研究成果を検索

Aizawa, T., Mukai, T., Kanahashi, H. & Suwa, Y., 2004 1月 1, Explosion, Shock Wave and Hypervelocity Phenomena in Materials. Itoh, S., Hokamoto, K. & Fujita, M. (eds.). Trans Tech Publications Ltd, p. 13-20 8 p. (Materials Science Forum; vol. 465-466).

研究成果: Conference contribution

1 被引用数 (Scopus)

1983

SUPERPOSITION METHOD FOR NONLINEAR CRACK PROBLEMS.

Yagawa, G. & Aizawa, T., 1983 12月 1, In: ASTM Special Technical Publication. p. 354-369 16 p.

研究成果: Conference article › 査読

3 被引用数 (Scopus)

2004

Micro structure of N-implanted Ti thin films prepared by ion beam sputtering deposition

Muraishi, S. & Aizawa, T., 2004 5月 11, p. 155-162. 8 p.

研究成果: Paper › 査読

2 被引用数 (Scopus)

1800

Progressive steps in the platform science and technology for advanced magnesium alloys..

Kojima, Y., Aizawa, T., Kamado, S. & Higashi, K., 1800, In: Materials Science Forum. 419-422 (2003), p. 3-20

研究成果: Article › 査読

2004

Solid-state processing of nano-structured thermoelectric materials via bulk mechanical alloying.

Aizawa, T., Song, R., Kondoh, K., Yamamoto, A. & Obara, H., 2004 3月 8, In: Default journal.

研究成果: Article › 査読

1800

Experimental and theoretical evaluation on thermoelectricity for SPS-joined p-n module in Bi-Te system.

Kim, S. S., Yamamoto, S., Aizawa, T. & Yamamoto, A., 1800, In: Materials Transactions.. 46 [7] (2005), p. 1506-1513

研究成果: Article › 査読

2003

N-implanted Ti thin film prepared by ion beam sputtering deposition.

Muraishi, S. & Aizawa, T., 2003 6月 1, In: J. Ceramic Transaction.. 148 (2004), p. 155-163

研究成果: Article › 査読

1995

Shock reactive processing for direct synthesis of refractory metal aluminides from elemental powders

Aizawa, T., Kamenosono, S., Asakawa, Y. & Kihara, J., 1995 3月 1, In: Journal of Faculty of Engineering, The University of Tokyo. XLII, p. 57-101

研究成果: Article › 査読

1800

Thermoelectric material design in pseudo binary systems of Mg2Si - Mg2Ge - Mg2Sn on the powder metallurgy route.

Aizawa, T., Song, R. & Yamamoto, A., 1800, In: Materials Sceience Forum.

研究成果: Article › 査読

2015

Micro-texturing into DLC/diamond coated molds and dies via high density oxygen plasma etching

Yunata, E. E. & Aizawa, T., 2015, In: Manufacturing Review. 2, 2015015.

研究成果: Article › 査読

5 被引用数 (Scopus)

1996

Elasto-plastic contact analysis in rolling by two dimensional boundary element method.

Kamimura, Y., Aizawa, T. & Kihara, J., 1996 8月 1, In: Boundary Element Methods. (1996), p. 277-285

研究成果: Article › 査読

7 被引用数 (Scopus)

1995

Shock reactive mechanism for direct synthesis of titanium aluminides from element powder mixture.

Aizawa, T., Kamenosono, S., Tanaka, K. & Kihara, J., 1995 7月 1, In: Metallurgical and Materials Applications of Shock-Wave and High Strain-Rate Phenomena.. (1995), p. 645-652

研究成果: Article › 査読

2003

Friction and wear properties of CrAlN and CrVN films deposited by cathodic arc ion plating method..

Uchida, M., Nihira, N., Mitsuo, A., Toyoda, K., Kubota, K. & Aizawa, T., 2003 4月 1, In: Default journal. 177-178 (2004), p. 627-630

研究成果: Article › 査読

1997

Rational inverse analysis on determination of anisotropic elastic stiffness and crystallographic orientation of grains from surface wave velocity distribution:

Xu, Y., Aizawa, T. & Kihara, J., 1997 4月 1, In: International Conference on Advanced Technology in Experimental Mechanics. JSME-MMD.

