A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

M. Ogawa, K. Motoi, T. Yamakoshi, M. Nogawa, Y. Yamakoshi, Masahiro Shibata, Y. Yamakoshi

研究成果: Conference contribution

抄録

The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

元の言語English
ホスト出版物のタイトルProceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS
ページ3994-3997
ページ数4
DOI
出版物ステータスPublished - 2011
イベント33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011 - Boston, MA
継続期間: 2011 8 302011 9 3

Other

Other33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011
Boston, MA
期間11/8/3011/9/3

Fingerprint

Blood pressure
Rapid prototyping
Pressure measurement
Biosensors
Computer aided design
Fabrication
Sensors

ASJC Scopus subject areas

  • Computer Vision and Pattern Recognition
  • Signal Processing
  • Biomedical Engineering
  • Health Informatics

これを引用

Ogawa, M., Motoi, K., Yamakoshi, T., Nogawa, M., Yamakoshi, Y., Shibata, M., & Yamakoshi, Y. (2011). A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. : Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS (pp. 3994-3997). [6090992] https://doi.org/10.1109/IEMBS.2011.6090992

A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. / Ogawa, M.; Motoi, K.; Yamakoshi, T.; Nogawa, M.; Yamakoshi, Y.; Shibata, Masahiro; Yamakoshi, Y.

Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. 2011. p. 3994-3997 6090992.

研究成果: Conference contribution

Ogawa, M, Motoi, K, Yamakoshi, T, Nogawa, M, Yamakoshi, Y, Shibata, M & Yamakoshi, Y 2011, A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. : Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS., 6090992, pp. 3994-3997, 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011, Boston, MA, 11/8/30. https://doi.org/10.1109/IEMBS.2011.6090992
Ogawa M, Motoi K, Yamakoshi T, Nogawa M, Yamakoshi Y, Shibata M その他. A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. : Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. 2011. p. 3994-3997. 6090992 https://doi.org/10.1109/IEMBS.2011.6090992
Ogawa, M. ; Motoi, K. ; Yamakoshi, T. ; Nogawa, M. ; Yamakoshi, Y. ; Shibata, Masahiro ; Yamakoshi, Y. / A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. 2011. pp. 3994-3997
@inproceedings{c404f00e2f40439e9cb63f6e0e501f88,
title = "A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement",
abstract = "The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.",
author = "M. Ogawa and K. Motoi and T. Yamakoshi and M. Nogawa and Y. Yamakoshi and Masahiro Shibata and Y. Yamakoshi",
year = "2011",
doi = "10.1109/IEMBS.2011.6090992",
language = "English",
isbn = "9781424441211",
pages = "3994--3997",
booktitle = "Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS",

}

TY - GEN

T1 - A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

AU - Ogawa, M.

AU - Motoi, K.

AU - Yamakoshi, T.

AU - Nogawa, M.

AU - Yamakoshi, Y.

AU - Shibata, Masahiro

AU - Yamakoshi, Y.

PY - 2011

Y1 - 2011

N2 - The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

AB - The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

UR - http://www.scopus.com/inward/record.url?scp=84055176217&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84055176217&partnerID=8YFLogxK

U2 - 10.1109/IEMBS.2011.6090992

DO - 10.1109/IEMBS.2011.6090992

M3 - Conference contribution

C2 - 22255215

AN - SCOPUS:84055176217

SN - 9781424441211

SP - 3994

EP - 3997

BT - Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS

ER -