A proposal of a method for prototyping M2M/ IoT systems based on ideas and its applications

Nobuhiro Ohe; Shin Dosaka; Shinji Kitagami; Yousuke Kaneko; Masahiro Inoue; Tsuyoshi Nakajima; Tetsuo Shiotsuki; Hisao Koizumi

doi:10.1541/ieejeiss.137.1402

A proposal of a method for prototyping M2M/ IoT systems based on ideas and its applications

Nobuhiro Ohe, Shin Dosaka, Shinji Kitagami, Yousuke Kaneko, Masahiro Inoue, Tsuyoshi Nakajima, Tetsuo Shiotsuki, Hisao Koizumi

研究成果: Article › 査読

1 被引用数 (Scopus)

抄録

M2M (Machine to Machine) / IoT (Internet of Things) systems are expected to be used in various application areas such as social infrastructure, industrial automation, and health and medical care. Prototyping of M2M/IoT systems is an effective way to embody the idea on the systems and to examine their feasibility. This paper describes a method for prototyping of M2M/IoT systems, which consists of how to embody the idea of them, how to select their components and how to build them using a framework, so that people can easily construct M2M/IoT systems to solve their problems. This paper also describes three different applications of this method, which proves its effectiveness.

本文言語	English
ページ（範囲）	1402-1413
ページ数	12
ジャーナル	IEEJ Transactions on Electronics, Information and Systems
巻	137
号	10
DOI	https://doi.org/10.1541/ieejeiss.137.1402
出版ステータス	Published - 2017

ASJC Scopus subject areas

電子工学および電気工学

文献へのアクセス

10.1541/ieejeiss.137.1402

他のファイルとリンク

引用スタイル

@article{208234fb636d4e3a9a7c07340650273e,

title = "A proposal of a method for prototyping M2M/ IoT systems based on ideas and its applications",

abstract = "M2M (Machine to Machine) / IoT (Internet of Things) systems are expected to be used in various application areas such as social infrastructure, industrial automation, and health and medical care. Prototyping of M2M/IoT systems is an effective way to embody the idea on the systems and to examine their feasibility. This paper describes a method for prototyping of M2M/IoT systems, which consists of how to embody the idea of them, how to select their components and how to build them using a framework, so that people can easily construct M2M/IoT systems to solve their problems. This paper also describes three different applications of this method, which proves its effectiveness.",

keywords = "Cloud service, Gateway, IoT device, M2M/IoT system, Prototype, Sensor",

author = "Nobuhiro Ohe and Shin Dosaka and Shinji Kitagami and Yousuke Kaneko and Masahiro Inoue and Tsuyoshi Nakajima and Tetsuo Shiotsuki and Hisao Koizumi",

note = "Publisher Copyright: {\textcopyright} 2017 The Institute of Electrical Engineers of Japan.",

year = "2017",

doi = "10.1541/ieejeiss.137.1402",

language = "English",

volume = "137",

pages = "1402--1413",

journal = "IEEJ Transactions on Electronics, Information and Systems",

issn = "0385-4221",

publisher = "The Institute of Electrical Engineers of Japan",

number = "10",

}

TY - JOUR

T1 - A proposal of a method for prototyping M2M/ IoT systems based on ideas and its applications

AU - Ohe, Nobuhiro

AU - Dosaka, Shin

AU - Kitagami, Shinji

AU - Kaneko, Yousuke

AU - Inoue, Masahiro

AU - Nakajima, Tsuyoshi

AU - Shiotsuki, Tetsuo

AU - Koizumi, Hisao

PY - 2017

Y1 - 2017

N2 - M2M (Machine to Machine) / IoT (Internet of Things) systems are expected to be used in various application areas such as social infrastructure, industrial automation, and health and medical care. Prototyping of M2M/IoT systems is an effective way to embody the idea on the systems and to examine their feasibility. This paper describes a method for prototyping of M2M/IoT systems, which consists of how to embody the idea of them, how to select their components and how to build them using a framework, so that people can easily construct M2M/IoT systems to solve their problems. This paper also describes three different applications of this method, which proves its effectiveness.

AB - M2M (Machine to Machine) / IoT (Internet of Things) systems are expected to be used in various application areas such as social infrastructure, industrial automation, and health and medical care. Prototyping of M2M/IoT systems is an effective way to embody the idea on the systems and to examine their feasibility. This paper describes a method for prototyping of M2M/IoT systems, which consists of how to embody the idea of them, how to select their components and how to build them using a framework, so that people can easily construct M2M/IoT systems to solve their problems. This paper also describes three different applications of this method, which proves its effectiveness.

KW - Cloud service

KW - Gateway

KW - IoT device

KW - M2M/IoT system

KW - Prototype

KW - Sensor

UR - http://www.scopus.com/inward/record.url?scp=85030178150&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85030178150&partnerID=8YFLogxK

U2 - 10.1541/ieejeiss.137.1402

DO - 10.1541/ieejeiss.137.1402

M3 - Article

AN - SCOPUS:85030178150

SN - 0385-4221

VL - 137

SP - 1402

EP - 1413

JO - IEEJ Transactions on Electronics, Information and Systems

JF - IEEJ Transactions on Electronics, Information and Systems

IS - 10

ER -

A proposal of a method for prototyping M2M/ IoT systems based on ideas and its applications

抄録

ASJC Scopus subject areas

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル