., 8590220. (Proceedings - 2018 IEEE International Power Electronics and Application Conference and Exposition, PEAC 2018).

研究成果: Conference contribution

2014

Variable characteristic permanent magnet motor for automobile application

Kato, T., Fukushige, T., Akatsu, K. & Lorenz, R., 2014 1 1, : : SAE Technical Papers. 1

研究成果: Conference article

10 引用 (Scopus)
2019

Design challenges for 13.56MHz 10 kW resonant inverter for wireless power transfer systems

Trung, N. K. & Akatsu, K., 2019 5 1, ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia. Institute of Electrical and Electronics Engineers Inc., 8796928. (ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia).

研究成果: Conference contribution

2011

Torque ripple compensation based on instantaneous torque estimation in permanent magnet synchronous motors

Nakao, N. & Akatsu, K., 2011 9 14, 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011. p. 989-994 6 p. 5994951. (2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011).

研究成果: Conference contribution

8 引用 (Scopus)
2017

Design 13.56MHz 10 kW resonant inverter using GaN HEMT for wireless power transfer systems

Trung, N. K. & Akatsu, K., 2017 11 3, 2017 IEEE Energy Conversion Congress and Exposition, ECCE 2017. Institute of Electrical and Electronics Engineers Inc., 巻 2017-January. p. 955-960 6 p. 8095888

研究成果: Conference contribution

6 引用 (Scopus)
2015

High efficiency SRM drive using a Quasi-Current Source Inverter

Suzuki, Y. & Akatsu, K., 2015 12 18, 2015 IEEE 2nd International Future Energy Electronics Conference, IFEEC 2015. Institute of Electrical and Electronics Engineers Inc., 7361450

研究成果: Conference contribution

2 引用 (Scopus)
2018
7 引用 (Scopus)
2017

Study of high-speed SRM with amorphous steel sheet for EV

Ueta, K. & Akatsu, K., 2017 1 30, 19th International Conference on Electrical Machines and Systems, ICEMS 2016. Institute of Electrical and Electronics Engineers Inc., 7837228

研究成果: Conference contribution

4 引用 (Scopus)
2016

MATRIX motor with individual control capability for iron loss suppression under flux weakening control

Hijikata, H., Akatsu, K., Miyama, Y., Arita, H. & Daikoku, A., 2016, : : IEEJ Journal of Industry Applications. 5, 2, p. 176-183 8 p.

研究成果: Article

5 引用 (Scopus)
2014

Vector control for switched reluctance motor drives using an improved current controller

Nakao, N. & Akatsu, K., 2014 11 11, 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014. Institute of Electrical and Electronics Engineers Inc., p. 1379-1386 8 p. 6953579

研究成果: Conference contribution

11 引用 (Scopus)
2019

Optimal carrier phase-shift angle on dual three-phase windings permanent magnet synchronous motor

Miyama, Y. & Akatsu, K., 2019 5, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 1362-1367 6 p. 8785258. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

研究成果: Conference contribution

2014

Advanced torque and current control techniques for PMSMs with a real-time simulator installed behavior motor model

Tanabe, R. & Akatsu, K., 2014 1 1, 2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014. IEEE Computer Society, p. 1234-1241 8 p. 6869744. (2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014).

研究成果: Conference contribution

2017
1 引用 (Scopus)
2012

An approach to generate high reluctance torque in an inset-type PMSM by square current excitation

Miyamasu, M. & Akatsu, K., 2012 12 1, PECon 2012 - 2012 IEEE International Conference on Power and Energy. p. 440-445 6 p. 6450253. (PECon 2012 - 2012 IEEE International Conference on Power and Energy).

研究成果: Conference contribution

3 引用 (Scopus)
2013

A principle of next generation spintronics motor

Furukawa, S. & Akatsu, K., 2013 9 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 1355-1360 6 p. 6579286. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

研究成果: Conference contribution

1 引用 (Scopus)
2015
2 引用 (Scopus)
2012

Consideration of CSI drive for SRM compared with VSI drive

Nagai, T., Ando, G. & Akatsu, K., 2012 10 3, Conference Proceedings - 2012 IEEE 7th International Power Electronics and Motion Control Conference - ECCE Asia, IPEMC 2012. p. 1087-1094 8 p. 6258967. (Conference Proceedings - 2012 IEEE 7th International Power Electronics and Motion Control Conference - ECCE Asia, IPEMC 2012; 巻数 2).

研究成果: Conference contribution

5 引用 (Scopus)
2017

Driver design for 3kW 13.56 MHz multiphase resonant inverter

Trung, N. K. & Akatsu, K., 2017 7 25, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017. Institute of Electrical and Electronics Engineers Inc., p. 170-174 5 p. 7992437

研究成果: Conference contribution

2012

Investigation of locked rotor test for estimation of magnet PWM carrier eddy current loss in synchronous machines

Yamazaki, K., Fukuoka, T., Akatsu, K., Nakao, N. & Ruderman, A., 2012 10 30, : : IEEE Transactions on Magnetics. 48, 11, p. 3327-3330 4 p., 6333012.

