A method to analyze dynamics properties of transfemoral prosthesis

Le Van Tuan, Kengo Ohnishi, Hiroshi Otsuka, Yukio Agarie, Shinichiro Yamamoto, Akihiko Hanafusa

研究成果: Conference article

1 引用 (Scopus)

抜粋

The methodto compute gait cycle forces and moments acting on the hip and knee joints of a lower limb with a trans-femoral prosthesis were investigated. A 3D model of the lower limb with prosthesis was created using CAD software and based on MRI data and real size dimension. The transfemoral prosthesis was modelled as a coupled of links with two revolution joints at hip and knee joint. This coupled link was connected to a bar with translation joint to description the distance walked of people in gait cycle. All parts of the prosthesis were measured and a full-size 3D model was created. The kinematics parameters of a lower limb with a prosthesis were determined from motioncaptured system data. The reaction force was measured with a force sensor in the footplate. The 3D model of the prosthesis was exported to MatlabSimmechanics. The input data which are kinematic parameters were applied to calculate the forces and moments acting on the joints. The results of this study present a method to analyse the dynamic properties of transfemoral prosthesis including speed of the gait. It could be used to calculate the load transferred from the socket to the residual limb. They could also be used to design the structure of a prosthesis and optimize the dynamic characteristics of such a prosthesis.

元の言語English
記事番号02026
ジャーナルMATEC Web of Conferences
40
DOI
出版物ステータスPublished - 2016 1 29
イベント2015 International Conference on Mechanical Engineering and Electrical Systems, ICMES 2015 - Singapore, Singapore
継続期間: 2015 12 162015 12 18

ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)
  • Engineering(all)

フィンガープリント A method to analyze dynamics properties of transfemoral prosthesis' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用