研究成果: Article › 査読

2004

Solid state synthesis of nano-structured magnesium base thermoelectric materials.

Renbo, S., Muraishi, S. & Aizawa, T., 2004 10月 1, In: Proc. Powder Metallurgy World Congress-2004.. 4 (2004), p. 87-92

研究成果: Article › 査読

2005

Self-lubrication mechanism via the in-situ formed lubricious oxide tribofilm.

Aizawa, T., Mitsuo, A., Yamamoto, S., Muraishi, S. & Sumitomo, T., 2005 4月 1, In: Wear. 259 (2005), p. 708-718

研究成果: Article › 査読

91 被引用数 (Scopus)

1998

Shock synthesis of MoSi2-SiCp/SiCw composites from mechanical alloying pretreated precursors.

Aizawa, T. & Thadhani, N. N., 1998 4月 1, In: Ceramic Transaction. (Innovative Processing and synthesis of Ceramics, Glasses and compositesⅡ). 94 (1999), p. 273-284

研究成果: Article › 査読

15 被引用数 (Scopus)

1800

Microstructure evolution and superplasticity of rolled Mg-9Al-1Zn.

Mohri, T., Mabuchi, M., Nakamura, M., Asahina, T., Iwasaki, S., Aizawa, T. & Higashi, K., 1800, In: Materials Science and Engineering.. A290 (2000), p. 139-144

研究成果: Article › 査読

2006

Solid-state synthesis of hydrogen storage Mg₂Co alloys via bulk mechanical alloying

Wang, Y., Aizawa, T. & Nishimura, C., 2006 1月 1, In: Materials Transactions. 47, 4, p. 1052-1057 6 p.

研究成果: Article › 査読

9 被引用数 (Scopus)

1992

Controlled-fracture forming for alumina wires and plates I. Cold-working and resintering characteristic

Chen, X. M., Aizawa, T. & Kihara, J., 1992 4月 15, In: Materials Science and Engineering A. 151, 1, p. 45-52 8 p.

研究成果: Article › 査読

6 被引用数 (Scopus)

1994

Visualization and insitu characterization of deformed powder compact in cold isostatic pressure.

Watanabe, T., Aizawa, T. & Kihara, J., 1994 12月 1, In: Advanced Materials (MRS). 14A (1994), p. 97-100

研究成果: Article › 査読

22 被引用数 (Scopus)

1800

Influence of powder compaction and milling media on the formation of molybdenum disilicide by mechanically induced self-propagating reaction.

Yen, B. K., Aizawa, T. & Kihara, J., 1800, In: J. American Ceramic Society.. 79 (1996), p. 2221-2223

研究成果: Article › 査読

2011

Characteristics of the running performance in Japanese professional soccer players

ISHIZAKI, S. & YASUMATSU, M., 2011 7月 9, In: Default journal.

研究成果: Article › 査読

1800

Barrier-free processing of materials for environmentally benign life-cycle design.

Mabuchi, M., Halada, K. & Aizawa, T., 1800, In: Materials Transaction.. 43 [3] (2002), p. 285-291

研究成果: Article › 査読

In-situ synthesis of Mg2Si intermetallics via powder metallurgy process.

Kondoh, K., Oginuma, H., Matsukawa, S. & Aizawa, T., 1800, In: Materials Transactions.. 44 [5] (2003), p. 981-985

研究成果: Article › 査読

2011

Advanced fracture mechanics design of diamond-like carbon against delamination behavior

Aizawa, T., 2011 9月 1, In: Recent Trndes in Fracture Mechanics. 10, p. 1-32

研究成果: Article › 査読

2018

An afterburner-powered methane/steam reformer for a solid oxide fuel cells application

Mozdzierz, M., Chalusiak, M., Kimijima, S., Szmyd, J. S. & Brus, G., 2018 8月 1, In: Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2331-2341 11 p.

研究成果: Article › 査読

10 被引用数 (Scopus)

Flower-like BiVO₄ microspheres and their visible light-driven photocatalytic activity

Zulkifili, A. N., Fujiki, A. & Kimijima, S., 2018 1月 31, In: Applied Sciences (Switzerland). 8, 2, 216.

研究成果: Article › 査読

13 被引用数 (Scopus)

研究成果 のフィルタ

検索結果

研究成果のフィルタ