研究成果: Article

19 引用 (Scopus)
2016
10 引用 (Scopus)
2017

Five phase multi-layer drive with fault tolerant neuro-fuzzy features for safety critical applications

Di Tullio, A., Tursini, M., Parasiliti, F. & Akatsu, K., 2017 10 2, 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017. Institute of Electrical and Electronics Engineers Inc., 8056487

研究成果: Conference contribution

1 引用 (Scopus)
2019

The Study on Position Sensor Fault Detection and Algorithm Transition from Sensored to Sensorless Control for IPMSM

Lee, D. & Akatsu, K., 2019 5 1, ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia. Institute of Electrical and Electronics Engineers Inc., 8797094. (ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia).

研究成果: Conference contribution

2011

Design theory of a variable characteristic motor using compound magnetomotive forces

Kato, T., Akatsu, K., Shigeta, T., Nakano, M., Tsukamoto, M. & Arimitsu, M., 2011 9 26, : : IEEJ Transactions on Industry Applications. 131, 8, p. 1049-1058 10 p.

研究成果: Article

2 引用 (Scopus)
2015
2012

Design and online winding reconfigurations method of MATRIX motor

Hijikata, H. & Akatsu, K., 2012 12 17, 2012 IEEE Energy Conversion Congress and Exposition, ECCE 2012. p. 1330-1337 8 p. 6342662. (2012 IEEE Energy Conversion Congress and Exposition, ECCE 2012).

研究成果: Conference contribution

6 引用 (Scopus)
2018

The study on gain selecting method of position sensorless control algorithm for IPMSM

Lee, D. & Akatsu, K., 2018 2 9, 2017 IEEE 12th International Conference on Power Electronics and Drive Systems, PEDS 2017. Institute of Electrical and Electronics Engineers Inc., 巻 2017-December. p. 728-733 6 p.

研究成果: Conference contribution

5 引用 (Scopus)
2019

Basic experiment on high power transmission at 13.56mhz wireless power transfer for electric vehicle

Kuramoto, S. & Akatsu, K., 2019 10, 2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 8952531. (2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings).

研究成果: Conference contribution

2018

Scalability and Key Tradeoffs of Variable Flux PM Machines for EV Traction Motor Systems

Athavale, A., Reigosa, D., Akatsu, K., Sakai, K. & Lorenz, R. D., 2018 12 3, 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018. Institute of Electrical and Electronics Engineers Inc., p. 2292-2299 8 p. 8558007. (2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018).

研究成果: Conference contribution

1 引用 (Scopus)
2013

Design methodology for variable-flux, flux-intensifying interior permanent magnet machines for an electric-vehicle-class inverter rating

Limsuwan, N., Fukushige, T., Akatsu, K. & Lorenz, R. D., 2013 12 31, 2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013. p. 1547-1554 8 p. 6646889. (2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013).

研究成果: Conference contribution

18 引用 (Scopus)
2018

Multi-phase inverter-fed MATRIX motor for high efficiency driving

Hijikata, H., Sakai, Y., Akatsu, K., Miyama, Y., Arita, H. & Daikoku, A., 2018 1 1, : : IEEJ Transactions on Industry Applications. 138, 3, p. 257-264 8 p.

研究成果: Article

1 引用 (Scopus)
2012

Research on vibration analysis and noise-reduction technique of PM motor

Zeze, E. & Akatsu, K., 2012 12 14, Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. p. 458-463 6 p. 6349909. (Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012).

研究成果: Conference contribution

13 引用 (Scopus)
2019

Measurement method of the B-H characteristics in open circuit for Nd-Fe-B magnet

Hieda, N. & Akatsu, K., 2019 8, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8921989. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

研究成果: Conference contribution

2018

Carrier Harmonic Loss Reduction Technique on Dual Three-Phase Permanent-Magnet Synchronous Motors with Phase-Shift PWM

Miyama, Y., Kometani, H. & Akatsu, K., 2018 10 22, 2018 International Power Electronics Conference, IPEC-Niigata - ECCE Asia 2018. Institute of Electrical and Electronics Engineers Inc., p. 711-717 7 p. 8508020

研究成果: Conference contribution

4 引用 (Scopus)
2017

Experimental studies of variable leakage flux type IPMSM

Hijikata, H., Akatsu, K. & Kato, T., 2017 1 1, : : IEEJ Transactions on Industry Applications. 137, 9, p. 737-743 7 p.

研究成果: Article

3 引用 (Scopus)

A practical approach for electromagnetic analysis with the effect of the residual strain due to manufacturing processes

Sano, H., Narita, K., Zeze, E., Yamada, T., Kazuki, U. & Akatsu, K., 2017 2 13, ECCE 2016 - IEEE Energy Conversion Congress and Exposition, Proceedings. Institute of Electrical and Electronics Engineers Inc., 7854757

研究成果: Conference contribution

6 引用 (Scopus)